Liczymy pasujące modele…
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation. I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase…
I bought the Hiletgo PWM speed controller to change the speed of a 12 volt fan, but it does not include an enclosure box. It was only a bare PCB Board. This model will house the PWM controller using four pegs that will fit through the…
Big Tree Tech USB-C ADXL345 Accelerometer Side Mount for Creality Sprite Extruders. Mounts using a single M3 countersunk screw. Uses a thin profile that should fit in with your other Sprite hotend modifications installed. The mounting…
Very slight modification to the original broadhead wrench. Added chamfers so the wrench can be printed front side down. This model may be easier to print in this orientation for certain printers. I believe the original model was meant to…
Print with a brim (inner / inside brim only). Supports are optional, if you prefer to use them.
Holds a 27mm diameter / 25 gram glue stick to any point using a counter sunk screw. Use M3 screw with T Nut to mount to printer, or use counter sunk wood screws. Recommended print material: PETG Print settings: 3 perimeter walls, 4 bottom…
Rail measures 14.4mm across (I believe this is the deep rail - need to double check) Modular Pi case rail that attaches by machine screw and T nut underneath a printer. This is useful for the Ender 3 S1 / S1 pro series of printers that…
Added the ability to grab the broadhead base by the bottom by using thumb and index finger, or by using pliers or other tools. You can also push the base down through two holes in the lid. The original creator mentioned a possible issue…
Magnetically attach either a KUSBA USB-C or BigTreeTech USB-C ADXL345 accelerometer to your bed slinger using eight 10mm neodymium magnets. Push magnets in using the back end of a sharpie marker. The magnets can help you store the device…
Holds a 30mm diameter / 40 gram glue stick to any point using a counter sunk screw. Use either a countersunk M3 machine screw with a T Nut to mount it to a printer rail, or use a counter sunk wood screw to a wall. I was able to mount this…
After modifying my CR10-SE with a klipper variant (Destinal's Image), the touch screen should not be used. A cover is recommended to prevent accidental touch screen input. Slightly modified to stay on the screen securely using friction to…
Mount an Anker USB Charger under your desk with a 25 gram two piece bracket. Supports Model A2063 PowerPort+6 QC 3.0 USB. Uses 25 grams and about 1 hour of print time (PETG). Rounded fillet corner design prevents charger from sliding out…
Block glare for security cameras that are blinded by street lights or sunlight during the day, and even block IR lighting emitting from other cameras. Could also be used to block irrelevant areas of the camera view that trigger too much…
Coupler adapter to join two microphone mount adapters to get more adjustable angles for your microphone. This part came with my mic arm but it broke, so I re-created a replacement part. Recommended print settings: 100 perimeter walls, 100…
Tired of your Soda being stolen from the company fridge? Then hide your favorite beverages under your desk away from your nosey colleagues by using this stealth C-Clamp mount to hold a 12 ounce soda can beverage under your desk! Print two…
Remix of the original CR10-SE Friction Fit screen cover with an opening to view the temperature and access part cooling controls. Cover stays on the screen securely using a friction fit. That way you won't accidentally knock the cover off…
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
Use this to mount your electric vacuum seal bag pump for storing your filament as dry as possible - Directly to your IKEA Skadis board! Or hold any round object that's ~50mm in diameter. Store your filament as dry as possible for school…
Logitech C270 bare camera mount for the X tensioner end for the Ender 3 S1 / S1 pro printers. You must remove the bare camera PCB board from the Logitech C270 housing and use original screws to install it in this printed model. This print…
IKEA Skadis Glue Stick holder for 30mm / 40 gram glue sticks. Can also hold prescription bottles for the storage of miscellaneous items or medication. Never lose your glue stick for school projects and keep your important medication…
10mm socket Wrench for LiFePO4 battery terminals. Non conductive and small hand grip design to prevent over torque / over tightening of the 10mm bolts. Safer than using a metal 10mm wrench, which may accidentally make contact with other…
Recommended Print Material: PETG Print settings: 100% infill. This is a small print. Clips on the back side of a FLIR TAU2 lens holder to protect the inside from dust while in storage.
Filament Vacuum seal bag pump holding clamp for USB rechargeable pumps (50mm in diameter) Use this clamp to wall mount your electric vacuum seal bag pumps for storing your filament as dry as possible. Use Counter sunk wood or machine…
Insert a small C-clip washer under your Caliper's thumb screw to remove the cheap "wobble" from low end budget calipers. Make yours feel like a Mitutoyo caliper! Just remove the thumbscrew wheel and attach the c-clip washer on the…
To wszystkie aktualnie dostępne wyniki.
