Liczymy pasujące modele…
Print the test Piece → Measure it with your callipers → Input the measured results in the Google Sheet Calculator → Get the results from the sheet with calculated Shrinkage → Input in your slicer → Voilá, perfectly calibrated print's…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
Air Scoop – Fresh Air for Cars Without A/C Stay cool on warm drives without air conditioning. This Air Scoop mounts securely to your partially open window and channels fresh outside air directly towards the driver. It uses a cap that…
Remixes Available for other Food Dehydrators: Silvercrest 350W / Quigg 350W Food Dehydrator: https://www.printables.com/model/494734-2-spools-filament-dryer-for-silvercrestquigg MisterChef® Professional Food Dehydrator, 250W:…
There's a big gap between the poop chute and the interior volume wall. If you look from the side, you can directly see the electronics, meaning that hot air from the printing volume will go to the electronics and also cooling air from the…
I needed a place to hold a couple of toilet papers in the toilet and didn't wanted to screw it to the wall, so I designed this simple, minimalist and modular toilet paper dispenser/holder. Print a top & bottom pieces once and then print…
Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…
Original Model: https://makerworld.com/en/models/538757#profileId-455917 Modification: Extended the base and made a hook style to make sure the rear is supported and the front doesn't allow for the laptop to slide off…
3D scanned the Flysky Fs-i6 and created the handles to give it a wider feel. Feels like a Taranasis Qx7 in your hands. No Drilling or Gluing, just snaps in and stays put. https://youtu.be/0_VPp9_kHLE (Originally uploaded to Thingiverse by…
Protective pad for generic 2T (2000kg) hydraulic floor jack. Ideally print this in TPU 95A or softer. I personally printed with 5 walls and 70% infill (eSUN TPU 95A), but I reckon you could go a bit softer with settings or with softer…
I have 3 External 2.5" HDD (Western Digital) that are always laying around separated. I decided to make this holder that I can always have them 3 together. 2 HDD with dimensions 82 x 110 x 22 mm 1 HDD (middle) with dimensions 82 x 110 x…
A piece to keep your boxing gloves opened and breathing to avoid mould and bad smell. No supports needed. For an upgraded version, please considering using some cooling fans and this design:…
Intake Velocity Stacks for Honda MSX / Grom 125cc. This upgrade helps to allow to bring the most air possible to the intake with the least amount of turbulence. Together with the snorkel delete, this will improve the performance of the…
While printing technical materials the chamber temperature easily goes above 40/45degC, which is enough to dry some technical filaments (ABS, ASA, PETG, Silk PLA, etc), so instead of using an external filament dryer, why not use that heat…
My bike had some old pedals that had huge gaps and were very noisy. I disassembled them, got the shaft out, and redesigned from scratch the whole body of the pedals. I used one extra 608 bearing at the outer part for more support and…
Whether you want to raise your Anycubic to fit a bigger motherboard/PSU fan, to fit storage space beneath or just to fit in your space, these feet will raise your Anycubic by 65mm. It uses the standard rubber feet and screws (screw…
Simply choose the STL with the desired thickness, print and fix it in place with the correct sized screws. Let me know if you need a specific size that's not listed.
I love my Arc/EasyARC enclosure but one thing was breaking my nerves… The front door rattling while printing! Even though there's magnets on the door, the top would still vibrate and make some annoying rattling noises, so I designed and…
I bought a AMS unit for my P1P that has the ARC / EasyARC enclosure. I couldn't find any suitable, sturdy and good mount for the AMS that would still allow me to easily put/remove the top glass. So i designed this mount that bolts…
I printed Dragon R1 and really enjoyed. When it came down to the tires, I really didn't wanted to use TPU, as it's not so easy to print and anyway grip is not good. So I designed some tires in PLA and then you can just cut a Bike tube and…
Simple Halloween Teeth for cars split into bodies to allow for easy colouring
I have a P1P with the ARC enclosure, and I wanted a place to fit my twin set of Anycubic Air Purifiers to reduce the VOC levels while printing ABS/ASA, so I designed this raiser to allow fitting the air purifiers on top (for maximum…
I needed a gasoline funnel for my Mazda MX5. Most of the relatively big funnels are centered hole, but due to to the fuel door at the left, I could only use a very small funnel while refuelling the car. This would create a mess and would…
A plastic protection for the Roll bar of the Honda NC700x that I designed for a friend's bike. Obviously this is not intended to protect the bike, it's just a anti-scratch device for the roll bar when the bike falls to the side or there's…
I decided to design this door handle 100% compatible with ARC (Same dimensions), but with the logo of the Bambu. This can be printed in bi-colour for best looks. Spacing and dimensions of holes of the handle are 100% accurate with the ARC…
I needed a Toolbox for my Dremel and Accessories, to keep everything accessible and easy to store. No support needed. Hinges are printed in place and can be snapfitted, UUsed the Parametric model (…
I designed this to allow me to use quite inexpensive food dehydrators (bought this for 10€) as an effective filament dryer. This part, printed in PETG gets screwed directly to the base, then makes use of a 608 generic bearing to allow for…
I wanted somewhere to tidy up the space and find a place to put always the remotes (so I don't have to look for them every time) and also a place to rest my book so I designed this holder to it on my Ikea Friheten sofa. This holder will…
------- Purchase the complete model here: https://cults3d.com/en/3d-model/gadget/pioneer-djm-450-decksaver-dust-cover ------- Decksaver designed specifically for the Pioneer DJM 450 / DJM 250 mixer. It has three parts, allowing it to be…
I needed a Toolbox for my Soldering station tool and Accessories, to keep everything accessible and easy to store. No support needed. Hinges are printed in place and can be snap fitted, Used the Parametric model (…
I designed this to make the monitor and laptop power adaptor and whole cable management much cleaner on my IKEA Linnmon secretary. Inside the Power Adaptor guide, it fits my Samsung monitor and LeNovo laptop power adapter. Everything is…
Remotes holder for IKEA Friheten sofa and others. Solidworks projects included for easy remix
I bought a cheap Samsung monitor that didn't had a feet, so I designed this simple, ergonomic but strong stand that took minimal space on my desk. The stand is made of a couple different parts that allow it to have 7 different height…
I wanted to increase the height of my IKEA FRIHETEN sofa so the robot vacuum cleaner could fit beneath and vacuum. So I designed these simple feet that fit the image of the sofa and increase the height by 20mm. To give the same look as…
Vinyl record / LP Records holder, so I have a easy place to put the record while playing it. Solidworks is provided for easy remix.
I wanted a handy place to put my phone or tablet while playing or streaming, so I designed this. This piece just slides bellow the DJM mixer and holds the phone at a nice and convenient place so you can keep an eye on it. I uploaded two…
I needed some ventilations to some exterior boxes, but didn't wanted it to allow entering water, so I designed these ventilations/breather pieces. Here you will find two different designs, one to be fitted at the top, another one to be…
My Xiaomi Mi Stick was getting absolutely impossible to use. Constant freezes, restart, overall just terrible performance. I tried everything from factory reset, buying another one, deleting some apps but nothing fixed. Some days would…
20cm extension of the Ikea Lack series feet. It's press-fitted so you don't need to secure it with screws, it's tight enough to not create problems. On the base you have a screw, that you can print the second part to further increase the…
A Case for Hawkers Sunglasses with the logo on the cover. The case is fully 3d printed, prints in place and does not need any support. Original Model:…
This box is a remix from this: https://makerworld.com/en/models/1578496-storage-box-for-small-parts#profileId-1660948 The changes are that I made the storage tray taller to allow for stacking. You can stack as many trays as you want or…
I wanted to adapt a blower 100mm vent to a high aspect ratio nozzle that I could fit in my bed for cooling during the night, so I designed this exhaust nozzle. It features 65% cross sectional area to increase airflow and keep the…
Here is a lens cap that I designed for my Fisheye. Ideally print this in TPU so it's flexible and nice (I printed in eSun TPU 95A) but you can get away with any other filament. Solidworks project is included, to allow you to very easily…
Designed this for my kitchen sink. Included you can get the Solidworks and STEP files to allow easy remix and editing the dimensions for your sink size.
I wanted to gain space in my desk by removing the bulky original monitor stand. There was no available 3d printable solution for this that would allow me to fully control height, rotation and tilt of the monitor, so I decided to design my…
I was missing a Boot Rubber Stopper on my MX5 NB, and because of that the boot was not sitting straight. I jumped into CAD and designed. I printed in TPU 95A, with 2 walls and 8% infil and it feels good. You can also use 90A or 85A. There…
Wanted to display my longboard somewhere in the room. So I designed this holder that hook onto the heating radiator and hold it in place. Solidworks project included for easy remix/modification.
Sign diameter: 210mm I had to design this sign to avoid random people coming into my opened garden. It's written in Dutch & French but I included the Solidworks Projecct file so you can easily write the message you want. Its designed in…
I don't know how, but my girlfriend always manages to magically spill all the shampoos and everything inside our bag. So I decided to design and print this travel safety cap to prevent it from opening.
My home has curtain holders rail type, but my curtains are ring type, so I created these rail to hook type converters to be able to use my curtains. Normally the hook/ring curtains are held with 6-8 rings while the rail type curtains are…
Adapter to use 35mm Universal Vacuum hoses on a Black+Decker BHFEV Handheld Vacuum Cleaner If you need the vacuum hose you can get it here: https://s.click.aliexpress.com/e/_c3tXkNjn
A simple parasol pole cover/cap for 44mm diameter poles to protect from rain/bugs. It has a hole to allow locking it in place.
Simple Vacuum Cleaner Holder/Mount/Support I'm using it with my handheld Black n Decker vacuum cleaner but I assume this should be compatible with other brands as well. I glue the part to the surface using double sided tape. Since the…
To wszystkie aktualnie dostępne wyniki.
