Liczymy pasujące modele…
A small heart in a 12 cm big 3D heart. You can place the heart on the stand ore use it alone. A nice way to present a message, gift or picture. Please use support unter the heart and place the heart on the small bolt unter the heart when…
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
This 8 by 8 by 5 cm junction box (for antenna and speaker cables) features two inputs and can be securely attached to a surface using up to four screws. Seals for both cable entries and holes for securing screws can be provided with…
This is the new version of a 12 cm big 3D heart with a second small heart in the big heart. You can place the heart on the stand ore use it alone. A nice way to present a message, gift or picture now in combination with a flower. Put your…
The remover has no blade it uses some little PETG teeth as a saw. You can print the handle and the remover in different colours and after that you can screw both parts together. The 10 mm screw ist well protectet. It is a PETG "appliance"…
New junction box with 3 inputs. The first model has only two. This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features three inputs and can be securely attached to a surface using up to four screws. Seals…
This screwable Adapter/Connector (5 cm) connects two junctionboxes (Bruno Germany). It is designed only for my boxes. In the case you need more then 4 inputs connect two boxes and you solf the problem. This 8 by 8 bfy 5 cm junction boxes…
The tool wall (Brunos) consists of individual modules measuring 18 cm by 18 cm in width and 5 mm in height, each with 16 attachment points for various holders such as hooks. The modules are connected to each other using a concealed…
The cable mounting consist of two parts. You can fix the bottom part with two screws e.g. direct on a wall, put a cable in the holder an slide the top cover in the holder. The holder consists a small compression spring that will fix the…
Simple large battery box with 9 different compartments for standard batteries and battery blister packs. From AA to 9 volt types find their place. A compartment can be additionally divided using a separator. No material is needed to…
With this transport mount, your usb cable will survive even longer trips. The bracket is designed for short and thinner usb cables with different connectors (have a look at the pictures). You need some support structures for the two…
With this plug (TPU material) you can close unused openings from my junction box. This 8 by 8 by 5 cm junction boxes from “Bruno Germany” (for antenna and speaker cables) features two or three inputs and can be securely attached to a…
The headband consists of two parts (headband and detachable crown) and can be quickly printed without additional support structures. I printed both parts with my H2D printer (PETG or PLA worked well). Both components are simply assembled…
Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket you have a better "home" for a power strip. Fix it with two or four screws on the wall and place a suitable…
New small junction box (only 45 by 80 by 50 mm) with 2 inputs. This junction box (for antenna and speaker cables) features two inputs and can be securely attached to a surface using up to four screws. Seals for both cable entries can be…
New version of the Screwable round box with plenty of space for antenna-/ speaker cables and plugs. You can attach the box to the ceiling or a wall with up to 4 screws. The cover box consists of a lower removable part and a cover plate.…
The new Prusa case comes without a fire extinguisher, but I think it's a good idea to install a smoke detector and fire extinguisher directly into the case, especially if you're not always watching the printer. I used the "Fire Cookie”…
This vase is a nice design object for dry flowers. I have additionally added an insert for this vase with thicker walls and surface and I think it could be waterproof (I will test it in the next few days). I set the PRUSA slicer to four…
Screwable round box with plenty of space for antenna / speaker cables or connection plugs. You can attach the box to the ceiling or a wall with up to 4 screws. The cover box consists of a lower removable part and a cover plate. This…
Print it and press it on the cardboard box. It is often so helpfull to find the best colour/material for your next print. You can use it also for other cardbord boxes. Next sign for PETG will follow. You do not need support material. I…
With this small model of a anemometer you can observe the wind speed or count the revolutions of the cups in a minute. It is also a nice model for experiments or explanations or you can check if it is windy outside, The axis, connector…
This storage system for small pliers or other tools has space for up to 4 parts and its an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. You will find the modules and other parts…
Do you need a place for your shampoo and your shower gel bottle in your bathroom? With this single or double holder you have a storage for both direct on the shower rod. You can fix each holder with a special mechanism direct on the…
A round baseplate with 7 seperate round pill boxes. All boxes have a cover with a special closure, this means that the cover is really tight. So it is easy to transport the box you need to an other place. You can see a short information…
This box is based on the idea of "Whity" (Printables, Rugged Box), a very nice project. After seeing it, I designed a completely new box with new hinges, offset of the (optional) rubber gasket into the inside of the box and "flat"…
Your Fitbit charging cable for the SENSE will fit in this stand. A save place during you are charging the smartwatch. I have printeted the stand with PETG and have used some support structures (have look at the pictures). I have designed…
This round cable clamp is ideal for ceiling or wall mount. It is wide enough for 8 mm cable or a rope. You can fix the base part with a screw e.g. on the ceiling, place the cable / rope in the slot and srew the round cover on the base.…
This catapult is a small toy. It consists from only 8 printable parts. From the spring to the ‘screw’ you need only filament. I have printeted the parts with PETG and for some parts I used support structures. I added pictures so you can…
This indoor golf putting exercice tool consists of four parts (LO, RO, LU, RU and has a overall size of 40 by 40 cm. The individual parts are held together by integrated connectors. The Putting trainer has a standard hole (11 cm) with…
It is easy to print. You do not need any support structures. I have printed it with PETG and also with PLA. With 0.3 mm it looks fine and the print time with the MK3 is not so long. I have designed the bowl with Fusion 360.
This 12 cm big heart sits on a rotating stand and has one option of placing a pen or something like a dry flower in a small, round opening on the top of the heart. A nice place to present a gift or also for your pen. Please use support…
This storage system for screwdrivers or other tools has space for up to 22 parts and its an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. You will find the modules and other parts…
The new version has now two brackets . One for a photo and a second e.g. for a letter. I have removed the hole for the rotating stand and made some other improvements. The big heart is sitting on a stand. You can utilize the big slot in…
Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket / stand bracket you have a better "home" for a power strip. Fix it with two or four screws on the wall or…
After a longer absence from my home and freezer I was never secure that there was no power outage and the food was thawed and refrozen after the power was back. The designed modul can help me in the future to detect a malfunction during…
Print it and press it on the cardboard box. It is often so helpfull to find the best colour/material for your next print. I have designed it for a Prusament cardboard box, but you can use it also for other cardbord boxes. There is also a…
Modular mounting system for filament spools (Bambu Lab, Prusa ...) and closed boxes. The plug-in system is very sturdy and with about 130 grams for all parts, quite lightweight. A filament holder consists of the base and two spacers of…
This expansion module with a size of 18 by 9 cm gives you more flexibility for the storage system (Brunos) . Each module is secured to a surface with up to two screws. Unused openings can be covered with caps. The modules are connected to…
This universal box (6 by 6 by 7 cm) has space for different parts / tools and it is an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. You will find the modules and other parts at…
A quick to print decoration for the birthday cake. No support material. Have printed it with PLA and PETG and its designed with Fusion 360.
This storage system for big small pliers or other tools has space for up to 4 parts and its an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. I have made also a holder for small…
This storage system for a hammer or other tools is an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. I have made also holders for small/big pliers, screwdrivers and so on.. You…
Easy and quick to print. This small box is the right ülace for a gift or loveletter. You do not need to print any support. It is designed with Fusion 360
A nice small project with some moving parts and a nice model to show what is possible with your 3D printer. You dont need to press this clip closure to open it, only turn the knob 45 degrees to the right (this releases the inner part) and…
Have you ever forgotten your important medication at home and you need it now but you have no possbility to buy it. With this “COIN” in your wallet you have a save place for a small amount of your medication until you found a place to buy…
In Germany we say “Messerbank” to this small tool, that means “Knife Bench”. A good way to discribe how it works, this rest, for all your used cutlery, will protect your tablecloth for dirt. I have used support on some places of the…
A helpful and versatile stand for infomaterial, visitcards or other paperwork. material stand (15 by 10 by 3 cm) is easy to print, but you need support material. I have used PLA for this model because I can remove the support material…
You can fix this drawer with the bracket direct under your workbench. The drawer is designed for all the allen keys and the wrenches you have received with your new MK4 printer and offers space for a brush and needles to clean nozzles. If…
This holder is designed for Q-TIPS. The “adapter” is connected to the toolwall and then you can connect the qtip holder. It is an accesory for “Brunos - Tool Storage System”, it fits with his holder (adapter) easyly in the wallmounted…
Stylish "pen holder" with extra space for an SD card and USB devices and some compartments for all things on the desk and with 3 integrated holders for pens or pencils on the front. No support is needed. I designed the pen holder with…
70 mm high tin nice design with lid. Both parts dont need any support material during the print. The models are designed with Fusion 360 !
This holder is designed for different tools. The strong base is made of PETG the flexible part of TPU. It is an accesory for "Brunos - Tool Storage System)- It fits with his holders (base part) easyly in the wallmounted modules. You will…
The drawer system consists of two parts, the base and the drawer. You will find also the 3MF file for the drill holder / stand below. Support structures are required for both prints (nit for the drill stand). The Dremel Drill stand is…
A simple stand for some basic screw samples. You can place screws from 3mm to 10mm in this stand for the case you want to check that your printed threads, nuts or screws are fine. I have used the new fuzzy surface option from the new…
This hearts are for decorations or as a luck charm. Put some on a table and you do not say any words. The 2 cm high heart is easy and quick to print. The best way is to print the heart is upway with some support (please have a look at the…
A good place for your cordless screwdriver and a set of bits. I use it for my BOSCH screwdriver. You do not need any suport structures during the print. I have added the gcode for PLA and PETG both are working fine. I have used FUSION 360…
This high heel model is, on one hand, a small vase and at the same time a gift box. The box can be closed with a lid. The shoe is designed at its original size. The vase is not waterproof without post-processing. The model requires…
Have you ever put money in just one envelope? Maybe you've found a better place with this heart-shaped money clip. I printed it with PETG (0.2mm) and put some carrier material under the clip. For the project I used FUSION 360
You can fix the holder with two screws on a surface. The holder is fine for fire extingushers with 7.5 cm diameter. You need some support material to print the holder (please see the attached pictures). The holder is designed with Fusion…
Holder / shelf for a DREMEL drill with accessory holder (slots and two compartments for spareparts). The slots fits for small parts (3 mm). The object can be printed without any support structures. The Modell is designed with Fusion 360.
The round presentation box, decorated with a decorative edge, has a diameter of 18 cm and a height (with lid) of 2 cm. The transport or presentation box features a design in the base that is specifically tailored to a necklace. The lid,…
This external housing (new version) has space for a small standard humity / thermometer modul. You can fix it with only one 3 mm screw on a existing hole in the i3mk3s metal frame without disturbing (I hope) other moving parts. The…
The Smart 4 router cannot be mounted directly on a wall like its predecessors. Presumably, this affects the antennas. This wall mount could safe this problem. The base of the Smart 4 is attached to the bracket using rails (simply slide it…
The cream cheese cups are often more informative then beautiful. Put the cup into the cover and you have a nice object on the table. There are so many different sizes of packaging (shape and height). My first cover fits perfectly for some…
Bottles with a diameter of up to 10 cm can be kept cold for longer in the bottle cooler. It is designed with double walls, so that an insulating layer of air is located between the bottle and the outer wall. The cooler has an extra thick…
Cover for holes in the door frame after the hinge has been removed and now you see the holes. it fits perfectly into holes with a diameter of 7 mm. Don't walk to the hardware store - Print it at home. Very easy to print in PLA or PETG.…
The door of a room is removed and the two openings remain in the frame. This cover covers the two openings for the door lock in the door frame. It is designed for German doors and easy to print. I have also designed a cover for the hinge…
Do you have guests or friends and they ask frequently for some informations e.g. the SSID or password from the local WiFi? Use the changeable info plate (54 to 42 mm) from this stand to give the data to them. You own a B+B ? put it on the…
There will be a new version tomorrow. Please use this one because it has a better ventilation to measure the humidity. The new case has also space for 3 SD Cards and special holders for tools. This external housing has space for a small…
The bicycle was too big for the birthday table and only a picture to boring, but the small modell fits perfectly there. I designed it with Fusion 360 and printed it in two colors on my Bambu Lab H2D with PLA. No support is needed.
The clip prevents the filament for unintenional unspooling and later problems during the use. This littel part is designet for the ‘Prusamentspool’ with a wallthickness of 4.5 mm and a 1.75 mm filament. Press the clip on the spool and…
50 mm high doorstop with space for a 5 mm screw. This doorstop consists of three parts. A screwable base plate, an attachable stable core and a shell made of flexible TPU. You do not have the need for support material. Please use 60 % or…
This 15 cm tall Christmas box in the shape of a Christmas tree consists of a lid and a base. It is suitable as packaging for various gifts. The model was designed with the help of Fusion 360 and does not require support structures when…
It is an adapter that is simply placed on the defective mouthpiece. A simple part that shows how easy it is to produce a spare part in minutes with 3D printing. The TRIOLA is a musik instrument from the former DDR and was especilly used…
A simple and quick-to-print holder. The holder can be fixed to the edge of a surface with 3 screws (with tape it is not so strong !). No support material is required during the printing. The model was designed with the help of Fusion 360.…
An example how easy you can design a part when something ist broken. You only need a vernier caliper and a good design software. I have used Fusion 360 for the designing part an the Prusa slicer. For the stand I used 20 % of infill only…
Bowl with many hearts for gifts or jewelry. The 15 cm bowl can be closed with a lid. The bowl requires support structures for the areas with hearts. The design was created with the help of Fusion 360 and printed with PETG on the Bambu Lab…
This insert is designed to hold up to three cooling pads (see photos) and fits perfectly into my wine/bottle cooler (Bruno Germany). Despite the double-walled construction of the bottle coolers, the cooling pads keep the drinks cold for…
To wszystkie aktualnie dostępne wyniki.
