GIRO - Titan Extruder Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GIRO - Titan Extruder Bracket General This Titan Extruder Bracket is inspired by the design of Navame. I wanted to…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRO - Titan Extruder Bracket
General
This Titan Extruder Bracket is inspired by the design of Navame. I wanted to make it fit and look better on my printer and created a similiar bracket for the Titan. These brackets does fit for the TEVO Titan Extruder and the Trianglelab Titan Extruder.
There are two versions available for the Titan Extruder. The first version has a middle mounting option. The second version has a side mounting.
These brackets are designed to be mounted on a 40x20 or 40x40 aluminium extrusion profile.
Printing
Print this bracket with a lower speed, for example 45 mm/s, to get a more accurate printing. Also print with 100% infill to get maximum strengthness of your bracket. You might need the support structures for the center hole where the shaft of the stepper motor will be pushed through.
Additional Information
Let me know if there are any kind of problems with these brackets. I will try to help and if neccessary correct the designs. I appreciate any kind of feedback to these brackets.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
