P
PrintablesBig B
Silicone/Glue/Acrylic cartridge cap
Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.
- Pobrania
- 1321
- Polubienia
- 329
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesBig B
3KG Industrial Paper Towel Holder
Update 2025-07-26: Added a sturdier version featuring support beams for improved rigidity. This design is inspired by reinforcement techniques I used on a spool holder that previously flexed under load. Tip: Print both support beams…
- Pobrania
- 1114
- Polubienia
- 373
- Ocena
- 4,67
P
PrintablesBig B
Pot Lid Organizer
I designed this for the largest lid first, then made lower-profile versions for smaller ones. It should fit most round lids or similar items. You may need some foam tape if there’s any looseness—only one of my flatter lids needed it,…
- Pobrania
- 953
- Polubienia
- 612
- Ocena
- 5
P
PrintablesBig B
G sensor bracket for ender 3 v3 ke
2024-06-29 Made the model a little thicker. Print with normal auto supports on build plate only. Other settings at default. I made it so I could keep it on all the time. With original bracket the belt is very close and is uncomfortable to…
- Pobrania
- 653
- Polubienia
- 27
- Ocena
- 5
P
PrintablesBig B
Pen holder with egyptian hieroglyphs
Printed with petg 20% infill 0.2 layer height No support Size: 63x63x80mm
- Pobrania
- 164
- Polubienia
- 34
- Ocena
- 5
P
PrintablesBig B
Creality K1 Max top lid riser
2025/07/29 Update: Added a small channel for cable management. I used Velcro and super glued it to the back panel. 2025/03/27 Update: Added vented front middle part. Added new lid support arm to fit vented front. This is the 2nd gen of my…
- Pobrania
- 152
- Polubienia
- 22
- Ocena
- 0
P
PrintablesBig B
UPDATED! Inhale the good sh*t... ashtray
UPDATE 2026-10-10 : Added a top lid with secret stash. 0.2 layer height. 5walls. Fuzzy skin for the pot leaf. I increased the thickness of walls by 1.25mm after I printed it, so your result should look better. Also my petg needed more…
- Pobrania
- 148
- Polubienia
- 19
- Ocena
- 5
P
PrintablesBig B
Sliding Bolt Latch
Everything fits nicely. The pin is threaded. I also added some spacers in different thicknesses. I'm gonna install this lock in my balcony. Prints without supports. 6 walls. 0.2mm layer h. 30% infill. Recommended to print the pin…
- Pobrania
- 136
- Polubienia
- 36
- Ocena
- 5
P
PrintablesBig B
TPU rugged Samsung TV remote case
Updated side grip. Anyone who owns this remote knows how small and easy to misplace it is—and how uncomfortable it can be to use. I printed this version in white to make it much easier to spot, and added a textured pattern on both sides…
- Pobrania
- 134
- Polubienia
- 21
- Ocena
- 4
P
PrintablesBig B
Things: Cannabis edition
No special instructions needed. I printed everything at 0.2mm layer height, 15% infill, 2walls (ashtray 4 walls). Hilbert curve top layer pattern. Recommended to change colors mid print for coasters and ashtray.
- Pobrania
- 131
- Polubienia
- 15
- Ocena
- 0
P
PrintablesBig B
Creality K1 max raceway covers
Thicker and deeper walls compared to original. I printed it on the build plate with carbon fiber pattern. If you can't print the long cover in one piece, just split it in half in your slicer. Printed in ABS. If you print with closed…
- Pobrania
- 119
- Polubienia
- 21
- Ocena
- 5
P
PrintablesBig B
Raised nebula pad bracket for ender 3 v3 ke
Ever since i've got the printer I wanted to adjust the angle and height of the screen. With this bracket the position is perfect for me. Maybe it will be for you too :) 0.25mm layers seam: back 4 walls 25% infill normal auto supports…
- Pobrania
- 116
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBig B
Desk sign holder + blank plate
Desk sign holder printing: 0.3mm layer height 6 walls 10-20% infill 3-4 top/bottom layers Add some manual supports on the front lip and paint red everywhere else where your slicer tries to add supports. Insert plate printing: 0.3mm layer…
- Pobrania
- 115
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBig B
G sensor bed bracket for ender 3 v3 ke
Default settings no supports
- Pobrania
- 114
- Polubienia
- 8
- Ocena
- 5
P
PrintablesBig B
K1 Max side fan cover
Slimmer version compared to similar models. Attaches to the fan with regular PC fan screws. I used 1mm double sided tape as a gasket. Printing: PETG 0.2 layer height. 3 walls. 30% infill. Top/Bottom pattern: concentric. Can enable “make…
- Pobrania
- 101
- Polubienia
- 10
- Ocena
- 5
P
PrintablesBig B
Raised feet for Sovol SH02
I increased model thickness after I printed it. Just put the dryer on to the riser and that's it. I didn't want to unscrew anything from the bottom or modify in any other way so it does not attach to dryer. (snaps on so it holds a little.…
- Pobrania
- 97
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBig B
Dual PTFE tube guide V3 for Ender 3 V3 KE
Printing instructions: 0.2 layer h 4 walls top surface pattern : hilbert curve normal auto supports supports on build plate only : yes 10% cubic infill Seam position : back You can stop the print to change the filament for the logo. Look…
- Pobrania
- 93
- Polubienia
- 18
- Ocena
- 0
P
PrintablesBig B
Creality K1 MAX motor mounts and tensioners upgrade
CONSIDER THIS A WORK IN PROGRESS, BUT THERE WILL BE NO UPDATES FOR THIS MODEL IN THE FUTURE. FITS K1MAX ONLY. I recommend to upgrade only if you will be able to return back to stock just in case. I destroyed stock XY joints because of the…
- Pobrania
- 92
- Polubienia
- 25
- Ocena
- 0
P
PrintablesBig B
Slug and snail beer trap
Base part is ~70mm deep, ~55mm wide. Screw on cap, nothing fancy. Not to big. Holes are 18mm. Easy print. After one day I received pictures and someone was having a party already ;d Printed with PETG Regular settings just print with more…
- Pobrania
- 87
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBig B
Big feet for Ender 3 v3 KE (UPDATED VERSION)
UPDATED VERSION !!!! if you downloaded my model before 2024-05-11, I would suggest to download this updated version . First version was made in free cad. Now I'm trying fusion 360. I don't have a picture of the updated back feet because…
- Pobrania
- 82
- Polubienia
- 25
- Ocena
- 0
P
PrintablesBig B
Creality K1 MAX spring tension plate with TPU pads
Update 2025-05-25 : Added no logo version. Relieves unnecessary spring pressure from the bearing. Improves resonance graph on the X axis. Simple drop-in mod with no permanent changes. Change thickness of the TPU pads until you get best…
- Pobrania
- 78
- Polubienia
- 18
- Ocena
- 0
P
PrintablesBig B
Sovol SH02 coupler with PC04-M10 pneumatic fitting
EDIT/UPDATE: one PETG coupler broke after couple of months so I decided to print one in TPU and it works even better (I will update if TPU will not be able to handle the heat). So recommended filament for this project is TPU. I printed…
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBig B
Dual PTFE tube guide for ender 3 V3 KE
I was using youtubers embrace making tube guide almost since I got the printer, that's where the inspiration came from. Recently started to print more in two colors and single tube became a pain. So I redesigned the tunnels because they…
- Pobrania
- 62
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBig B
(Final Update)Ender 3 v3 KE silent idle fan mod
Final update 2024-11-01: I will leave all my previous posts because there might be some useful info to someone (product links etc…). To control one fan is nice, but then the other fan ruins everything. So my advice is either do it for…
- Pobrania
- 47
- Polubienia
- 23
- Ocena
- 0
P
PrintablesBig B
(Updated) Another jar for chemical and biological samples...
Update: added new “PillBot” lid. Fixed the pattern a little bit and added more jars of various depth. This container has no sharp corners inside so nothing will get stuck there(last photo). Everything printed really well with PLA. There…
- Pobrania
- 44
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBig B
Philosopher’s Stone Symbol keychain
Philosopher’s Stone Symbol keychain
- Pobrania
- 38
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBig B
XL4016 case
2025-06-24 UPDATE: Top lid should hold in place by itself now. I haven't printed updated version, but everything should be fine. Printed with PETG 0.16 layers 2 walls 20%infill Print with front face on the bed without supports. Buck…
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBig B
Garden sign + 20 vegetable plates
I haven't printed any of the plates with English names, but there should be no problems. Enable normal auto supports for the sign. After printing they were fairly easy to remove. No supports for the plates. I printed out of PLA. 2 walls.…
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBig B
Screw on funnel for 500g silica bead container
Printed with PLA. 0.2mm layer. 3 walls. 4 Top/Bottom layers. Top/Bottom surface pattern: concentric. Staggered inner seams: on. Scarf joint seam: contour and hole. Scarf joint for inner walls: on. Role base wipe speed: on. Wipe on loops:…
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBig B
Flower of life pen holder
Printed with PETG. (you can use any other filament)0.30mm layer height.(your choice) 15% cubic infill. No supports. You can scale the size of the pen holder in your slicer.
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBig B
Measuring and cutting assistant
No special printing instructions. My colleague at work damaged his main finger so I made this simple tool and it proved itself to be very handy in some situations. Ofc using finger only is much faster. Smaller and bigger versions available.
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBig B
Sovol SH02 filament dryer fan swap
UPDATE!!! Improved the design. Prints without supports now. Reoriented the model for easy printing. Aligned all holes. Chamfered the air intake and reinforced the model. The fan sits a lot better inside the bracket now. IMPORTANT: To…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 5
P
PrintablesBig B
Filament drybox
I don't expect anyone to make the same box as I did, but maybe it will give some ideas working on your own project. I've bought a 30 litre box and it was not rigid at all, but it was cheap for its size and had two "handles". So I made a…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBig B
Ultimate Creality K1max Mainboard fan upgrade
IMPORTANT: Some people may encounter fan errors after upgrading the fan, so I recommend keeping the stock fan in case you need to revert back to it. Personally, I control my printer via Fluidd and have only encountered the error once…
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBig B
Brackets for various purposes
The pin weighs only 3.5 grams. Others from 9 to 16 grams. Made the voronoi pattern to save some filament. Print with more walls than usual (I used 3 @ 0.2 layer height). Cubic Infil 30%. Each model has 2 screw holes.
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBig B
Ladder socks (TPU)
0.3 layer h. 3 walls. 25% cubic infill. 5 tops n bottoms bottom pattern hilber curve. normal auto supports on build palte only. Printed in sunlu TPU 95A. I left 2 screw holes, but didn't need to use it, holds up just fine without screws.
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBig B
Zalman S3 TG PC case custom panel
If you're like me and after you installed an AIO to this small ATX case you lost front USB because the radiator needs space to fit. That's no problem, but the empty holes was not pleasant to look at so I made a custom panel with custom…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBig B
A Serious Spool Holder
Probably this spool holder is not for everyone, but I wanted it to be wall to wall in the dry box. I'm making it for 4 spools so it can be printed and connected for as many spools as needed. It can be lifted with one hand while with 1kg…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBig B
Circle marking tool
For assembly look at first picture. Just a simple tool to mark 110/135/170/210/260 mm circles for 100/125/160/200/250 ventilation pipes. Need 1 608zz bearing. I changed the design of numbers after I printed so maybe you will be able to…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBig B
Keyboard tray rail brackets
This heavy-duty bracket is perfect for making bigger keyboard tray that has also plenty of space for mouse movement. Furniture board that I used is 86cm x 30cm x 2cm. Whole assembly feels very sturdy. The idea was to only print it once.…
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBig B
Incense Ash can
Simply tilt the wooden incense holder together with this holder to one side or the other, and the ashes will fall through one of the openings into the container. When the container fills up, open the back door and conveniently empty all…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBig B
Doorbell roof for kinetic GB157 or Tecknet bells
Max bell size ~ 104mm x 47.5mm. Max thickness ~ 25mm. Mounts to the wall with printed plate and screws, then just slide the housing on. Use double sided tape for the bell itself. My print settings: Printer K1max. Filament: PETG Layer…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBig B
4S1P High Power (weldless/experimental)
!!!IMPORTANT!!! Battery pack is one of its kind and completely experimental. Do this at you own risk!!! Wouldn't recommend building it as a first pack. Never leave live wires unprotected. Protect them before final assembly of the pack.…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.