Hitachi Unified Storage (HUS) SFF 2.5" Caddie for x24 SAS Chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2.5" drive caddy for the x24 bay Hitachi SAS chassis. 200mm OEM caddies are expensive and hard to source.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This remix adapts the original caddy from the HP series servers it was designed for to a Hitachi HUS (Hitachi Unified Storage) SFF 24 bay drive chassis.
The drive bays are deeper than typical Dell or HP servers and hard to source (200mm). If you can find them they're unnecessarily expensive.
There are several modifications from the original. The most important to note, other than being designed for a different system, is that the light pipe redirector now has a swappable rear piece. This should be adjusted to fit your needs. IE: it might not align with your chassis' LEDs, so you'll need to adjust it.
The photos show a couple revisions of the caddies in the chassis; they fit well.
I print on a Prusa XL primarily for speed and the gcode represents that but there is no reason these couldn't be printed on a smaller bed printer like the Mk3 or 4, etc.
