Liczymy pasujące modele…
A simple screw top container for camping cutlery. The top cap mimics a nut in order to make it easier to unscrew while preventing the tube shaped container from rolling. The cap can be customized with a name using simple applications like…
If you do not know what it is used for, then you probably don't need it :).
Update 2-JAN-2025: Added ExtensionV2 part that adds an extra 25mm to the body length. Update 17-DEC-2024: V2 has an slightly increased width and height since some users were experiencing a very tight fit. Be wary of material shrinkage and…
A compact cutlery container with screw-on nut shaped cap to prevent it from rolling off the table. This is an upgraded version of my previous model ( https://www.printables.com/model/258220-camping-cutlery-box ) The upgrades include…
Porsche logo that can be printed using a single colour printer. Print porsche_logo_black_yellow using a colour change mid print to change from yellow/gold to black. Print porsche_logo_red using red filament. You might want to change the…
This is an upgrade over my older model https://www.printables.com/model/258177-stackable-toilet-paper-dispenser-v2 This one is sturdier, uses dovetail joints and, depending on your printer's calibration, might not need glue for the parts…
An easy to print tool to keep the bed sheets in place. 100% infill recommended Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Any PLA Any Category: Organization
This is an upgraded version of the original and popular sheep toilet paper holder design https://www.thingiverse.com/thing:3705577 by Hiob. The upgrade includes stiffer, easier to mount brackets into which the updated profiles (sheep_2…
A conversion from an easy to print model to make it wearable on a Scout/Girl Guide neckerchief.
A Scout woggle inspired by The Mandalorian. Parts can be printed, without the need of supports, using different colours and then glued together. Depending on tolerances, glue might not be required.
Print the inset in black PLA and the "Outer" part in any colour (usually green but the example uses glow in the dark PLA.
This designed was inspired by the wind turbines in the Dyson Sphere Program video game. It uses partly 3D printed bearings and is meant for decorative purposes, although it can be attached to a magnetic rotor to generate a modest amount…
Enclosure for Lithium battery shield module similar to this one (4x model) . Requires following extra hardware: one 4X 18650 Lithium Battery Shield V8 four M3x8 counter sunk screws four M3x16 counter sunk screws four M3x6 brass threaded…
Trays for sorting €2, €1 and €0.50 coins. Each tray is 145mm long and was designed for a specific cash box I had in my office but it might fit yours too. Alternately, one can use this model: https://www.thingiverse.com/thing:4786176…
You can add as many turbines as you like and set them to rotate in any direction you want. The included brackets are designed for 34mm pipes, but you can use zip-ties to attach the shaft to a pole. You can see it in action here: Parts…
Print the two parts. If horizontal expansion is set properly, the peg will fit inside the outer ring with the marker line that is closest to the base aligning with the surface of the outer ring. Otherwise the number of visible marker…
This is a remix of the beautiful design by jreimers ( https://www.thingiverse.com/thing:2927535 ) and it addresses two issues: The original design portrayed a left hand. Scouts do their this gesture with the right hand (although they…
Simple November themed woggle for Scouts.
Easy to print modular spray can rack. No supports needed. The rack can be fitted to a wooden or MDF base using self tapping screws and the sides and brackets can be fastened with M3x15 or M3x25* screws and nuts. The sides will need to be…
This design has been superseded with this one: https://www.printables.com/model/519638-magnetic-axe-cover You just need to print two of these and glue them together to get a whole part. Although the cover stays in place thanks to the…
The circlip that came with the original design ( https://www.thingiverse.com/thing:2670620 ) had a habit of getting pushed out of position when tightening he jaws. So I designed this alternate part that can be tightened in place to keep…
Merging of two amazing projects together Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.12 Infill: 20% Filament: Any PLA Any Notes: I used CURA's experimental tree supports for this and it…
An alternative take at the popular XYZ calibration cube. This one is a 30mm cube with peg and hole parts to also test for hole horizontal expansion (Cura) or XY offset (Prusa Slicer).
This design fits a very specific organizer model manufactured by Parkside like the one shown in the picture. There are (currently) two configurations. Although they are named according to the section they fit in, they can be mirrored so…
Shelf for mini figures with a height of up to 60mm. Looks great with wood PLA. Author's 3D printing Facebook page: https://www.facebook.com/3DPrintNoob Category: Organization
The tiles can be configured for any of 2 to 8 player modes. Game rules can be found here: https://en.wikipedia.org/wiki/Tock To build this model, you will need: 32x cylindrical rare earth magnets 3x8mm 28x countersunk M3x8 screws 2x packs…
The breeder net I had was designed to hang by the edge of the fish tank. Apart from preventing the tank lid from closing properly, this setup was also keeping the breeder net's top edge high up above the water line, which was leaving…
This model, unfortunately, requires supports for the face details. Print the inset in black and insert it inside the outer model for the two colour face detail.
This modular shelf is based on a similar shelf originally designed for Lego minifigs. This version has a flat base.
A set of tools to help in the building of the tracks for a 1:10 Tiger remote controlled tank by Luboš Hort ( https://www.3dprintedtanks.com/tiger1info/ ). The tank requires a total of 194 track segments and pins. The…
Just another take at the popular filament spool drawer design. This one adds a few improvements like magnetic latch system, customizable compartment sizes and slots for fitting name tags to show the compartment contents. The spools I used…
I have some small hardware parts, like screws, nuts and washers, that are organized into similar boxes (210x210x45mm). Although the boxes are mean to be stacked over each other, it was becoming annoying to have to lift the top boxes when…
This model was designed for the purpose of getting the threads of a model tank off the ground while testing. But it could be used for other purpose, just like the real life wooden trestles it is meant to emulate. It requires 2x M3x10 dome…
Just needs three M4x30 self tapping wood screws per rail. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: Any PLA Any Category: DIY
A simple tool to simplify cutting the wires to the correct length for a UK BS1363 plugs
Rubber feet meant to fit the hexapod from this project: https://www.instructables.com/id/Simple-NodeMCU-18-DOF-Hexapod/ Printed using TPU 95A so that they can increase traction. Print Settings Printer Brand: Creality Printer: CR-10S…
A camera fixture for this type of fish eye lens web cam: https://www.ebay.co.uk/itm/HD-1080P-PCB-Board-Camera-170-Degree-Fisheye-Lens-1-2-7-CMOS-OV2710-Module-USB/323563192594 Print Settings Printer Brand: Creality Printer: CR-10S Rafts:…
This is a replacement winding key for the fantastic Small 8 Day Clock clock model by Steve Peterson. The clock design can be downloaded from here: https://www.myminifactory.com/object/3d-print-small-8-day-clock-337387
Allows mounting of clocks inside a Bambu Lab so that time lapses can give a better idea of time taken by the print. The bracket mounts on a ledge that is on the opposite side of the camera. It had to be set in such a way that the clocks…
An alternate winding key to replace the crank that comes with the original model (see link below). https://www.myminifactory.com/object/3d-print-32-day-clock-easy-build-156759 Print Settings Printer Brand: Creality Printer: CR-10S Rafts:…
This is a motorized upgrade for the popular Flying Sea Turtle model ( https://www.thingiverse.com/thing:3758189 ). All the parts in the original design remain the same except for the shaft. You will need the following extra parts: Motor (…
Couldn't find a simple bracket to fit under cabinet led lights like the ones I had so I designed my own. Printed using PETG for extra flexibility on the clamp. Might work with PLA too. The light bars can be mounted with M3x12 counter sunk…
My septuagenarian mother loves watching Netflix on her tablet. She would rather use her tablet than a Smart TV. However she complained about neck ache when watching it while the tablet is on the table. So I made this stand for her so that…
Parking disc to indicate how long your car has been parked in a time restricted parking space. The disc and front cover (P) can be printed using multiple colours using the M600 command to change filament mid print. Since this is meant to…
Have a small parts box that has customizable walls for changing the size of the compartments, which I use for storing various values of resistors. The problem with it was that resistors kept getting beneath the division walls. I am not…
If like me you are fed up with the suction caps falling off the walls of your aquarium here's a possible solution. This clamp uses magnetism to hold your heater or pipes to the wall. It uses 8x3mm neodymium magnets placed on both the…
If you are like me and forget to drink your X amount of water every day, here's a little tool for you. This abacus helps you keep track of how many cups of water you are drinking every day. There are 3 variants of the counting "cups", a…
The Tiger 1 from 3dprintedtanks is a fantastic model. This part remix aims to make it even better and more resilient. Extra hardware required are a M4x80 countersunk screw, an M4 lock nut, and two M4x10 grub screws. It is recommended to…
This model is meant to give viewers a clearer indication of the size of the model it is placed beside in a photo. It is an improvement over the original size comparison totem ( https://www.thingiverse.com/thing:3144295 ). The advantages…
An advanced version of this model can be found here: https://www.thingiverse.com/thing:3175057 I often found myself placing a €2 coin near my models when photographing them in order to give the viewer an idea of the size of the model.…
To wszystkie aktualnie dostępne wyniki.
