1 / 16
G-Mezor – Ender 3 5015 Fan Duct — zdjęcie 1
1 / 16

G-Mezor – Ender 3 5015 Fan Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My take on the 5015 Fan Duct by Bosco Lau, remixed to be held by bolts instead of magnets, with a BL-Touch mount.

Ocena
5 / 5
Polubienia
11
Pobrania
127
Wydruki
2
Wyświetlenia
526
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

G-Mezor, my take on the 5015 Fan Duct by Bosco Lau, remixed to be held by bolts instead of magnets, complete with a BL-Touch side mount. The duct is also secured by a stabilizer that is placed from the back with an M3 bolt. I improved the 5015 fan attachment, which is now being held in place by two M4x19 bolts. Now there is more space for wiring and cables as well. 

Print in PET-G or similar, PLA will most likely melt!! Use supports only for the center overhang under 4010 fan, otherwise not needed.

BL-Touch offsets:

x_offset: -30
y_offset: -32

If you have any questions, leave them in the comments, please!

Tagi