Liczymy pasujące modele…
3D Printed Long Tooth Comb This comb is great for beards and medium hair. We print these combs using PET-G filament, Strong semi-flexible Plastic. This Comb is designed by Mark Rattelade Also available for purchase at…
3D Printed Street Cat Mask, Half Face Mask, Delukart Original Design This is a 3D printed wearable Street Cat Mask you can use it as it or paint it. Great for costume parties / festivals / Halloween and more. This 3D printed mask will fit…
Here are a couple of climbing man wall art sculptures I designed . Print Settings Printer: custom cartesian Rafts: No Supports: Yes Resolution: 0.20 Infill: 20% Notes: For a better finish where the supports contact the body i suggest…
i needed a spool mount for my new 3d pen but didn't like the spool options out there. so i took and remixed and reworked the spool mount from BManx2000. and created a mini master spool for it . also added hooks and a tpu strap to secure…
i needed a pocket to hold my apple controller and other things on my side of the bed where there is no room for a table. easy print with no supports . Print Settings Printer: custom cartesian Rafts: No Supports: No Resolution: 0.30…
This comb is great for beards and medium to thick hair. We print these combs using PET-G filament, Strong semi flexible Plastic. This Comb is design by Mark Rattelade Also available for purchase at…
This is my own design of a demon warrior battle worn mask. This 3D printed mask will fit most adult heads. Height: 9.75" Width: 6" Length: 4.25" Great for costume parties / festivals / Cosplay /Halloween / and more. You can buy it Hand…
I had put the original two pieces together in cad but ended up with a ridge line . I then asked the maker to upload the file in one piece . but i decided to remesh the two pieces to clean it up a bit and join them. before he posted the…
here is a great 40mm alternitive to the stock cooler. i printed it in pla and tested this on some long builds (12 hours+) and no melting . worked great.. i also added a lowered one . its 0.50mm lower to realy get it as close to the plate…
I created this box in fusion360 as a gift for a friend and decided to share.. Also available for purchase at https://www.etsy.com/listing/292976475/green-3d-printed-jewelry-box-3d-printed?ref=shop_home_active_16 Print Settings Rafts: No…
this is a simple but very useful add on to make bed adjustments easier. they press over the original knurled bed nuts. (with just a bit of force to ensure they hold tight with no glue) Category: 3D Printer Accessories
This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket. This mod gives you stronger y motor bracket and a better idler tension . Also changes the belt path to be…
I just dont like the stock spool holder. even though its metal it is still weak.. i find it sagging as soon as i put on a roll of filament. here is an alternative to the stock holder. (much stiffer) also has a hole for a lockdown screw so…
3D Printed Long Tooth Comb This comb is great for beards and medium to medium hair. We print these combs using PET-G filament, Strong semi-flexible Plastic. This Comb is designed by Mark Rattelade Also available for purchase at…
(updated a new cooler option v2 with a bigger openings ) this is a 3 in 1 mount and cooler. designed for a E3D threaded v6 equipped with a volcano block v2 to give you better print quality and more z height (i got 48mm max extra in z)…
this is a cooling base for a heatbed mosfet (same as pictured) it fits on 2020 extrusion using m5 screws . The mosfet attaches with m3 screws . (has threads for m3) Takes a 40mm box fan that attaches with m3 screws . (has threads for m3)…
Well needless to say the toilet handle broke one night and the hardware store was closed. so what do you do ?? make a replacement in cad really quick and print it up on your 3d printer of course. Ahh the joys of 3d printing a daily used…
somebody asked for a fan adapter to use a 30mm fan with one of my 40mm coolers. enjoy.. also added one with a open source hardware badge. Instructions i printed the plain adapter at .2 layer height 10% infill and the osh one at .15 layer…
UPDATED. i was asked for a bumper . here is v1 . (please post pictures of makes i would like to see my drones around the world..) I decided to try something different with my hubsan x4 frames .. got tired of typical h frames and so on..…
here are some comparison pictures . first two are from the stock cooler and the next two are from my upgrade cooler. the last two pictures the stock is on the left and the upgrade is on the right. here is a pla alternative to the stock…
This brace I created for the wanhao duplicator 4s will greatly improve your prints by eliminating z-axis swing.. first two pics of other things is showing the weird swirls and rounded waves before I installed the brace. the last pic shows…
the latest and greatest in my pla cooler collection for the Di3. i have been testing this for weeks before releasing it . takes a 75x75x30mm 12v blower.(i had a few laying around) but can be bought here:…
i just added a foot for an actual o-ring (size =11/16"x 7/16"x 1/8") im using this one now and it works realy nice.the o-ring holds in nice and tight but also gives you plenty meat under the foot for cushion. added v4 as a request . also…
these are a simple alternative for the uncomfortable original thumbsticks for the hubsan line of controllers. It saved not laying flat so you will have to make sure its sitting flat to print.. Category: R/C Vehicles
Helps keep heat inside by holding the door closed.. Instructions made in pla at 20%.. Category: 3D Printer Accessories
I designed this door lift hinge for my wanhao duplicator 4s because I got tired of having to flip open the door... now the door stays open with no clips or anything else . and even keeps the door closed with no door latch needed. door…
(Updated) i have updated the model with slightly bigger openings for the threaded rod. and also added a sat file for anyone that feels necessary to modify it as long as credit is given.. Here is a Z tower brace mod that I have created to…
this is a simple press fit touch pen holder (so i dont misplace it). it just press fits over the 2 left side screen m3 mounting screws. prints standing up with no supports. Category: 3D Printer Accessories
this is used to hold my extruder cables on my east3d gecko. Category: 3D Printer Accessories
this is a duet wifi mount and paneldue enclosure set for the East3D gecko. (Added a paneldue touch-pen and sd card slot pen holder for the top of the paneldue) (models may not be properly positioned on build plate) how to instal : 1-…
I created these to fix an issue that i had due to poor handling by the courier . Parts Needed. 4x 3d printed z wheel carriage 4x http://openbuildspartstore.com/delrin-mini-v-wheel-kit/ 8x…
This is my remix for the east3d gecko .(this is the M3 screw version. 30mm M3 screw and a nut needed) The body has been modified. It now holds the m3 nuts in place for you. the 30mm fan mount now only uses 2 m3 screws. ( i added threads…
(updated aded a v2 50x50x15mm fan with a 3mm shorter opening .) (update-- added a 50x50x15mm version for those that have that size blower) here is my newest style coolers . the b-cool line are for getting great overhang results and just…
((update)) ..I added a 10 degree tilt to the cooler and lowered the attaching point for the cooler on the arm by 1.50mm .. to keep the cool air off the head and more aimed at the extruded filament.. when i have another day off i will…
This is a new Hybrid prusa mk3-e3d-remix part cooler for the east3D gecko coreXY. will work with titan extruders and e3d v6 setups. (this is the new prusa mk3 part cooling nozzle from prusa3d.com - slightly modified by me. ) Mounting the…
this is a update to my circular cooler.. here is a short clip of how to remove the support in the center. http://youtu.be/8WbzcWoruYk pardon my dirty hands in the vid . just got home from work.. Category: 3D Printer Parts
just a simple yet effective face for the wanhao i3. new slightly rounded face edges. angled bottom to line up with the bottom of the control box.. and also included a closed bottom version .(for those that want it closed.) has a nice…
this is a magnetic spool roller add on for the TTrees/East3D sapphire series 3D printers. parts needed . 2x 625-2RS bearings 2x m5x1mm precision washer 2x m5x8mm or longer Low Profile Screws 2x 18mmx3mm Neodymium Magnets installation.…
This is a cable chain mod to help cleanup the dangling Y-endstop wire. and a tie down for the x-y motor wires. ( i used the small cable chain that i took off my duplicator i3 x axis..) Category: 3D Printer Accessories
Here are my mounts to convert your sapphire S from the lerdge board to a Duet maestro (original or clone) with a 5" pannel due screen (with vented front grills for version without power button only) With a 3d printable touch pen and sd…
This is a great working Z rod bearing brace for the East gecko coreXY uses m5 screw and t-nut to attach to the 2020 extrusion and (optional)uses a m3 screw to lock the 608-zz bearing in place . i didn't lock the bearing in place with the…
UPDATE. ((uploaded a v2 of the 40mm fan back plate . now easier to install . first plug in all cables then slide new cover over wires. )) (( i added a v2 of the radds display back.(v2 has a display bracket mount on both sides instead of…
I seen a couple versions of this type of pulley brace (like the idea) but i wanted mine to lock in place using the original equipment and is wider than all others for stability . this version holds the m4 nut for you and has a bearing…
To wszystkie aktualnie dostępne wyniki.
