Battery Organizer Trays (D, C, AA, AAA, 9V, CR2032)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery trays with textured walls and bottom to fight warping. Sizes for D, C, AA, AAA, 9V, CR2032.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A set of battery organizer trays. So far there are three sizes. I may add more if requested.
Small tray — AA and AAA
Medium tray — AA, AAA, and 9V
Large tray — D, C, AA, AAA, 9V, and CR2032 coin cells
All three use textured sidewalls and a textured bottom. Beyond looking nice, the texture is functional: it breaks up the large, flat, monotonous surfaces that tend to cause warping on large, flat prints. Long, uninterrupted extrusions on bottom layers and tall flat walls shrink as they cool, and that shrinkage is what lifts and peels corners off the bed. Breaking those surfaces into smaller textured facets relieves that stress and helps the trays come out flat.
Print notes:
No supports needed
Any material works; PLA, PETG, or ABS/ASA are all fine
The texture is forgiving, so you don't need perfect adhesion for good results