Liczymy pasujące modele…
Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Was going for a more striking yet stylish model to show off what can be done with a 3d printer. Designed for 0.3mm layer height, as the strings are 0.4mmx0.3mm. Probably won't scale well, but might be possible. Just need to watch the…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
The clip goes inside the shirt, and is loose enough to not wreck the material, but snug enough to stay in place while moving around. Edit text in Fusion 360 or Step. The blank tag has the top ironed in the gcode file, so it can be written…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Uses that last 1 meter of filament, 20-30 minutes to print. Colour change in just above 1mm to have the text stand out.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
So this is a gimbaled to-go coffee cup holder. Fully 3d printed, assembly is just spin the bolt in. Designed to clamp a bar 20-30mm in diameter, as well as flatter things, like dashboards, etc. The diameter should fit a large double…
Wanted to make this for a while, was interesting to work though the problems of packing moveable yet stable joints into a small space. The TPU wraps add force to the conical pins the joints rotate on. Attempts were made to minimize…
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
Prints well at 0.1-0.2mm, no supports required. Make sure the rotor is free from elephant-footing and can spin freely. A small dot of oil on the center shaft will help it run smoothly. Quite loud and responsive, actually.
No support required, recommend 0.15mm layers or less. Maybe slide the horizontal stab all the way through the holes one sides at a time to make sure it fits. Put heavy things in the inside hidden square holes, nuts&bolts, metal, etc to…
Normal settings, two options for printing - as one piece (I used tree supports, ironically…or unironically, idk…), or split in two for maybe easier printing to glue together after. The one pictured printed well asone piece at 0.2mm,…
Printed in TPU, but might be ok (for a while?) in less flexible filament. Printed here with a 0.3mm nozzle @ 0.15mm layers, . Others I have printed have worked well with a 0.4mm nozzle. 21.5mm inside, 9mm tall, wall thickness 2.1mm.…
Recommend full support, low layer height, half speed, and 1mm or Z-hop, as the long, lain-out profile may cause problems otherwise. Pic of Slicer 2.6 Alpha with Organic support, spoon at 45°, though I haven't tried this myself yet.…
Layer height form 0.1-0.2mm work fine. Do not add support. There are two small supports already there under the double-conical rotor for support as it's printing, just remove those after. After printing gently-ish work the rotor around,…
Was talking to Leblond and just made a few remix tweaks on their original model. The intent was to keep the same lines as the original, but have a bit more space behind the ‘tab’ part, so your finger can fit in there without rubbing on…
Managed to get this to work, which was cool. Main and tail rotor gearlinked, 1:2 ratio. Print in whatever, this one in PETG. A 608 bearing would be desirable for the pedestal, the other 4 could be 608s, but I used the printed…
I got the idea form Kijai , and the Moon City, https://www.printables.com/model/218224-moon-city-20. Used, Zivbot's Castle Generator https://www.thingiverse.com/thing:1682427 to build elements of the cityscapes and worked them in, bogging…
Fortunately there is just over 10mm of space in front of the LEDs on the hotend, more than enough space to slide in something to add a bit of colour. Printed with settings leaning towards this , though not as critical to get it all the…
I wanted to recreate this since I saw it a while back - a WWII pilot trainer , you sat in the chair had to control the stick to get the ball to the middle and balanced there. I also wanted to attempt using raw filament as actuator cables…
This fan fits the Noctua A12x25 metal hub. The Redux has an updated hub and wingtip, but retains the original blade profile. This fan, https://www.printables.com/model/299994-xj99c-noctua-nf-a12x25-mod is probably a better design,…
Replacement blades, in the style of the T33. I'm not sure about the size of the hub at all.
Replacement blades, in the style of the T33.
From Appa1990's (https://www.printables.com/social/278703-appa1990/about) file grab, either here or on Thingiverse. Should scale up fine, smaller will get trickier. It will need supports. Dot of glue for the rudder. Printed here in PLA,…
Print in TPU or other flexible. No supports required, 0.2mm layers or whatever you like. A knot might fit but designed for a flare-melted end on the paracord.
Whatever filament should work fine, as there is no real heat issue, but use 0.1mm layers so the curves are smooth. The 5015 intake will slide and stay on the bolt heads. The tail cone will need to be glued(dot of super-glue) onto the back…
The Base and Star will print without support, any settings. The tree will need minor supports in a couple areas, recommend 0.1-0.15mm layer height to keep the detail alive. Use 2x10mm long raw filament pieces as alignment pins to…
This is the same spider from my filament guide, https://www.thingiverse.com/thing:2829156 just in a different pose and without the hole for the filament line. Print Settings Printer: FLSUN Prusa i3 Rafts: Yes Supports: Yes Resolution:…
A classic style model for an iconic character, possibly the world's first Bobblehead Bender! Uses 3d Printy's double weight spring and a modified base also, https://www.printables.com/model/282561-parametric-bobblehead-springs Thanks! The…
Wanted to make an easy print-in-place , no support friction lock for drawstrings on bags, shorts, etc that would fit 4mm paracord. A few itterations lead me to this. It was a bit of a challenge to keep the size small but still have a good…
This is a tool for https://www.printables.com/model/3719-collapsing-katana-print-in-place I needed a little help popping this print loose, so this is held under the blade, while you give it a whack on a hard surface.
210mm total width. Updated with more useable base legs. Pic is my best shot at it.
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side). Added a hole to put bolts in for weight…
Mods for this awesome model, a single print parasol, and a layered body so you can layer change to get colours. Not exactly plug and play, you will need some pieces from the origin models or make your own and you will need to modify the…
This is PETG, but PLA should be great as well, use stiffer filament for the bolts. TPU for the straps, or if you don't do TPU, rubber bands, Velcro straps, etc. Designed to fit a Samsung with a case, but should adjust to fit most newer…
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
A fairly simple one and one a bit more stylized. Should be easy prints, here at 0.2mm layers in Polyterra peanut PLA. Just small supports under some overhangs in places will help. .step/.f3d files attached.
This is modeled after SuFu's idea, https://www.thingiverse.com/thing:952737 but is one piece and fully 3d printed. Set your first layer to 0.1mm thick(mesh bed levelling is a big help at this layer height), 105-110% of your normal first…
Used the parametric Fusion 360 file from TheSameNameTwice, 80 x 160 x 25mm inside. Tweaked a couple chamfers for ease of use, as this box is so shallow, it flexes a bit less. Updated: With a gasket that actually fits, should be made out…
This bracelet is a derivative of a Trailblazer Weave ( https://www.youtube.com/watch?v=-26a5M9umeU) with the center cord replaced with these, but they could be used for whatever. DM if you are looking for specific guidance, but I figured…
Not much modded really just made the sides 202mm x 3mm inside, added a bit of chamfer around the outside. PLA-CF, 0.2mm, no support.
Should work with whatever your favorite settings and filament is/are.
Probably get away with any filament, but TPU adds durability. 0.2mm layers, no supports.
A small keychain tool to blow through and focus air on your campfire to get it going - or maybe to keep that troublesome print from curling in that one spot. Maybe a cosplay collapsible wand. A novel fidget also, I guess. Either way, it…
Just to see if there was any more performance to be had. From the stock blades; +1° AoA at the tips, +4° AoA at the root, +25mm chord at the tips, added dihedral curve, and some winglets. Blades printed standing vertically, will need some…
A strap for holding whatever you need, just adjust and tighten the bolt. Will hold a fair amount of force, but the ability to set it at any diameter is it's best feature, maybe for holding things while gluing, etc. Strap printed in…
A dice tower to store 5 or more 16mm dice and let one go at a time with each back and forth of the slider, designed for Camel-Up, but who knows where this will be useful! Now there's Camels too!…
Wanted to see if it could be done. Looks like it can. A few iterations, vase mode was not reliable enough when printing, given the shape so this is a normal print, 0.2mm layers, two perimeters, 0.6mm width on a 0.4mm nozzle, 1.06%…
No introductions required… :-) (In the pic, Gradient in TPU, 0.2mm, 60mm/s on a heavily modified A10M)
Just a little holder for M4 nuts in aluminum extrusion. Set at a 45° to allow a secure hold.
Not the most gentle enviroment for a 3d print, so I needed to think about sun exposure, rain, roadsalt, g-forces, stone chips, etc in the design and filament, but the outside needed to look perfectly like the others, as you'd see two of…
This model https://www.printables.com/model/136844-herringbone-geared-turntable-roller-bearing is an absolutely beautiful and functional self centering thrust bearing design. It looks good just sitting there, but I wanted to make a…
A cover for a 2" trailer hitch that is also a place to hide the spare keys. The 'X' in my case is for Jeep XJ, but it could be for whatever you like - X-Men, Xavier, Xtreme...you get the idea. You may need to confirm that the cross-bar…
Some Prusa spools might be a bit too wide, especially for multicolour printing, but others have had good success with stock spools. If you are running into clearance issues, or just want to load refills onto Prusa spools, these take the…
Saw this type of double pendulum on IMGUR or somewhere, recreated the idea here. Giving the bar a spin or holding the bar to the side and giving the ring a spin seem to be the common ways to start. Uses two 608 bearings but you can add…
.Step & .f3d files included.
Really like Leander's model, tweaked one of my fans to work in it. Showed a peak of 4m/s (1000ft/min) flow with it clamped down, and some silly amount of cranking. Decided to bypass the rachet mechanism, so it's mounted direct to the…
I borrowed a limb from laserjon 's fractal tree(which is a really cool model) to bend and rework into the mesh for this dish. (Not easy to work with in Fusion, as the computations for working with geometry that complex are taxing on the…
Took a bit to get the effect looking right, inspired by by https://en.wikipedia.org/wiki/Fontana_della_Pigna and some other pinecone statuaries. A bit of support required, but I didn't like the look with a thicker base. Printed here in…
Print, find a good place in the middle, mark and cut a few hexagons out to fit. Glue it with superglue.
Surprisingly strong illusion here, where the human mind wants to see faces like they're supposed to be, not as a concave ‘face shaped hole’. Hard to believe this is inset and not jumping out of the print.…
Something to decorate an office or your technical cave of choice. Makes a great Christmas gift for that aviation enthusiast in your life. Print with dark colour first, then switch above 2mm to white or other light colour. 250x146x2mm but…
Great game to play, lots of room for improvement of the pieces, so that's fun too. Did the dice tower pyramid a while back, brought it over here, https://www.printables.com/model/97395-dice-tower-pyramid-for-camel-up-board-game , now it's…
Fairly straightforward print. Designed with 0.6mm nozzle, 0.2mm layer height, but probably anything will work. (Pic is my 1920x1080 wallpaper now too)
Tapered inside for easier dough removal, but still might need a little push-through the handle-hole to come out in one piece depending on the dough. Whatever print settings/filament should be fine. .f3d/.step attached for mods.
Straight forward holder. Holes are 0.5mm larger diameter than the bit, for ease of use. Couple tweaks around the hinges and clip on the box, dividers to keep bits in place inside. 0.2mm, no supports.
140 x 84 x 3mm, but scale to your needs. Would need to print a lot slower to get better transparency, but it can be done. printed here at 0.2mm layers, PLA but the river is actually PETG.
Perfect gift for that Aliens move fan in your life(Aliens:Romulus coming in August!), these are the symbols used in the ships and buildings in the Aliens Universe. https://alienanthology.fandom.com/wiki/Semiotic_Standard Used an .svg of…
If you're here, you know why. Step and f3d files attached for the inevitable mods you'll need to do for your situation. This whole carriage weighs 900g, but it hasn't had too much negative effect, and is a trade-off for a functional…
A basic copy of the ones that are on this Singer Serger. TPU, 0.2mm, no support. Might be OK in PLA, etc if you moulded it to your cone using just not boiling hot water.
Christmas Tree Coaster! Got a drink? Put this under it! 90mm X 4mm. Top infill printed concentric, to get the nice 'boughs' look. Print Settings Printer: FULSUN i3 clone(modified) Rafts: No Supports: No Resolution: 0.2 Infill: 20% stars…
Print all the Cryptids! 200mmx200mm 0.2mm first layer, 0.1mm layers after, 100% rectilinear infill. Colour layers: Dark blue 0 - 0.8mm Dark Purple(start at) 0.9mm Dark Grey 1.0mm Orange 1.7mm Yellow 2.2mm White 2.7mm -3.0mm Uses this…
Have seen a couple ceramic statues simmilar to this around, thought to make one for printing. A bit chonky maybe, but loveable enough. Will scale well to almost any size, no supports required, normal print settings should be fine. Used…
Was trying to get a low tone from this horn, stumbled across 528Hz as something of a "soothing, mystical, etc, etc" frequency. https://www.calm.com/blog/528-hz So far, I've only anoyed everyone in my house... Straightforward print, PLA…
Printed in PETG, 0.2mm layers, no supports. Zip-tie or similar to hold in place. Here i used the head of a second zip-tie as a ‘zip-nut’ on the 'zip-tie bolt'. 1.75mm dimeter holes. .Step file attached for mods.
King Domino is an awesome game, but the box holding the cards takes up too much precious table real estate. If you like, after printing, cut and duct tape the original box so the new one fits in the place of the old card holder side.…
Straightforward print. Sized for a name tag, baggage tag, etc.
Done with https://itslitho.com/ Not much changed from the default settings other than the size and the pixel density. Printed here @0.12mm layers. Original picture attached as well as one with the decals(somewhat roughly) removed.
Chaotic motion from double pendulums, https://en.wikipedia.org/wiki/Double_pendulum , why not add some chaos to the print? 5mm magnet, .step file attached for mods. Was an axe, but is now a pendulum, probably from seeing this one,…
Someting to check your bed manually using a dial gage with a tab on the back like this one on amazon . It is designed to work at 25mm only, so autolevel, then move to 25mm. Power off and move print head as close to the bed adjustment…
Kind of a silly little print, but I end up using it all the time, and see it every day. Use up those end of spool bits of filament. Standard print settings, no support required.
Want to express your Mastodon? Easy-print tags! A few different files (I seem to be without the correct shade of blue) .Step/.f3d files to mod and create as you desire. Designed around 0.2mm layers. Do a colour change at the right layer…
Too long we've been delayed in satisfying our desires for culinary delicacies by fighting to get the box open, but no more! Print it out, any filament, 4+ perimeters for strength maybe(I used 5). A bit of support(tree or traditional)…
Symbols from the Aliens Universe, https://alienanthology.fandom.com/wiki/Semiotic_Standard Maybe a bit of licence taken, making up a 3D printing Semiotic symbol, but who's to say what will happen in 2078? 50x150mm Made to print with layer…
Other needed parts here, https://www.printables.com/model/258117-wind-tunnel-desk-fan-fan-v5-pc-120mm Normalish print settings, supports needed here and there. Print the wing, shaft and block as light as possible, one perimiter, no…
A quick print to allow a 120mm fan to clip/hang off the partially open door. Normal print settings. .Step file for mods.
To wszystkie aktualnie dostępne wyniki.
