36 modeli
Plant clip printed in PETG on 0.3 mm with 8 outer perimiters for fastest printing (and not making your printer shake as much). I could fit 15 on my build plate at a time (see photo) [update] I added a ring to print seperately to put all…
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
Modular system to connect 10mm sticks I bought on Amazon to create a support for a raised bed cover. I used it to create a rack where a net can hang off of. To cover our raised beds in the garden. Created various corner pieces (different…
Level up your Knucklebones game with this epic 3D-printed dice case and gameboard! This sleek, compact design features a magnetic closure to keep your dice safe during all your adventures. The lid doubles as a dice rolling tray, making it…
A 2020 Extrusion mount for Raspberry Pi 3B. I used it on my HyperCube printer for my OctoPrint (Octopi) server running on my Pi. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jzz14atp9dk Print…
SUNLU FilaDryer S1 [UPDATE] I made a version 3 where the back of the fan holder is closed and there is a small indent for the power cable to route through. For a much cleaner look ;) Also added a G-code file for a Prusa MK3S+ with eSun…
I was inspired by Daniel Stahovic's video on YouTube https://www.youtube.com/watch?v=6FG4O5l9XpE&t=8s For my SUNLU filament drybox (S1) I created a holder so I could add a Hygrometer and tempsensor inside the box. The filament is still…
For my wife I made these simple name tag sticks for in her planter pots. Dimensions: 115 mm x 10.6mm x 3mm I printed them in PLA+ (plus) with the following settings: 210C/70C first layer 210C/60C rest first layer 0.3mm / rest 0.2mm 3…
Created a strawberry version based on my plant support ring, to have the strawberries off the ground while they grow. Plant support ring: https://www.printables.com/model/491573-plantsupport-medium-and-large Each ring needs three sticks…
Original one was to fragile for my taste, so I decided to make my own. I used these pulleys:…
[UPDATE 2.32] I added LM10UU version as well (incl. LM10UU Z-Clamp). [UPDATE 2.31] I added LM8LUU version as well. With a single Z motor the bed kept tilting forward (8mm rods). I made this update to stop this forward tilt and make it…
printed in PLA+ with 0.4 nozzle with 0.2mm layers
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/3wNaN3MTgyv Print instructions Category: 3D Printer Parts Summary This thing was made with Tinkercad. Edit it online…
I use a 12V distribution/terminal block (to make 1 connection into 12=0 connections) and I needed some cable tention release. This is what I've come with up so far.…
The Thin Rip Jig from Saw-Mate did not fit on my DeWalt DWE7492 saw table. It would not stay in place and I had to add ducttape on the miter slider. I designed this 3D printed part and it fixed it for me. I created the slider part in…
I created this PSU shroud in Fusion 360. I was inspired by Colin Hill from the UK, but I wanted a shroud without the fan option and also a barrier that stops the shroud from moving down, by using the top of the PSU to stop it. I printed…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2HNmlGwKGhG Print instructions Category: 3D Printer Parts Summary This thing was made with Tinkercad. Edit it online…
A modular plant support system based on 8mm wooden sticks (bought mine from Amazon) Each ring needs three sticks (8mm). First three go into the ground, second set can be inserted in the ring on top and can hold another ring, and so on.…
!!! PLEASE BE SAFE AND MAKE SURE THE SCREWS DO NOT TOUCH THE INTERNAL CIRCUITRY OF THE PSU !!! To mount my 30A PSU under my HyperCube printer I designed these brackets. Print instructions Category: 3D Printer Parts Summary !!! PLEASE BE…
I made this because the fan of my part-cooling made a lot of backdraft that cooled the part on the bed when it moved across the bed. Large prints would release from the bed because of this draft. This 40mm fan deflector redirects the…
I combined two cases to one better one. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kd0tn07MRdn Print instructions Category: 3D Printer Parts Summary I combined two cases to one better one. This…
This is my design for mounting the E3D Titan Extruder as a bowden extruder to a 2020 frame. I use it for my HyperCube. The small filament guide helps to feed the filament straight into the Titan. This thing was made with Tinkercad. Edit…
I have not printed these and tried them out, but I designed these for a future build of the HyperCube model. For the total build you need 16 Normal brackets and the special brackets I designed. They should work with the Tech2C parts. If…
To close the bottom of my HyperCube printer I designed these clamps that hold a nut and bolt to fasten a 4mm plexiglass plate. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fHIDJDM10Mj Print…
Small clips to manage some cables in the 2020 groove. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cyuMcVzvN7G Print instructions Category: 3D Printing Summary Small clips to manage some cables in…
For my Tukkari TS model Prusa enclosure I created this camera mount to place my Logitech C270 webcam in the middle above the door, inside the enclodure with a clear view of the print bed. I printed in 0.2 layer height, 25% infill and no…
A modular plant support system based on 8mm wooden sticks (bought mine from Amazon) With the strips the sticks can be connected in a row, or in a column surrounding the plant. System is modular and in two sizes (medium and large) to…
[UPDATE 3.0] Tech2C made a new REMOVABLE Hot-end mount for the 12 month anniversary of the HyperCube. Because I remixed his previous design to fit a 18mm sensor straight on the mount, I also remixed his new design. Also added an optional…
[1.3 update] Added cable tention reliefs under the connections. 2020 Extrusion mount for my MKS Base v1.5 board and 80mm Fan This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0gDgUiS3XEy Print…
It is a variation on my 2020 mount case for the Full graphics LCD display. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6iAgSyXmXyM Print instructions Category: 3D Printer Parts Summary It is a…
Because the original clamps are a little hard to print because of bridging, I designed this Y-clamp that can be printed up side down. Also made a X-clamp for the LM8UU bearing X-Carriage. This one can also be printed up side down. This…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/javBTKNcHk8 Print instructions Category: 3D Printing Summary This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/javBTKNcHk8
Since there is nowhere to attach the cabled from the hotted and such, I designed this little bracket to strap the cables to with some rips. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ehcg7rvZmW4…
Still prototyping this design. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5GDrlIpBeia Print instructions Category: 3D Printer Parts Summary Still prototyping this design. This thing was made with…
On the original Tech2C parts my end-stop for the X axes did not work reliable enough. Therefore I made this extra part to help the end-stop hit more reliably. This thing was made with Tinkercad. Edit it online…
Made both fan ducts using http://www.thingiverse.com/thing:1591912 by sobezuki, published May 27, 2016 And the 30-40 version I also used http://www.thingiverse.com/thing:1759396 by Galane, published Sep 8, 2016 I added an 18mm inductive…
To wszystkie aktualnie dostępne wyniki.
![Plant tagging sticks [DUTCH] v1.0](https://media.printables.com/media/prints/61569/images/645056_85c33a5b-6e87-4660-8ef4-d00a19304f24/plant-tagging-stick-v10.jpg)
