Flip Switch Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flip switch guards for 6mm threads. Can be scaled up to fit 12mm switches.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Flip switch guards for 6mm threads. Can be scaled up to fit 12mm switches. Three main variants, type 1 is a cylinder, type 2 a circle and type 3 an open box. It works very well for the arming switch which you want to protect against unintentional use.
I prefered type one and have made some variants of it. short and long depending on the switch size. Also a custom long variant designed to fit the rear left switch of a Frsky Taranis x9d. Also a custom slimmer variant for the Rangemaster GX12.
I've designed a tool for easier install of the hex nut usually supplied with these flip switches.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6