1 / 5
(LEGACY) Lack Tilt Drawers — zdjęcie 1
1 / 5

(LEGACY) Lack Tilt Drawers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These little tilt drawers allow for quick easy access and are great for storing your knickknacks on your lack enclosure.

Ocena
4,8 / 5
Polubienia
211
Pobrania
487
Wydruki
10
Wyświetlenia
3452
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Check out the new Gen2 Models HERE

 

What!?… You had extra screws after assembling your printer! Hurry, you need a place to hide them!

These little tilt drawers allow for quick easy access and are great for storing your knickknacks on your lack enclosure. 

*Also works great as an addition to any workbench

Features:
• Seamless alignment for that oh-so-clean look.
• Drawers are easy to tilt and remove

Print instructions

INTRO
The Tilt Drawers are part of my Lack Drawer series meaning they will pair with them. This version of the Tilt Drawer is able to fit only in single row layouts. (right side tilt drawer coming soon)

HARDWARE
• Screw Driver (Long narrow screw driver recommended)
• Screws: 3x12mm wood screw or #4 x 3/4 inch screws
• Drill bit that is smaller diameter than the wood screws

• Use printed templates to mark the hole locations on the surface you are mounting the drawer case to.


• Drill out marked locations
(Tilt Drawers template appears different than this image)


• Screw drawer case in place.

 

• Tilt the drawer and align the notch on each side with the grooves in the case. Slide drawer into place until you feel it drop in place. (removal is the opposite of this)

 

Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%

 

 

 

 

 

Compatible Prints:
Lack Enclosure Drawers
Lack Enclosure Drawers - Prusa Mini Edition

Tagi