Liczymy pasujące modele…
Remixed the original top case as I couldn't get the screen centered and flat to the print while blind soldering. Tested this on 3 prints and they all centered nicely and keeps the screen flat. If you use a different OLED screen than the…
This is the GBP Player shell for the Panasonic Q but you can use the original GBP player internals for the Q. I took inspiration from the original design from 0Cordo but couldn't work with the files in Sketchup Free Web so I started from…
Added Tandy Logo to make it look like a DOS era external floppy drive.
This is the complete Open Hardware KI Dual files and guide to create and install the Killer Instinct Dual mod on KI1 PCB. I created the 3D print files for the respective areas from scratch to help simplify the installation of the mod, not…
This is a shell for the receiver (emitter) and the power pcb made by eatnooM. If you're interested in his Emitter PCB, see GitHub - eatnooM/sensorstrip: USB-C powered, slim IR emitter for use with Wii / light guns You can print most of…
The summary explains what this is. I used default PLA settings on my Bambu Carbon to print. Print vertically and you won't need any supports. Might need a brim if adhesion is an issue. Mount the GEM using GEM's mounting screws, then…
Made some PCBs that came unbeveled on the edge connector, even though I requested the service, so instead of manually freehand a bevel, I made a jig to evenly bevel the edge on standard 1.6mm thick PCBs. It uses sandpaper and works well…
I installed a 3DO Retro GEM into my FZ-1 and could not get the WiFi to work correctly. Turns out the antenna mount location and being in a horizontal position next to the Shield interfered with the connection. Anyways, this took a long…
Sinden lightgun users know how difficult it is to get everything together to setup for PS1 and PS2. Dunne.karl has taken upon himself to simplify the process. With creating the Arduino PCB for hookup, I decided to create the custom shell…
Made a support base that can house 2 wireless controllers (maybe wired as well, but not tested), Robert's USB2PCE adapter, and USB TurboTap. There's enough support to hold the SSDS3 as well and won't tip. Requires 4 - M3x8 machine screws…
This is a solid battery mod for the Panasonic Q so you can swap batteries easily when it dies. The current method to desolder the old battery and use a like-for-like replacement; that's not ideal cause the pads on these PCBs are beyond…
I recently built the Sega Neptune from scratch using cosam's PCB. When I tried fitting the Genesis 2 shell with the RGB LED, the light pipe was blocking the shell from closing. The RGB LED is bigger than the original, so I made a 1:1…
The HDMI bracket supplied in the Git just doesn't fit right on my support bracket with the PCB in place. The OG model raises the screws up a little too high and just doesn't engage the bracket, so I had to design a new bracket from…
I've been looking for a case for my Sega System16b board for a while and missed some opportunities and then found out that Jasen's Konami Case could actually fit the bill. After getting some internal dimensions from a fellow arcade…
Simple hot air tip storage on the Yihua 959D hot air station. I somehow ended up with 8 tips so I expanded the original model to hold them all and also to make it sit flat against the tool station. The angle was also modified a little so…
Update June 1, 2026: Added SIMM size labels as it became apparent when I was programming mine that I need to see which socket / connector was which. This is a cover plate for the OSCR CPS3 adapter designed by herzmx. I didn't like the…
I was surprised that I couldn't find a simple case for a logic probe. Every search came up with homemade ones or a PVC-type storage so I decided to make my own. I took the Pinecil case and remixed it to give it a proper home and to…
I accidentally cracked my original cover that had screw holes. The new ones posted by Kytor are different so they don't fit. I decided to remix the original cover to have multicolored labels so they are easier to see.
A friend of mine made the rotary switch mod for the SSV (Sammy Seta Visco) 4-in-1 multi, so I decided to make the mount and shell for it so it has a home and makes switching games a breeze. You'll need a few things to make this. BOM: - 2…
I recently bought the GQ 4x4 programmer with the ADP-056 adapter and that large PCB had no protection and much worse, no support for the massive weight hanging off to the side. I decided to rectify that with a full enclosure with the…
I bought the beautiful case from TRFightstick for my CPS3 pcb but the ports on the back are open and aren't necessary in some cases, so I made a set of port covers for them. Print in TPU so they easy to plug in and pull out. I used…
Marqs made an awesome HDMI mod for the CPS2 system but no one has made a mount yet cause the entire board just sits on some pins that sits on 2 ICs. Just too much pressure would be put when inserting and removing the HDMI cable, so this…
To wszystkie aktualnie dostępne wyniki.
