1 / 13
Creality SpacePi Space Pi X4 X4L Filament Spool Guide Fix - cliped — zdjęcie 1
1 / 13

Creality SpacePi Space Pi X4 X4L Filament Spool Guide Fix - cliped

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament spool guide for Creality Space Pi X4 dryer – prevents skewing and jamming of light, nearly empty spools.

Ocena
5 / 5
Polubienia
174
Pobrania
1086
Wydruki
28
Wyświetlenia
4455
Oceny
29

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A simple but suitable filament spool guide for the Space Pi X4 and X4L filament dryer from Creality. This prevents the spool from jamming when it's almost used up. Because the spool is too light, it can cause the spool to skew. This can lead to printing problems or crashes.

I've had the problem a few times now where almost empty spools would jam in the dryer during printing, causing a printing error. So I looked for a simple solution that didn't require extra spool weight. Since there wasn't anything available on the market yet, I designed it myself. 

I created two versions. One is attached with a screw. The other simply clips in. Both fit perfectly. However, I recommend the clipped version, as you don't have to drill a hole. :D

Printing Settings:

  • Material: ASA, NYLON, PC

  • 0.2mm Layer high

  • 3-4 perimeters

  • min. 25% Infill

  • Organic (Tree) Supports only for the roller anchor

  • Use a Brim

The pictures show how the guide is clipped in. First, the retaining clip is inserted at the front and then clipped into the back. This holds very well. And can be easily removed again. 

I also designed a Heat Shield for the Space Pi x4 that is compatible with both versions. This prevents excessive hot air from hitting one spot on the spool.

 

Tagi