Liczymy pasujące modele…
UPDATED 2025-04-07: I made a hybrid of this design and the one listed below. The new design is the lightest of the three designs and incorporated positive elements of the other two. Here is the link: UPDATED 2025-04-03: I completely…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
This is a square section of 2020 T-Slot bar or rail (like extruded aluminum). Its dimensions are 20 x 20 x 20 mm. To use it, one would stretch or shrink the height of the model to the desired length. Being made of plastic filament, it is…
NOTE 2025-04-23: I just uploaded a depth gauge, which will make it very easy to determine the gap between the wall and electrical box faces. This gauge makes selecting the correct spacer thickness quite easy. That model is here: NOTE…
This is a compact remix version of kriswillcode's Fidget Toggle Switch. It is a little more than 25% smaller than the original, but uses the same mechanism. It has been changed in the following ways: The side view height of the main case…
NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…
This is a 2020 T-Slot removable locking/sliding fastener to be incorporated in other designs for attaching accessories to printers with 2020 bars. I have a Creality Ender 5 which has 2020 top and bottom rails or crossbars. UPDATE: BE…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
These are various styles of projectiles that fit in Adam-M's Catapult Card https://www.printables.com/model/211679-catapult-card . I printed the catapult in PETG, but didn't have anything to shoot in it, so I made these to fit nicely in…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
UPDATED 2025-05-12: I was cleaning my bicycle's cassette and pushed a little too hard, and near the tip of the tool, two teeth in from the tip, the tool broke and bent up. So, I redesigned these to have a little more material between the…
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
This is a simple hamster, or other small pet, headstone with an incorporated lawn spike for fixing it in place. I have included three versions: A blank version (no text or hamster image) With a hamster head image only (no text) The…
UPDATE 2024-01-17: I have completely redesigned this model, including the fit, the feel, ease of assembly, sizes and styles. I highly recommend that you check out the new designs: ----- This is a single wheel finger fidget board that you…
2026-04-25 UPDATE: I redesigned these so that they fit together in a nested arrangement on a pegboard hook. This makes the sets more compact and orderly, and fit on a shorter hook, or allow both sets to fit on the same short hook. See…
I have a Red Ryder BB gun, which has an awkward method of loading BBs. I wanted to design a clip-on BB loading funnel. Before starting that process, I did a search and found the original design. It looked like it would save me some design…
This is a game piece box with a sliding lid. There are design options for the box bottom and lid to have a mosaic pattern or solid surfaces, and flat or concave/recessed faces (on the lid). All of the lids will fit either of the box…
NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…
This simple design has a female end that receives the standard male hose end. I designed it so that there is no need for printed supports, and so that the print flow increases the strength of the printed model. There is also additional…
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
This is table top game where players slide a football playing piece across a table to try to score a goal. Additional points are scored by flipping the football through the goal post -- avoid hitting your opponent's face, if possible. The…
These are various chimneys for Lincoln Logs play sets, including the original design, embellished versions, varying sizes, and generic non-notched versions. The notch is so that the chimney rests on the apex of the log roof. The original…
Many door frames are not square, or the door hinges are not mounted correctly. This causes the door to not fit evenly in its frame. Often, a door will rub on the frame near the top on the latch side, making a rubbing squeal and/or making…
Simply put, this is a towel wall hook and decorative faceplate designed to be adhered to a wall with screws and fasteners. The hook is ideal for towels and other similar household items. I have included two .stl files, the wall hook that…
These are stencils or templates for marking or scribing concave arcs on corners in .25 inch or 5 millimeter increments. There are four versions: 4 & 6 inch, and 100 & 150 mm lengths. These are designed to be used with a mechanical pencil…
UPDATE 2026-08-12: Fixed missing divot for the latch on the 61 mm capacity box. UPDATE 2026-01-04: I added a 44mm capacity box. Apparently, the French version of Catan has number tokens that are a bit thicker. UDATE 2025-11-23: In…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
This is a remix of Owen TF's “Fidget Switch” : https://www.printables.com/model/764872-fidget-switch/comments . I wanted a small, simple switch that I could use as a reminder tool that I would carry with me in the coin pocket of my jeans.…
There are many online 3D designs and commercially available wind-up butterflies, as well as instructional videos for making them with wire, safety pins, etc. Most are fairly similar in their overall design and function. This design…
These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…
This is a complete redesign of my original “One Wheel Freestyle Fingerboard - Fidget Toy” that I designed about three years ago: Based on some comments, I decided to make the parts fit together better and to make available larger wheels.…
I used to store my tools in a cut in half, plastic container. I would often find myself digging through them trying to find the desired one (usually at the bottom). This was annoying, and sometimes a little dangerous when the cover was…
These are three designs for vibration dampening feet for 3D printers, incorporating standard 40mm squash balls. The models are designed for 3D printers that have 2020 or 2040 extruded aluminum frameworks (Ender 3, 5 10, etc.). The models…
These are medallions with various religious images or symbols or icons related to Jesus Christ, Christmas and Easter, touching on events, parables, teachings and miracles. There are 30 different versions (see model titles for brief…
UPDATE 2024-04-25: I uploaded a new version that has more surface area for gripping the tool, and the safety shield/wings on both sides now cover a wider area, reducing the chance of contact with live wires. NOTE 2024-04-08: I just…
This is a clamp and bracket adapter to interface with and mount a Loc-Line 2.5" Vacuum Adapter to a drill press with a 3" DIAMETER MAIN POST. The Loc-Line vacuum adapter and hose, as well as the bolts, nuts, washers, lock washers and…
This is a dice storage box with 7 compartments, designed to hold table-top game dice (Dungeons and Dragons, etc.) or other dice, as desired. There are 14 different lid designs (one blank lid with no logo, one D&D logo and 12 D&D Class…
This is a compact, low-profile headphone or headset hook that mounts on the top of a computer monitor. It uses minimal filament, prints quickly and is quite sturdy. The depth of the arm is 15mm, which matches the depth of the top of a…
I designed electrical outlet stand-off spacers for securing outlets to the electrical box while keeping the outlet flush with the exterior wall surface; that model is here: However, when installing and sizing these spacers, it was kind of…
Sometimes, dust and debris work their way into a keyboard key switch, causing the switch to be 'sticky' or to repeat key strokes. You can try to blow out the mechanism, but most blower nozzles are too big and they will not depress the…
This is a simple spacer, anchored by a screw, that goes between a wall and the backing of a piece of furniture (desk, dresser, bookshelf etc.). Its purpose is to help secure the furniture to the wall, particularly when there is a…
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
When designing models with horizontal pin hinges that are print-in-place, you generally want to make the hinges with as tight tolerances as possible, but not so tight that the hinge parts are fused together. This fusing can occur if there…
These are replacement pointers/clickers for WinSpin brand prize wheels (12" & 14" dia. models), with seven levels of resistance. The stock pointer that comes with the product slows down the spin fairly quickly. I wanted the wheel to spin…
This is a centerline marking scribe, similar in general function to many other centerline scribes. However, it is custom designed to fit the Pentel GraphGear 1000 (PG1019) 9mm mechanical pencil (7mm & 5mm would probably fit as well; other…
I have a craft project where I wanted to use a small quantity of paint, applied with a 4" / 10.16cm wide paint roller. I am only using a 4 oz. / 118 ml bottle of craft paint, so I don't want to waste a lot of the paint by using a larger,…
This is a replacement cover for the Marantec M3-631 garage door opener remote control that mounts outside the door. The original parts were not designed well and the plastic cover and housing gets brittle with age and exposure to the…
I use bar end extenders on my bicycle's straight handlebars. I wrap the extenders with padded tape (for cushioning). Recently on a ride, the compression fit end plugs that were provided with the extenders came loose and the tape started…
I needed to route an extension cord from an outlet in the middle of the ceiling in my garage, across the ceiling and down the wall (it is the closest outlet to the sprinkler controller that needs a power source). I wanted a flat extension…
This Arc Flipper Fidget Toy is a fun handheld game where an object (or objects) is flipped and travels back and forth in a mesmerizing pattern, across an arc rail, from one spring action flipper to the other. Besides being a ‘cat toy’ for…
I have Shimano disc brakes with BL-M315 brake levers. The levers were loose and rattling, metal on metal, every time I hit any bump. I designed these simple spacer shims to reduce the looseness and unwanted rattle. They fit the M315…
Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…
Halloween is just around the corner, and I wanted additional glow-in-the-dark jack-o-lantern/pumpkin decorations for the walls of a UV/black light carnival room that I help stage each year. There are seven different Jack-O-Lantern faces,…
UPDATE 2023-12-15: I found that the adhesive that I was using would fail in time, partially because the original Fixed Head had magnet compartments that were deeper than the magnets that I have, thus making them inset somewhat, and making…
This is a chain pull or fob for shop light fixtures that have a traditional pull chain. It is larger than most pulls, so that it is easier to grab while wearing gloves. It will fit on most light fixture pull chains that have an existing…
UPDATE: New versions of the Base, Floating Head & Fixed Head, which accommodate 6x3mm magnets , have been uploaded. The original design uses 5x3mm magnets . Note, I have not printed the 6x3mm version because I don't have any of those…
This is a remix of Maspat971's “Rounding Gauge” but which uses far less filament, while retaining all of the functionality of the original: I printed Maspat971's original design, not realizing how substantial that design is. The main body…
This is lite version of Liouma's squash ball foot. Various cutouts have been designed in to this remix to reduce filament use and print time. This foot uses standard 40mm dia. squash balls. It can be installed and locked into, or…
This is a height gauge foot/attachment for the iGaging IP54 EZ-Cal Digital caliper (or any other caliper with the blade dimensions of ~16 mm x 3.5 mm). The IP54 caliper uses a small stop screw on the back/end of the blade; these…
This is a reversible depth gauge foot for the iGaging IP54 EZ-Cal Digital caliper (or any other caliper with the blade dimensions of ~16 mm x 3.5 mm). It is reversible by rotating it 180 degrees -- the caliper will insert from either end…
This is a small handle that fits on the round, 3.0 mm tang of a hobby/miniature file. The tang inserts into the handle 53 mm. The handle provides a better grip and protects one's hand from the sharp end of the tang. I designed these…
This is a tipping backward falling target base, designed to be activated by the minimal force of a toy dart striking it. There are options that work with single or dual (2 glued together, for greater strength) Craft Sticks (6' x 3/4" or…
This is a hanging, antique style sconce or lantern designed to hang from a hook, and which will hold a 1.5" dia. LED votive flameless candle. It is designed to be used as a prop (candle wall sconces on a river boat -- see photos of actual…
This is a filter puller or remover that helps with removing a furnace/AC filter that is hard to get to because of tight tolerances in the filter housing. I have a Bryant brand AC/furnace with a side mounted access port to the filter. The…
The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…
Microsoft KC-0405 Digital Media Pro Keyboard (discontinued) back foot/elevator/riser. This is a replacement design that is more durable than the original foot. The keyboard is no longer produced, but mine still worked (except for the…
This is a bell shaped pull, cord end, or miniature ornament, designed to be attached to the end of festive string. It is small and prints quickly. I printed with a 2mm brim, inside and outside, just to make sure that these small pieces…
A friend has a house boat which has 3.5 inch diameter receiving holes/sockets on the deck where a winch is inserted. When the winch is not in use, the holes are exposed, leaving a chance that something might fall into the sockets (keys,…
UPDATE 2025-06-07: I noticed that some filament spools (Overture, etc.) have an open and ribbed ring around the center hole. I added a spacer that has two touch points to accommodate these types of spools. This is a very simple, quick…
UPDATED: for those wanting to get a jump on the 2022 holiday season :), I have included a 2022 version. These are "2020", "2021", "2022" & (no year) Happy Snowman Christmas holiday ornaments & gift boxes with a gift compartment. There are…
These two objects are fixed arms that replace the cell phone mount gooseneck that comes with the "Dakason LED Ring Light with tripod Stand and Phone Holder" so that the cell phone camera can be positioned better than you can with the…
This knob cap fits over the stock control knob on Ender 3D printers, and has a finger hole or indentation to allow the user to jog or spin the wheel with one finger. It has a knurled side surface for grip when making fine adjustments of…
These four object files are holders for 5 Pc. Set Up Gauges (a.k.a. height gages, measuring blocks, etc.), with the following standard sizes: 1/8", 3/16", 1/4", 3/8" & 1/2". The holders are free standing and peg board compatible (3"…
UPDATE 2025-08-08:m I uploaded version 3 models that print vertically. Both models are now oriented so that they can be printed with no supports. NOTE: The Trek/Bontrager IsoZone grips are notoriously prone to decomposing and…
UPDATED 2025-04-07: I made a hybrid of this design and the one listed below. The new design is the lightest of the three designs and incorporates positive elements of the other two. Here is the link: These are baskets/carriers/boxes for…
These are simple, small, easy to print letter/envelope openers with circle, heart & square shaped handles. At only 2mm thick, they use minimal filament, even when printed at 100% infill (2.44g, 2.34g, & 2.53g respectively). I printed mine…
Updated 12/30/21: I included a slightly trimmed down version where the back or hanging arms are flat instead of tapered. This should print a little faster and not have the layered 'steps' that are created by the horizontal tapering of the…
I purchased some “CHANCS Turntable Synchronous MotorTYC-50 110V 5-6 RPM motors” from Amaz…, and wanted a self-contained enclosure for the motors, which could then be mounted to various surfaces, to be used for INDOOR Halloween decorations…
This is a spring loaded, pivoting, punching caveman action figure. There are two main pieces, the top and the bottom, and four strengths of interchangeable springs. The springs provide a pivot point with snap-back action which allows the…
This is designed to mechanically produce a waving motion, driven by an electric motor. It is designed for a stage prop that has a cartoon figure in a window who is waving out the window. The design is for a specific purpose, but it could…
I wanted a small version of El_Matador08's "Christmas Tree Expanding Fidget Toy," which could fit in a small gift box. I removed sections until I had the desired dimensions. Then I stretched each segment to make them taller, consequently…
This is an updated version of a previous design of mine which reflects the year change, as well as a few other minor tweaks. I have also included a set of beveled edge ornaments, to go with the original rounded edge version. You print a…
UPDATE 2026-01-05: After playing the game with family members on New Year's Eve, I revised the game instructions to make them much easier to read, and 33% shorter. I also fixed a serious type-O, and modified the rules a bit to make them a…
This is a clamping, pivoting right angle bracket that attaches a 2 1/2" Loc-Line Vacuum Hose Adapter to a 1/2" diameter rod, dowel or shaft. Various power tools have capabilities to attach a 1/2" rod and position it so that with this…
This is an inexpensive visual center punch that lines up with measurement lines and makes it fairly easy to strike accurate, centered punches. It also has additional ruled posts that permit you to strike additional spaced punch marks with…
This is a toe clip adapter or mounting bracket that replaces the front reflectors on Rockbros K307PT Mountain Bike pedals, making it possible to install toe clips. It is durable and fits well. However, it does require you to drill two…
This design includes three sizes of connecting brackets for storage racks or shelves used in garages, kitchens, restaurants, storage rooms, etc., and which have metal frame tubes/pipes that are 1 inch (25.4mm) in diameter. These brackets…
This is a simple tool to stop the rotation of a Rain Bird AG-5 Maxi-Paw Impact Sprinkler while it is running/spraying water. It accomplishes this by holding in place the pivoting weighted arm (on the left side with the sprinkler spraying…
These are the Temple Fortress -- Toppers (Domes, Roofs & Spires) Building Blocks, which go with four other additional groups of blocks and pieces in this set, including the Basic Blocks. See below for the links for the other groups of…
This is a top mount shower glass hook that has a friction fit on 3/8" / ~9.5mm thick glass, with an 8mm dia. hook. It is designed to fit on the top of a frameless shower glass wall. It can hang clothes, shower equipment with 10mm or…
This is a simple screw-in plug that fits into the female end of a garden hose that has the U.S. standard .75"-11.5 NH thread. This is a very common thread size and fits on most hoses. Its purpose is to plug the end of a hose or other…
I noticed that some of the original blue flag bases have disappeared from my Castle Kingdom Lincoln Log sets, so I decided to make some replacements. These are the caps with a button on the top, which fit on the upright end of a Lincoln…
UDPATE (2025-01-30): After using my original design for a few years, I found that the handles for these tools are a bit too small (hard to hold), and too thin (not strong enough). I redesigned them and made an “XL” version with the…
This soap tray is designed to be adhered and removed from shower walls using two suction cup mounted hooks. It is light weight, prints on its back and requires no supports. This is a two mounting hook variation of a previous single hook…
UPDATE 2025-05-27: The initial dimensions were not correct for Box H, so that model was replaced with an updated version. Also, Box A-E was modified to provide better clearance between the game pieces and lid. That model was also…
This is a clip-on drawer label for most, if not all, Husky brand mobile workbenches and storage/tool chests, which are produced for, and sold through, "Home Depot" in the U.S.A. I don't know if these are available in other countries.…
I wanted to get some new pedals for my bike, and the ROCKBROS lightweight nylon pedals were fairly highly rated, but they do not accommodate toeclips. I like to ride with ½ toeclips. So, I made this adapter. It works well, and can be used…
This is a simple support bracket or column with a base/foot that has bottom-side tabs/posts that fit in the 'alternating brick' hole pattern venting used in the Phanteks XT Pro Ultra PC case. It is specifically used with an AMD brand…
These are the Temple Fortress -- Caps & Spacers Building Blocks, which go with four other additional groups of blocks and pieces in this set, including the Basic Blocks. See below for the links for the other groups of pieces. The Caps are…
These are the Temple Fortress -- Foundations Building Blocks, which go with four other additional groups of blocks and pieces in this set, including the Basic Blocks. See below for the links for the other groups of pieces. The Temple…
