Liczymy pasujące modele…
When building electronic an prototype, using a solderless breadboard or a PCB, you always need to bent leads of components to the correct spacing. A lead bender is a good tool for this. This design is a remix of OneByteGone's nice lead…
This is a tiltable stand/holder for the tinySA ULTRA spectrum analyzer. The tinySA ULTRA is a very nice spectrum analyzer but is designed to lay flat. This stand allows you to tilt it to make it easier to use on the bench. It tilts from…
In the 1960's Lionel sold a train set with a car that fired a missile. I have this car but it was missing the missile, so I designed one from pictures. Fits well, flies ok, and seems strong enough to hold up. The upper wings require…
This is a cap to cover an unused hole in an Aerogarden. Also in the download is a pdf to print that has the circular covers for the pad. These are intended to be used when you plant your own seed and want to label the pod. Print Settings…
This is a group of test light pipes. The are designed to fit over a 5 mm thru-hole LED. They are not intended to fit any particular project, but to be used to explore designing and printing light pipes on a STL resin printer. In the photo…
This design holds up to 13 10", or smaller, blades for table saws, miter saw, or radial arm saws. It appears to be very strong - suitable for the shop. It was printed with PLA at 0.24mm resolution. Note: it does use around 470g of…
This is a remix of a parabolic reflector in which I modified the receiver holder mount to accept an ultrasonic ~16 mm diameter receiver. Used Cyanoacrylate glue (Krazy Glue) to glue the 2 halves and hot-glue to secure the receiver to the…
Here is a set of clips used to mark copper and PEX plumbing. The clips snap onto 1/2" or 3/4" pipes and allow you to add label maker text...or you can just use a Sharpie marker. STL files are included for both vertical running pipes and…
If you're like me you have collected a big bag of desiccant packets. I have dried a few of them at a time in my Sunlu S1 drier, but wanted a basket, that fit in the drier, to hold a pile of them. This download has 2 baskets. A smaller one…
This is a set of three bar gauges. Bar gauges are used to check inside dimensions on things like boxes, drawers, cabinet openings, etc. For example, when construction a wooded box, it is typical to check that the inside diagonals to see…
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring area of the mount. The mount just slides into position at the very front of the dryer interior - no screws or hardware…
This covers over the logic analyzer (LA) connector on the front of a RIGOL DHO900 oscilloscope to protect the pins. Tolerance is close. If needed for snugness, increase the length a little in your slicer. 12/21/2023: Added A TPU version…
In the 1960's Lionel sold a train set with a car that carried two Mercury space capsule. I have this car but it was missing the capsules, so I printed a couple. The model was actually from NASA at "…
A Generac whole house generator has 4 lifting holes near the base. These make a very nice home for critters (until the generator starts). Unfortunately Generac does not supply hole plugs. This design covers the hole very tightly. I used…
This is a holder for up to 5 glasses/sunglasses. The 3MF design has been split into 2 pieces (using Bambu Slicer cut with 2 added snaps) so they can be printed with no supports. They printed fine, but I would change a setting when…
This is a project for a 10 MHz GPS Disciplined Oscillator (GPSDO) designed around an Arduino Nano. It provides a highly accurate and precise 10 MHz signal that can be used to improve the accuracy and precision of other laboratory devices…
This is a simple saddle square sized to fit a 2x4. It allows you to mark a line around 2 sides of the piece without moving. If you want a different size, you can resize in your slicer. Category: DIY
This is an auxiliary light intended to be used on a Bambu A1 Mini to assist in viewing the nozzle. The A1 Mini has a light but it is up higher an does not get a lot of light to the nozzle area. This light sits on the right side of the…
This is a remix of 3DPODesigns's “Bambu Lab P1S Wyze Cam 3/3 Pro Camera Mount” but this one has squared off corners and a slot cutout so it fits the earlier V2 version of the Wyze camera. UPDATE April 7, 2024 - Also fits the newly…
This is a complete design for a system to send and receiver data using ultrasonics. Besides being a useful system for sending data it is also intended as a platform for exploring concepts and firmware as used in software defined radio…
Many table saws, router tables, band saws, etc. come with less than accurate miter gauges. The scale and pointer can be very inaccurate. This tool allows you to accurately set the miter gauge to some of the common angles. To use, just…
The files here are for an adapter to convert a single LED from a WS2813B LED striplight to standard 5mm LED dimensions. This adapted LED can then be used in standard mounting such as panels. Also included is a square 17mmx17mm panel mount…
I wanted a spool holder to hold a filament spool above a Bambu Lab A1 Mini. By having the spool above it would mean more desk space. It made me nervous having a kilogram spool directly above the printer so I made it very strong and…
This is an enclosure for the "RF active probe 0.1-1500 MHz bandwith SMA output" by 60dBM.com ( https://www.60dbm.com/product/rf-active-probe-0-1-1500-mhz-bandwith-sma-output/ ). It needs a couple of other parts: Two M2.5x8mm button head…
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing…
This is a FFF printable cover for the Halot One Plus resin trough. It comes in handy when you leave resin on the trough overnight or longer. It offers protection from contaminates falling in and offers some reduction in odors. I printed…
This set of files demonstrates a way to make electrical pushbuttons and keypads. It uses conductive filament and PLA. They are formed using a layering of conductive filament and non-conductive PLA. Files included are 3mf and step. There…
This is a set of 3 supports/shelfs that are designed to hold the common hookup wire boxes. They can alsohold individual spools and small parts. These are intended for wall mounting using double sided tape. I used:…
This is a set of decorative wood hole plugs also known as button plugs and hole buttons. They are typically used in woodworking to cover a recessed screw. They friction fit, but a little bit of glue will assure they stay in place.…
This is a set of printable resistors and a slider to convert one of the resistors to a potentiometer. These are intended as a demonstration of using 3D conductive filament for creating electrical parts. These model may be of interest to…
These models are 3D printed capacitors! What are they good for? Good question. It was just an experiment but might be an interesting STEM or introductory physics class project. Let’s take a look the design. They are printed using two…
This project is for a simple, Arduino Nano based, frequency counter. It uses a GPS one-pulse-per second (1PPS) signal from an inexpensive module. Typical performance is ~10 ppb. Measures signals from 0.01 Hz to ~80MHz. The download has…
This enclosure is for a standard 20x4 line LCD. It pivots on a small base intended to be mounted, with 2 screws, to another surface. No standoffs are required. The 4 screws (M3x20) in the back hold the LCD in place. The enclosure is…
This is a holder for the Elegoo Air Filter (Air Purifier). It is designed to be mounted in the bottom left hand and/or right hand corner of a P1S. This is used to filter out odors from various filaments. The P1S has a chamber fan/filter…
This is a device to extend the legs of a Siglent oscilloscope. I made it for a SDS1202X-E but I assume it would fit their other model. Post a comment if you find it fitting other pieces of equipment (although I still can't see people's…
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
This is an enclosure for the knockoff RIGOL logic analyzer sold on eBay: https://www.ebay.com/itm/224648789536 There are 2 parts - after printing they are to be glued together. I printed them with PLA and glued them with Krazy Glue…
This is a complete design for a small usb powered device to generate a 20 MHz square wave with fast rise and fall times - in the 400 to 500 ps range. The design notes include the simple circuit with notes on assembly and…
This is a spindle and/or laser holder for a small CNC (SainSmart Genmitsu CNC). It is for use when you swap out your spindle for a laser and you need to store the spindle (or vice versa). It should protect them well, including the lens on…
The PS1 is a great printer but we all know that the camera is not the best and because its enclosed it can be hard to keep a close eye on the quality of a print as it prints. This model, called the Bambu Scope, is a magnifier that rests…
This is a simple device to prop up your bench meters, and power supplies so you can view them better. It can be used in two different positions to get different heights. Position a flat side on the bench and prop your equipment on the…
When using split-core Hall effect current sensors, they usually need to be calibrated (zero and gain). This calibration stand allows you to have 4 positions with various currents that the sensor can be clamped on to. The full explanation…
To wszystkie aktualnie dostępne wyniki.
