Liczymy pasujące modele…
Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…
Uploaded Version 2_3! I've made the hinges much beefier & added locking indents on the hinge so it will snap close & open! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fits standard 6.35mm or…
An exact copy of the gcode simulation (minus some text) as a parametric & solid
Edit: 2024-09-20 I've merged & reworked the model to fix a bunch of issues & made it a lot easier to actually print. Download & print the "plaguedoctor2024.stl" file Really old notes below this line:…
The new version is slightly more slim, doesn't throw beams of light to the sides, & the design file is a lot tidier. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following…
Edit: Just a heads up, I recommend using supports like this when printing this: I also recommend printing this with big thick lines to speed up the print. This really isn't something that needs super fine detail in order to work. Might as…
I made this model based on a set of what I consider to be good sai for karate so that I'd have the measurements/proportions to commission a set from a welder. That said, I went ahead & printed a set because why not. The printed sai should…
I've also uploaded the design file for anyone who wants to modify it.
This is a lithopane holder lamp. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following settings: Height: 125 Angle: 90 Maximum Thickness: 3.2 &Make sure you upload a 4:3 aspect…
I've edited Triple G Workshop's design so the shelf prints flat in multiple pieces. Should print faster & be a lot stronger in this orientation. I also added keyhole mounts on the back. There's a STEP file so others can have an easier…
Slicers are getting more fancy with things like Arachne perimeter generation. Printing thinner extrusion lines is a lot easier now. Since I couldn't find a model like this that tested thinner extrusions than .5mm, I made my own. It's…
Edit_5 09-15-2019 I've added a STEP file for all of the boxes. That should make altering them much easier. Description: I didn't like any of the boxes for JAWong's Setters tiles so I made my own. This is setup for a 3-4 player set but you…
Print List: Planter_Base ---------------------Print: 1 Planter_Cells ---------------------Print: 1 Planter_Roof ---------------------Print: 1 Planter_Wall '---------------------Print: 4 Planter_Clip_Vertical '-----------Print: 8…
This is a door latch that's part of my Ender 5 heated enclosure conversion. It was a 20 minute print using my print settings. The cutouts are for M4 screws. Edit_07-22-19: Added an optional interior stop for the door --makes it easier to…
Just a 20x20x20 calibration cube https://imgur.com/a/ZSIFSoG Category: 3D Printing Tests
This is a minimalist mockup made from my TL V6 Volcano hotend. Category: 3D Printer Extruders
This is a remix of Nitec0re's ducted 5015 blower stepper driver cooler that's made to use a 30mm or 40mm fan. This thing prints in two parts & snaps together. The fan mount section contains fins to rectify the airflow coming from the…
First off: Don't Be Stupid. These are for practice only and will likely shatter if they were to actually ever hit anything. You absolutely must validate the strength of your prints! If you don't know how to safely inspect/test nunchaku…
I couldn't find one on thingiverse so I made one myself using measurements from a razorblade on hand. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker…
Edit: Added a mount for the logitech quickcam The PCB enclosure fits the logitech pro 9000 & older logitech c920 webcam's. An articulated webcam mount that mounts to aluminum extrusion. The webcam used is an old Logitech Pro 9000. I…
A Medal I made for a costume. It's a bit of a mess since I threw it together in the slicer. In case you're unfamiliar with the Emu War (a real thing): https://en.wikipedia.org/wiki/Emu_War
I made the model articulated! You'll need 6mm x 2mm magnets Print Settings Printer: Seckit-Go Rafts: No Supports: Yes Resolution: .16 Infill: 20 Filament: Don't remember PLA woodfill Category: Sculptures
Ikea Lack End Table Leg Support Lack coffee tables sure are great for the price but they're also super flimsy & jiggly. Their jigglyness makes using them as a printer stand a bit problematic. For that reason, I went ahead and threw…
This is a workshop table I made a while back. At the time I had bunches of 2x6 boards left over from something else so that's all I used to make the table. I cut all the pieces before assembling it in place and it all worked out. The work…
These bed supports make the bed much more rigid (to a surprising degree) than the completely printed bed supports I was using previously! I've also included a .STEP file of everything to make editing it easier. 3/4in Angle Aluminum Ender5…
How to use a pasta guitar: Note: The person in that video is being a bit weird with it. Just strum the strings like a guitar & all the pasta will immediately fall down. What you'll need to make my pasta guitar: Length of 1"x4" wood 2x of…
Update 2020-03-25: Now completely compatible with the Ender 2, 3, & 5! Replaced BLtouchMount & HotendMount-V3_1 with updated versions. I removed the heatshield & made a few minor usability improvements. Added:…
This is a simple back plate raspberry pi mount for the Seckit-Go. It works for any raspberry pi case with mount screws at 68mm x 98mm. You can either press fit m3 nuts on the mount or screw in m3 bolts. Category: 3D Printer Parts
This is a replacement cap for the Protimeter Surveymaster. I recommend printing it out of PETG for the material's springyness. This cap snaps in place & holds better than the original 👍
These are the auto mechanism on a Buck knife I'm currently restoring Edit_2024-12-10: I added a cut guide for the knife body as measured on my knife. Some of the measurements are a bit wonky because it appears like whoever did the…
My dogs figured out how to pop the puppy gate so I made this.
Some hardware I printed to make a few lamps out of vases earlier this year. I drilled holes in the bottoms of the vases using a diamond hole saw. I made these parts specifically to fit these two vases. Feel free to ask if you have any…
I noticed that the airflow was very minimal using the original design despite my 24v 4020 sunon fan. This extension seems to increase the airflow across the stepper drivers by a good bit. The version I uploaded here is shorter than the…
These hooks work for ~3/8in width straps. The slots are 10mm wide. Category: Accessories
I dropped my monitor on my keyboard and broke the feet. Superglue wasn't cutting it so I made this. Category: Office
In true to form fashion, this very print failed! This placard foretold my coldend jam during the second filament change! Print Settings Printer: Seckit-Go Rafts: No Supports: No Resolution: .2 Infill: 13% gyroid Filament: Don't remember…
This is a vertical mounting bracket for the Voron Design Mobius Extruder Category: 3D Printer Parts
This is a ziptie brace I used to secure the insulation to my printer's enclosure. Category: Household
Purpose of this device: To install insulation in walls that have been flood cut 2ft or 4ft high. Maybe there never was insulation in your walls or maybe there was cellulose insulation that fell out or got wet. There are few options when…
The original ring assembly on my old router kept flying apart & dropping the set height. The original replacement part is long out of production so I made my own. Tested & works great. It may work on some other model routers from rigid &…
This is an X-Carriage/Frame mount for a 10x20mm cablechain Print Settings Printer: Seckit-Go Rafts: No Supports: Yes Resolution: .2 Infill: 100% Category: 3D Printer Parts
To wszystkie aktualnie dostępne wyniki.
