Liczymy pasujące modele…
This is a holder for the Honeycomb storage wall. Print settings: * 0.4 mm nozzle * 3 walls * 15% infill * 0.2 mm layer height * no supports needed Happy printing Change log: 06/22/2024: Added some Chamfers so inserting it into the hsw is…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
.stl and FreeCAD file.
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
It holds up to 8 tips.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I was a little annoyed, because it is really hard to get the inserts out of the HSW. So i designed these inserts. You can still use them as usual but there is also a thread so you can screw in different parts. I also added just the screw…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Can be used for all types of kitchenroll. Either print TopRod, MidRod and BaseFull or print TopRod, MidRod, BaseHollow and BaseLid if you want the base to be heavier. I just put in some screws i had laying around, but you have to glue it…
Wydruk około 9,43 €–11,53 € nettoWstępna wycena jednego wariantu
This is a cap holder originally made for HSW but I included stls for either sticking it to the wall with double sided tape or screwing it in. Printing: * 0,2mm layer height * 3 walls * 15% infill * no supports (only for the HSW one) I…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This headset holder can clip onto all tables with thickness of 34mm. A FreeCAD file is included, so you can change the thickness.
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Instructions: Print out the Box, the Lock and decide between the Lid with or without the measurement tool. For the hinges I used steel wire push rods but you can also just use some filament. Printing: Box.stl: 0,2mm Layer Height (for…
Wydruk około 10,33 €–12,62 € nettoWstępna wycena jednego wariantu
This is the SolderHolder. In order to use it, first you have to roll up the solder on the solder spool (as shown in the pictures). Then insert it into the case and pull the spool out (you might have to twist it a little if it is to…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
use washers to get a secure mount.
Wydruk około 6,08 €–7,43 € nettoWstępna wycena jednego wariantu
Update (05/06/2025): added TapeMeasureWinder-BodyV2.stl should be easier to get rid of the support material and assembly. added TapeMeasureWinder-RodWider.stl has a wider hole, for more types of tape measures. added…
This is a pretty big shelf for the honeycomb storage wall . I tested it with 3kg worth of filament and it holds easily. One downside is that it consumes about 200g filament. Print settings: * 0.4 mm nozzle * 3 walls * 15% infill * 0.2 mm…
These are just pretty basic knobs for many types of nuts. I would suggest you print both the loose and tight version, so you can figure out what fits your needs. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15%…
These are buckets for the honeycomb storage wall ( There is also a round version. ) Just print the bucket with the same size holder. Also the buckets snap in place with a satisfying click. BTW the render was my first in FreeCAD so dont…
This is a mount for the Speedybee TX800 on the Speedybee Mario 5 Frame. It might work for other VTXs and frames. It steps down 25mm x 25mm M2 to 20mm x 20mm M3. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 4 walls * 20%…
These are buckets for the honeycomb storage wall ( There is also a square version. ) Just print the bucket with the same size holder. BTW the render was my first in FreeCAD so dont judge me. My recommended print settings: * 0.4mm nozzle *…
A compact and lightweight print-in-place holder for the popular HexScraper (by visle) – made to fit the Honeycomb Storage Wall system. Perfect fit for the HexScraper ( Link ) Compatible with Honeycomb Storage Wall ( Link ) Print-in-place…
Hey guys, I just recieved my DJI O4 Air Unit Pro. Unfortunately Speedybee hasnt released 3D Printing files for a O4 Mount and you also cant buy a mount. So i designed this. Theres no support for the air intakes but the stack side plates…
This is a small drawer, perfect for organizing all your school stuff. There are two different variants. One is mountable under the desk and the other one is standalone so you can place it wherever. They come in different sizes (U stands…
This is a simple puzzle cube for kids. You need to print Part 1 4 times and lay them all on the side in your slicer. Also thanks alot to @CeesMeijer_7801 for designing the box. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3…
Hey guys, I just recieved my DJI O4 Air Unit Pro. I printed out the MARIO5-TPU-XT60_DJI_2 from Speedybee ( https://www.speedybee.com/mario-5-frame-download/ ) but the antennas were a little loose. So i designed these to give the antennas…
This is a remix of Data Holder Mk2 for the honeycomb storage wall . My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15% infill * no supports needed Happy printing!
A compact and functional storage box for standard (3"x3"/76mmx76mm) square sticky notes, combined with a reusable checklist stencil. Sticky Note Box: Keeps your notes neatly stored and always within reach. Checklist Stencil: Lets you draw…
This is a mini shelf for the honeycomb storage wall . Its size is 40mm x 40mm. You can perfectly fit a benchy on it. Also you can stack multiple next to each other. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15%…
This is a DJI goggles 3 holder for the honeycomb storage wall . Just line up the lenses with the lens covers and the adjustment knobs should be held by the dedicated holders. Also the goggle is upside down so no dust will get on the…
Great present for Easter! This sleek and minimalist jewelry storage system is designed to elegantly organize rings, bracelets, and earrings. The set consists of three different cone designs, each serving a specific purpose. The set…
This fully 3D-printable wall-mounted filament holder is designed for easy installation and customization. It consists of: Mounting Bar(40g): Screws into the wall and comes in three variations (left end, right end, and middle section)(two…
These are buckets for the honeycomb storage wall . ( There is also a square version ) Just print the bucket with the same size holder. BTW the render was my first in FreeCAD so dont judge me. My recommended print settings: * 0.4mm nozzle…
Hello fellow 3D Printing Nerds, so i had all these IKEA TROFAST boxes laying around and nowhere to store them. So i designed these rails. They fit boxes in size of 20x30x10 cm. You have to print either EndStop-Right and -Left or print the…
This is a AirPods Max Hanger for the honeycomb storage wall . My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15% infill * I used automatic tree supports (results may vary) Happy printing!
This remix adds a functional upgrade to the original Design Moon Lamp model by integrating a clean stand and internal mounting system for electronics. Designed for easy installation and clean cable management. Perfect for creating a…
This is a vertical mount for the Elegoo Neptune 4 display. It should fit all Neptune 4 models. You have to use M3 heated inserts otherwise it will not fit. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 4 walls * 15% infill *…
This is a businesscard holder for standard sized businesscards (55mm x 85mm). You can just push the top part into the bottom part. No filament hinges needed. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15% infill…
A sleek and practical over-the-door hook, designed to fit doors of various thicknesses. Available in 6 sizes: 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm Designed for jackets, bags, towels, and more No screws or tools required – simply slide…
A spacious two-compartment box designed to fit the Honeycomb Storage Wall system perfectly. Ideal for sorting and organizing letters , pens , and other small desk essentials. One compartment fits standard letters and envelopes The other…
Hey guys, just desgined this for my girlfriend. There are two different versions of the EarringBoxBottom. One of them has a small hole that is going through, so you can attach the earrings to it. The other one has a hole that is not going…
This is a physical volume mixer based on a github project: https://github.com/omriharel/deej. I used these potentiometers and an arduino nano. To keep the Arduino Nano in place I used some steel wire push rods. If anyone needs it I could…
Zip bag holders for the honeycomb storage wall . These are not suited fot heavy, large bags. But they're doing better with heavy, small bags. BTW I'm just starting out 3d rendering in FreeCAD so dont judge my render. My print settings: *…
A clean and minimalistic holder for 76×76 mm / 3×3" sticky notes , designed to attach directly to the Honeycomb Storage Wall system. Great for quick notes, task lists, or reminders right next to your tools. Compatible with standard sticky…
A custom-fit holder for the Fanttik E1 Max precision electric screwdriver , designed to mount directly onto the Honeycomb Storage Wall (HSW) system. Precisely shaped for the Fanttik E1 Max Fully compatible with Honeycomb Storage Wall…
The picture was of another version, which didnt quiet fit. Thats why theres an angle. The file uploaded should put the LGC almost parallel to the wall. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 4 walls * 25% infill *…
Needed a holder for many businesscards. I can't say exactly how many it holds but the storage area is 10.8cm/4.2" high. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15% infill * no supports needed Happy printing!
This is a small puzzle for kids I created. You have to print Part 2 4 times. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15% infill * no supports needed Happy printing!
Designed this, cause i needed a stand for my businesscards. It holds about 16 businesscards. If you need a box for your businesscards check out my other 3D models. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15%…
A compact and secure mount for the Logitech C270 webcam , designed to attach directly to 2020 or 2040 aluminum extrusion profiles . Perfect for mounting your webcam to 3D printers, CNC machines, or custom frames. Supports both 2020 and…
A custom-fit holder designed to mount the Fanttik F2 Master mini rotary tool directly onto the Honeycomb Storage Wall (HSW) system. Perfectly holds the Fanttik F2 Master rotary tool Snaps into place on Honeycomb Storage Wall panels Keeps…
To wszystkie aktualnie dostępne wyniki.
