Liczymy pasujące modele…
Design Update The red clip shown on the right side of the second image is the KLIPPT Locking Cable Clip, which succeeds this earlier KLAMMA model. KLIPPT introduces a separate, versatile base plate that enables multiple mounting options,…
In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…
We are thrilled to announce the release of our successor to KLAMMA, the culmination of countless hours of design work and dedication. This new version represents a significant milestone in our journey, building on the strong foundation…
Additional Hardware None. Great care was taken to make this model fully printable without any fasteners or glue. Print Settings Use your favourite print profile with a 0.4mm nozzle. For all parts, set the ‘ Seam position ’ to ‘Random’, to…
Print Instructions Print the parts as listed down below. All STL files are in their respective print orientation! I used the default 0.20 mm QUALITY preset on an Original Prusa MINI+. Bucket Segment Activate 'brim' and consider decreasing…
There are already working implementation of 'gt2 pulleys' available. Nonetheless that implementations are mostly based on SCAD which results in mesh files. If you prefer to model project parts directly in Fusion 360, this thing is for…
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
Download the Fusion 360 file and enter your custom dimensions (Modify, Change Parameters in the Design Workspace). I just recently got myself one of these neat electronically height-adjustable desks. With this purchase came the necessity…
I came across an idea about workflow optimizations in a YouTube video, which made me reflect on the mess that often accumulates around my 3D printers—purge lines, skirts, and the occasional failed first layer every few months. I tried…
I recently did some cable management on a RatRig V-Core 3 and found myself in search for a minimalistic solution to keep cables within common 3030 profiles. There were no models to my liking so I designed one. Consider exporting your own…
Preface I bought a Shop-Vac and Cyclone Dust separator a while ago; The Vacuum came with a 40mm hose, which is just not the best choice for a semi-static dust collector installation. I ordered a 60mm hose and had to solve the problem of…
This part addresses a very specific inconvenience I had with my Prusa Core ONE. From time to time, I drop purge lines or an aborted first layer below the bed. To clean those out, I usually slide them to the front, only to have them get…
Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…
Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…
This is modelled for the Festool MFT/3 contest and a re-desing of a circular waste bag holder that I published a month ago. I think the rectangular shape better suits the application at the workbench. My design consist of five parts, the…
This is a pre-exported version of my generic mounting bracket model . Compatibility: In the download section you will find models for the two power supply models that came with the Original Prusa MINI/MINI+ printers. DELTA ELECTRONICS…
I never used and didn't like the Eureka Mignon's hopper gate, so I removed it right away. Just to find out that the resulting hole is big enough to scatter ground coffee all over the place. This print fits snugly around the hoppers throat…
Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…
This model expands the existing colour options by allowing you to use any filament you have in storage, enabling you to fully customize your Elgato Stream Deck + to match your style and aesthetic preferences—all without paying 19.99€ +…
This model serves as a replacement for the original adapter. It is available in two variants: a faithful replica of the original design and an optimized version specifically tailored for printing. The optimized model accounts for reduced…
Neatly organize the individual cable strands that span between the back of your CM Qube 500 and a ( height adjustable) desk. Every single time when I found the endurance to finalize a fixed cable management solution for my setup, It…
PUKX 25 (/pʌks/) is a low-profile cable grommet designed for cables up to 6 mm in diameter. It installs in a 25 mm (roughly 1 inch) through-hole. The concept evolved from my Generic Studio Arm Mounting Grommet ,. This all-new design…
This is a camera cage and tripod adapter for the HIKMICRO Mini2Plus V2 thermal imaging camera module. The combination of a thoughtful design and a specific material choice results in a ¼-inch mounting solution that is both easy to print…
I purchased these markers some time ago; they came in a textile bag, to keep them bunched together and somewhat organized, provided you removed only one pen at a time. To remedy that I came up with this model, it requires a bit more space…
This is just a spring washer, but it solved a problem I had since installing the CORE One+ spool holder: I couldn't get a suitable O-Ring at my local hardware stores and a search on Printables came back with only TPU variants that…
The initial motivation to this model once was a desperate search, for a USB-C to USB-A cable in my box or various connectivity supplies. After that waste of many seconds, that felt like minutes, I came to the conclusion that I need order…
Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…
These blocks may appear as simple as a printable model gets. Designing them was unexpectedly meticulous; implementing automated mesh exports required additional technical effort; and in the end, the range of practical use cases turned out…
I implemented all these mods over a few days after deciding to gift my MK3S+ to my father for Christmas. Unlike my other designs, these modifications are one-offs rather than the product of a lengthy, iterative design and testing process.…
This is a reverse engineered variant of the INDX Tool Dock. The difference to the original is that it adds pockets for square nuts, so the screws thread into a metal nut instead of being driven directly into the plastic — The screws still…
The Locking Dovetail Connector (LDC) is a versatile dovetail mounting solution designed specifically for the Festool MFT/3 aluminium rails. It is adaptable to a wide range of accessories and features a robust locking mechanism that…
I just recently needed additional cable guiding capacity on some Elgato Master Mounts. I did all my cable management with KLIPPT so, it came natural to adapt the base plate to round things. Putting KLIPPT on a tube is not particularly…
Additionally Required Hardware M3 x 6 mm screws (ISO 4762, ISO 7380-1 or similar) 2x M3 hex nuts (DIN 934) 2x Adhesive tape (e.g. 3M VHB )¹ ¹ 3M VHB is only rated for up to 38°C (100°F) which could be a problem, depending on your…
Even if I didn't like the stubby design from the start on, over month of use I came to like the neat storage solution of the Sage/Breville stock tamper. Once I'd upgraded to a precision tamper base I had to model a handle to go with the…
This is a simple modification to get your IKEA Lack table on casters while keeping the overall aesthetics. The key to this design is finding the proper hardware. The wheels must be small enough to swivel around within a 22.5 mm radius. I…
I was looking for a way to attach a budget-friendly, generic microphone boom to my desk. Taking inspiration from the Rode PSA-1 , I designed this model. It includes a two-part hub that is secured in a 25 mm hole (which can be drilled…
This is as simple as it looks - A cap for the original DJI Osmo Action suction cup . It's a useful addition to keep dust and debris, that would otherwise scratch surfaces that you are mounting your camera to, from sticking to the silicone…
If you have an Elgato Prompter that you use with a DSL[RM] and have ever switched lenses or removed the camera to use it elsewhere, you know exactly why I created this model. I would've liked to store the Step Up Rings in the drawer where…
To wszystkie aktualnie dostępne wyniki.
