1 / 2
Grejig System: Diagonal Cutter Saddle — zdjęcie 1
1 / 2

Grejig System: Diagonal Cutter Saddle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple saddle for flush cutters/diagonal pliers/snips

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

One upstand the jaws straddle. It tapers 27 to 20 mm so a tool seats at whatever depth its own jaw gap picks, and a ridge along the front edge stops it sliding off.

Clips onto an IKEA GREJIG wall grid with no screws, no glue and no extra

hardware — tilt it on and it snaps home.

Supports ON — tree (auto), 45 degrees. Print lying on its side. The clip's over-hook overhangs whatever else does, so this is not optional.

Compatible with IKEA GREJIG. Not affiliated with, endorsed by, or sponsored by

Inter IKEA Systems B.V.

Tagi