Liczymy pasujące modele…
Pissed off with another cleaning of spilled silicone gel balls - I quickly made a funnel for filling containers. Two versions - one printed straight, the other in vase mode. The normal version takes a little over 20 minutes to print but…
Mounting for two rods to the Ikea billy wardrobe, ideal for storing filament spools. Designed for maximum capacity - this mount does not interfere with the spools either in width (they can be from the wall to the wall of the cabinet) or…
This is a case for BC-250 board-computer, to use it with cheap 12v PSU - from HP server, like HSTNS-PL28 643954-201 (gen6, gen7 - reachable under 10$/10€ in state "like new"/new). It can be 460W, 750W … How to connect this thing to BC250?…
I made two types of connectors, which work with Karcher vacuum cleaners - WD2, WD3, WD4 familly etc : for 40mm spiral pipe - with “left” thread - with “right” tread for 50mm pipe: - straight simple version (for non-spiral pipes) - blank…
Lid - have hole for screw, can be mounted to something. In the fact “lid” become base in this way ;) Base - fits tight to Lid. There are two version, one blank (only hole for led light), second - with a small recess “18” (like 7-segment…
This is mount made for V4 for v3 you can find here: https://www.printables.com/pl/model/665417-wall-mounts-for-bambu-lab-ams-newest-ams-version-v for v2 is source in origin of this project:…
4 hdd/ssd cage. Made for 7.5mm height ssd, but bigger hdd will fit (up to 9mm). Heat-inserts M3 x 4 x 5 or 4.5mm (optional)
This is a simple fan adapter, that allows you to mount the blower 5015 in place of the standard fan 4010 4020 etc, without significantly increasing the thickness of the entire object. For example, as an airflow in front of an extruder At…
I adapted a good design of the AMS holder (e.g. to a wall or a cabinet) https://www.printables.com/pl/model/438001-wall-mounts-for-bambu-lab-ams to the latest type of AMS, which has wide spacing between reinforcements.
Dell Wyse 5070 in Extended (fat) version have a little smaller hole for secondary ethernet port, than normal 5070. So there is small bracket for securing Ethernet port from this : Aliexpress M.2 key A+E RTL8125B network card…
fan (140mm, better some speedy fan, 1800-3000rpm at top speed) is mounted to top part, then bottom part (coupling for air purifier filter) is screwed to fan base.
A box that is supposed to imitate a block of minecraft ore - after adding an rgb led inside, glowing bright blue or red - it will become a beautiful imitation of diamond ore, redstone or lapis. Could be a nice night lamp. The outer box is…
Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…
Two sizes - one for naked glasses ("low"), one higher is for glasses in case/etui Two types - without and with ("fill") filling the back and front parts at an angle - to make it easier to print (without small overhangs) and: Two types -…
This is small mod of file stealthburner_printhead_dragon_rear_cw2 from orginal Stealthburner head, for fit with Voron Tap module. where four screws, mounting vertical MGN9 carriage, interfere with printhead rear housing. The one and only…
Just added 20, 100 and 120 numbers on both sides. Nothing spectacular, but heplfull
Needed: 2x (or 3x) Ikea Lack Table 304.499.08 (or other color, if you like) https://www.ikea.com/gb/en/p/lack-side-table-white-30449908/ and another 4 legs from table like this (so buy 3 tables, or go to “As-is” discount area in ikea…
Nice project, but little tricki to print at once. Look at screenshot, how to set on bed and set supports. Locking pin - when you put it inside and turn 90deg - its locked and dont fall of. Printed from PLA, on bambu X1, 0.2mm layer, with…
When you find a nice STL object, but unfortunately it doesn't have any holes to hang on the wall. 1. Load your STL object to slicer (prusaslicer, orcaslicer, bambu studio etc). ups! It cannot be hanged on wall! no holes on back! 2.…
Ikea has inserts for Kallax shelves, with doors (full, or with holes in the Skadis style), but to install them - you have to put the entire box filling the shelf, and through this box the door hinges are screwed. It is not always…
Nice Ender3 / Ender3pro Ender3v2 mod - front panel like in Voron Trident: https://www.printables.com/pl/model/428500-tridender-skirts-for-ender-3prov2 My pictures (screenshots) says all - in this project - is missing small red distance…
Ikea has inserts for Kallax shelves, with doors (full, or with holes in the Skadis style), but to install them - you have to put the entire box filling the shelf, and through this box the door hinges are screwed. It is not always…
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
This casing is visually dedicated to the Cudy TR3000 (AX3000) Wifi6 Router - which run on OpenWRT :) (Chinese or clean image) (but of course it will work with practically any device that needs 5v, and up to 3A) Inside we mount the UPS…
trochę ulepszone elementy drukowane na mendelmaxa 1.5 - z podwójnymi osiami Z, bardziej solidne. Możliwość montażu dual-Y silników do napędu stolika (np do zrobienia MendelMaxCNC) Możliwość montażu dwóch silników X (po obu stornach) do…
This model was designed for Asus Prime AP201 ATX (mATX) case, and some big tower CPU cooler, like Thermalright Peerless Assassin 120 etc. Size 120x120 (12cm) like 12cm fan. 65mm (6.5cm) height - can be modified (scaled in Z-axis) in your…
A long time ago, when GPU prices were cosmic, I managed to buy (probably from a bitcoin miner) AMD Radeon Instinct MI8 graphics cards - Like a GPU but completely server design, without its own cooling, and without its own image outputs.…
This is only support plate for leds. Yoy can use led strips, led COB or what you have - glue it to this plate This is plate for lamp with vw part number 7e0 947 105e and 7e0 947 105f - used in VW caddy, transporter, crafter etc cars.…
A holder above the worktop for a microscope camera from aliexpress, described as 36Mpix (it will probably fit others where the lens is of this type, on C-mount). camera bought here: https://www.aliexpress.com/item/32827892872.html plus a…
The battery holder (L and R side) is universal (fits many projects with makita batteries) and uses a standard ready-made insert “makita battery connector” (yellow or black e.g. from here:…
This is simple mod for Voron Afterburner (can be mounted on Stealthburner too, with simple adapter bellow pcb https://github.com/MotorDynamicsLab/LDOVoron2/tree/main/STLs/LDOSBCW2MountCover ) PCB board from FYSETC “…
Oryginalna obudowa Asus Prime AP201 (obojętnie która wersja - ze szkłem, siatką, czarna, biała) ma nóżki od dołu 25mm wysokie. Stawiając taką obudowę np na dywanie - nie ma jak ciągnąć powietrza od dołu, a na pewno działa jak odkurzacz i…
Ramka (puszka) elektryczna, do ściany z kartongipsu, gdy nie potrzeba (lub nie chcemy) mieć tylnej części puszki, by mieć np pełny dostęp do przestrzeni za ścianą (np do umieszczenia tam elektroniki smart home) Wymiarowana pod typowy…
To raise the X axis in ender 5 and related printers. Raising the X axis by 20mm allows you to increase the working area in the X axis to 245mm (over the size of the table, so the bltouch can sample the entire table) Lifting the axis is…
Ramka (puszka) elektryczna, do ściany z kartongipsu, gdy nie potrzeba (lub nie chcemy) mieć tylnej części puszki, by mieć np pełny dostęp do przestrzeni za ścianą (np do umieszczenia tam elektroniki smart home) Wymiarowana pod typowy…
I have found rack19" power distributors, made from aluminium profile (pic here) and slide-in modules - in my was 3x 3sockets module, and power-switch. Because my distributor have 2 sockets damaged - I trow 3-socket-module and make…
This is an insert for the Elektro-Plast Elegant IP40 teleinformatics box model multimedia surface-mounted distribution board 2425-20 It allows for the placement of fiber optic loops, pigtail splices with welded connectors, and hiding them…
Led posts for corners, for Ender5 and similar. In the base, the hole for the M4 screw, the thread is included in the model - but in order for it to screw in well, it should be threaded again after printing. The height of the post is 60mm,…
Simple mount for Ikea Tertial desktop lamp, to 2020 extrusion profile (v-slot profile) etc. Made for 2x M5 screws, 10mm long. Hole for lamp base is 13mm in diameter. Mount is long enought to not colide lamp base and aluminium profile,…
Wersja głębsza, solidniejsza, z możliwością ustawiania obok siebie kolejnych puszek (standardowy rozstaw otworów na kolejne gniazdka/włączniki - 72mm). Plus dodatkowe narzędzie do celowania otwornicą co 72mm. Ramka (puszka) elektryczna,…
Coffee table welded from 18x18 profiles - it scratched the floor when moved. And on the carpet - it was hard to move it. I got these legs. Steel profiles that I bought to build a table - they were supposed to be 18mm x 18mm, in reality…
diameter reduction for vacuum hose, standard "bosch/electrolux/etc" (32mm) to Miele etc (34mm) Originally made for https://www.printables.com/model/145672-valuables-separator but can be usable for many tools. Good to print it from…
Version 1: single. When you make Kallax double-box, with two doors, but so that they open independently. Then the door on one side gets a printed " single " addition, and after closing the second door rests on this addition. Screwing…
Ramka (puszka) elektryczna, do ściany z kartongipsu, gdy nie potrzeba (lub nie chcemy) mieć tylnej części puszki, by mieć np pełny dostęp do przestrzeni za ścianą (np do umieszczenia tam elektroniki smart home) Wymiarowana pod typowy…
Covers closing the side openings in the Junkers boiler casing. Mounted with magnets (easy to remove) 6x2.5mm (or 6x3 too) There are many places for magnets, 3 were enough for me to stick to the housing very well. At the back of the holes…
A straight distance pad, which fits the size of IKEA Kallax cabinets hangers (and many others), allows you to move away from the wall by a few millimeters. Versions 2, 3, 5, 7.5, 10mm included, but they can also be easily scaled in the Z…
In Convoy 4x18 flashlight - glass lens is held by ring - which it is hard to unscrew by hand. Here I made some tool for help :) Print from any hard material (if you don't use it in +45'C environment - PLA should be ok) with 3 walls, and…
Popular mechanical key lock in many ATMs and safes: S&G 6880 (and family 6800) - this is optional front cover 6880-511 (this is simple version, without swing cover like 6880-500). Holes should fit in typical safe box with predrilled…
To wszystkie aktualnie dostępne wyniki.
