Liczymy pasujące modele…
Here is a single print that measures inside and outside angles to within +/- 1 degree. It is one print with no support needed. The pointer hole provided me a medium press fit on the pin. This allowed the pointer to turn,, stay in place,…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
You can now customize text on any flat or curved surface in the latest Prusa slicer, although it is still pre-formal release. It does work well. So, add your telephone, name, dog's name, and/or your phone number to the tag. For detailed…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
A simple cross that prints quickly and can be worn with the addition of a small chain. See the other cross I offered that prints in spiral mode with two pieces that mate together. A US dollar can be rolled up and placed within for…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
A simple group of cookie cutters to support Thanksgiving and experience in the kitchen with the kids. Offered: Turkey, Acorn, Maple Leaf, and Squirrel. Probably a good idea to hand wash them and not put them into the dishwasher.
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Adjust the four arms to the desired shape, and tighten the nuts to lock them in place. They’re often used as layouts for stairs and window sills or patterns in tile. Measurements are provided in metric and inches. The knob threads into a…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
Here are two fidgets. One is a half heart, and the other is a full heart. These are smaller, more delicate versions of my earlier fidget. There are two designs. One is a half ❤. The other is a full heart. The original design concept for…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
This simple design holds a wide range of wires to be soldered. It comes without needing to adjust the arm position or the locking mechanism. Each pair of fingers adjusts automatically to the diameter of the wire. The photos show two wire…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
This card is similar to others I have published, except it is a Thank You note. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be unique to the recipient. The hinge needs to be…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
This card prints altogether in a single print. The hinge has about 0.5mm clearance and works perfectly. It can be used as a birthday card, thank you card, greeting card, etc. There is an inside pocket for a check, cash, trading card ….…
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
This is great while working at your desk measuring small things that you need to draw and print. The top and bottom “teeth” measure inside and outside dimensions. The pointy extension on the right end measures hole depth. The hash marks…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
The fan is mounted on a ball and compression fitting to allow adjustment of fan direction. vertically and horizontally. I used an adjustable voltage supply set to 3 volts to limit the current to 2 amps. The air velocity is reasonably…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This heart shaped box is a single print with built-in hinge that is described by a tutorial by Clockspring 3d under “hinges and hearts in Fusion 3d”. I added the ring posts. I also made a 25% larger one.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Copied the 3D Printy's base and spring. Made a simple two-finger welcome for placement on the car's dash, refrigerator door, etc. The 6 x 3 mm magnets are inserted into the base to secure the assembly to a metal surface. Let me know if…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
The square rods press fit into the corner retainers quite tightly. You can make it as tall as any tomato plant I have seen. The press fit clearance between mating surfaces is 0.13 mm. If there is a small foot along the bottom of the rods,…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This card is similar to others I have published, except it is plain, without an embedded message, and without a pocket within. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
I modified my previous design so that all parts are printed. However, without the skate bearing, the arm and bird move only vertically and not in a circle. Two arms and a connector are provided so that the bird’s location is adjusted…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
To try to come up with a design for the mechanical counter competition, I came across the classic mechanical counter design used in automobile odometers and gas meters before electronics took over the market. You might want to incorporate…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
This is significantly larger than the flush finger pull I also offered in this competition. This is about 6" in diameter. The center hardware: ¼" x 1-¼" Hex Head Bolt with Fender-Washer, Lock-Washer, and two Nuts. The base has printed…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This fidget compresses with your finger or thumb and returns to the extended position with two opposing 20 mm magnets glued within. A pin on the inner hex mates with a slot on the outer hex to prevent the parts from inadvertently…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This protractor is simply a larger version of my previous offering. It just fits on a Prusa Mini. The angle measurement hash marks increased from every two to every single degree. Added are metric and UNC bolt size checks and a metric…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
This water wheel can be a static decoration within the fish tank or it can be very dynamic when you put it in the bathtub, run water on it, and watch it spin. If you put the water wheel on top of the fish tank and provide water to the…
Wydruk około 6,37 €–7,79 € nettoWstępna wycena jednego wariantu
The amount of filament on the spool is difficult to determine as it is used up. This tool allows you to estimate how much is on the spool and decide whether or not to proceed, change the spool, or set your alarm to check the print. Put a…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
These templates provide writing guides for addressing envelopes and writing checks for anyone with eyesight impairment or shakey hands.
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
This metric bolt/nut gauge lets you check the diameter and thread for metric bolts and nuts between 3 mm and 10 mm in diameter. Similar commercial gages I have found typically do not include a 3 mm bolt and nut capability. I often use 3…
Wydruk około 8,11 €–9,92 € nettoWstępna wycena jednego wariantu
“Evil Eye glance is believed to have the ability to cause injury or death to those on whom it falls; pregnant women, children, and animals are thought to be particularly susceptible. Belief in the evil eye is ancient and ubiquitous; it…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
The “Single Finger Wave” has been downloaded more than any other of my prints, so I added an LED to the waving finger and light diffusers, front and back. The front diffuser (.4 mm thick) is printed just below the hand outline. The other…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Two sliders can be attached to any length 5/8" to ¾" thick wood beam to allow drawing or cutting a circle. If you prefer not to use a wood scrap, you can print the beam consisting of multiple beam extensions that press fit together. The…
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
I put the Ford logo on key caps 0 to 9. Am planning to add some other logos. Reversed print color to see difference. If you would like a particular logo on on the number key decals, let me know with a comment. Placed logo on an angle to…
Wydruk około 1,72 €–2,11 € nettoWstępna wycena jednego wariantu
This card prints altogether. The hinge has about 0.5mm clearance and works nicely. The LED and battery are held in place with a built-in spring design. The LED battery lasts a month or more. The LEDs come pre-soldered with a resistor…
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Save a trip to post office and weigh your envelopes and Christmas cards at home. This design has the 1 & 2 ounce weights engraved. However, I would suggest that you make up a test articles to verify the accuracy. The beauty of this design…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
These keycaps provide Chevrolet logo and are numbered 0-9. There is a color change break in the slicing when done on a Mini. There are some other keycaps I make for this competition.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
The Fibonacci sequence is a mathematical sequence that appears in many natural patterns, and art works that are pleasing to the eye. Each square side dimension is the sum of the previous two sides. A quarter circle is drawn in each square…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Either side knob controls X and Y axes. The support bed is bent slightly to fit over two knobs. Rolling the simulated food from top to bottom is easy. The challenge is to keep the ball moving and not become constipated for even a second.…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
This optical illusion makes the brain perceive the rings rotate upon each other (nutate) when turned with your finger. I first saw this on Dave Garroway's TV Morning Show a few decades past. The center column is designed for holding by…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Simple Elvis 45 adapter.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
A fairly simple vase. But it is not watertight. Just printed for display.
Wydruk około 4,03 €–4,92 € nettoWstępna wycena jednego wariantu
This round finger flush knob is for cabinet and doors that can be opened/closed with your finger. You can install it in panels greater than 13mm by drilling out a 1-½" diameter hole 12 mm deep. I was able to do that in a scrap 2 x 4. By…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
The cylindrical pill container end cap/hex-nut has a left-hand thread that few people undo successfully. Most try to unscrew the end nut assuming it is a right-hand thread. Of 20 people who tried to open this puzzle, only two were…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
The 10 precent who figured this out are MD's. Everyone else gave up or over-torqued the tree and broke it. You can put a $1 - $100 bill in the trunk and offer it as a gift or prize. The buttons on the side of the trunk are simply…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
The pen and pencil holder is connected to the pegboard with 1/4 inch pins that slip into the pegboard. It provides a convenient location to store and find your writing utensils in the shop. This unit is more substantial than the one I…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
The card is held together with a pin that press fits into the hinges. The birthday is for a fifteen year old, which is the cube root of the number on the front.
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
This heart box is made of a base, cover and ring that locks the top and bottom together. It says “My Valentine. You unlocked my heart .” The design concept for this is provided by V Murano on his Desktop Makes U-Tube. I modified his…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
This opens to reveal a statement that will delight the wearer. She may likely show-off the charm to her girl friends. Or display it to some male requesting her number. The pin is retained in the bracket through a press fit. The bracket is…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This simple tool prevents the towel from falling off your dishwasher handle while drying.
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
In the days BC (Before Computers), we kept track of contacts' information on a large Rolodex card file. I was surprised to find that Rolodex card files are still available at Amazon and local stationary stores. I copied the two rail card…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
For someone who has poor eyesight, this check writing guide assists in locating where to write out the check. Place the template on top of the check and the openings in the template define where to write out the info. A note-writing…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
The bird hangs on a string or in this case a thread from extruding new filament from the Prusa Mini. You could use thread in place of this filament, The base is weighted with 2" x 1/8" flat washers (8 ea). There is a skate bearing in the…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
These two molds make an oversize LEGO brick with 8 bumps. Sloping sides facilitate removing the casting from the mold. The flat mold places an indentation into the LAGO for the bumps. As seen in the photo, wet sand is needed so the…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu
This bird swings around at about 1 revolution in 6 seconds. It’s guaranteed to work till the cat sees it and pounces. The arm is quite flexible, so the bird oscillates up and down 1 to 2“while attempting to escape from its predator. I…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
The LED is powered by a CR2032 battery within the tree. The tree's 0.4 mm back is printed with the tree's outline. The tree's diffused front is press-fit onto the tree's outline using tabs that seem to hold reasonably well. A disc is…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Here is an offering showing how bevel gears work. They change the rotating shaft angle by 90 degrees. This finger fidget allows one input (your thimb) to drive the three other bevel gears. The gears were easily downloaded to Fusion 360…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena jednego wariantu
The kids might greatly enjoy having this self-propelled boat in the bath. They will learn how the angled blades push the boat (or pull it backward if the rubber band is twisted the wrong way.) It employs a twisted 12-16" rubber band to…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
This caliper maintains a ratio of ~1:1.62, to provide a position for the focal point for your art work and is at the golden ratio. If you review the photos of the scale and caliber, you will see that one dimension is 4". 4 x 1.62 = 6.48,…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
The Geneva drive or Maltese cross is a mechanism that translates a continuous rotation into intermittent rotation. The classic use of the design was in the movie projector. Each frame is advanced quickly and then retained in that position…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
This light switch Valet is for a dual switch installation. It provides your keys and wallet behind the switch plate, preferably next to the door where the cars are parked. If requested, I will make a Valet for a single switch panel. It…
Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu
The bar opens at five is good news for anyone needing a drink right away. The battery operated clock mechanism (Clock Mechanism Kit, Quartz Clock Movement with 3 movements is available from Amazon for under $9.79. My AMS is not working,…
Wydruk około 6,71 €–8,20 € nettoWstępna wycena jednego wariantu
When someone points an accusatory finger at the accused, do the three fingers in the fist in fact point at the real culprit? Seems a good comment for a self-centered relative or acquaintance. This file can be used as a bookmark. Printed…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
A simple pen/pencil holder that keeps them a bit organized on your desk. This one has fluted sides. Another one has smooth sides.
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
Theses rings (ring) press fit on top of the Whirl-A-Gig provided by my previous offering. I first saw these on Dave Garaway's popular 7 AM TV show c 1956, channel 4. Your eyes are likely to see the rings roll around each other by magic.…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
A simple vase mode vase that is printed in three colors, kindness of Prusa’s slicer that makes color change easy and predictable.
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
We are taught from an early age that threads are right-handed (righty-tighty / lefty-loosey). Few people (15%) attempt to open this by turning the end hex nut clockwise (righty-loosey). The opposite end has an embedded loose item that…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
The rocket is propelled skyward with a blast of compressed air that you provide by stomping on the cylinder. Kinda fun. But kids under 16 need adult supervision. You need to low-velocity practice the stomp so that your foot goes straight…
Wydruk około 15,08 €–18,43 € nettoWstępna wycena jednego wariantu
This tag is 1-¾" wide, for medium size dogs. You print your telephone number on a piece of paper and place it within the tag so that the person finding the animal can call you. The front and back of the tag snap together. I used a…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Your phone can be mounted in front of the driver to provide driving directions. I found the iPhone maps more reliable than the cars' maps. I mounted it easily in an older Ford Explorer and in a Lexus ES350. It needs a ledge about 1 - 1-½"…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
I enjoy working with gears and put two spur gears together with a ratchet and a finger ring to make this fidget. The larger gear rotates the smaller gear at 5X faster. The finger ring is a press fit into the base. Using the Fusion 360…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Wind up the propeller to see how far the toy boat will travel in your bathtub or pool. As shown in one photo, it almost made it to the end of the junior Olympic pool and won the competition at the Univ of North Georgia. The 12" rubber…
Wydruk około 6,68 €–8,16 € nettoWstępna wycena jednego wariantu
Art students use the 10 different size Micro pens to draw in black ink on white paper. When using all these different-size micro pens, I wasted too much time looking for the desired pen size on the end caps, which display the size. The…
Wydruk około 5,61 €–6,86 € nettoWstępna wycena jednego wariantu
This truck needs no support. It has a hole in the top for the wire hook. If ambitious, you can paint the lettering and/or the USPS Logo. The logo and small print are better suited for printing with an AMS, if you have one.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
In the days BC (Before Computers), we kept track of contacts' information on a large Rolodex card file. I was surprised to find that Rolodex card files are still available at Amazon and local stationary stores. The filament swatches are…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
These keycaps provide a vehicle logo and are numbered 0-9. There is a color change break in the slicing when done on a Mini. There are some other keycaps I make for this competition. The Cherry center post does not extend to be flush with…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Although not compatible with a jar, this is compatible with a container (spaghetti box). So, hopefully this is allowed to compete. The Ronzoni Spaghetti #8 recipe calls for 1/4 box serving, Historically, I would dispense way more than ¼…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
The flashing LED is powered by a CR2032 disc battery. The battery is retained with a disc that press-fits into the battery cavity. The LED flashes multiple colors. There are two designs: One with a pin on the back for wearing and one…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Multilayered tessellated wall hanging.
Wydruk około 3,20 €–3,92 € nettoWstępna wycena jednego wariantu
I was curious if a fidget would have less friction without the bearings (as provided by a previous design). This design simply uses a v shape to keep the inner and ourter races together. It seems to have lower friction than the bearing…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Provide a hand-written note on the right interior. It can be mailed in a thick, padded envelope. A single print provides the two sides and hinge. The hinge seems to work nicely. The cookie cutter is removed easily. Overall dimensions:…
Wydruk około 7,54 €–9,22 € nettoWstępna wycena jednego wariantu
This card has a hinge. Place both parts of the card down on a flat surface with the hinges mating. Then put the hinge pin through the hinges. It has a press fit, so should not fall out. To mod the card for your grad, print the STLs…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Glaucoma is present in many older persons. The treatment often includes taking two eye drops daily, one twice a day and one once a day. This eyedrop holder provides a reminder for having taken the drops or not. At the conclusion of a even…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Rather than holding this fidget with thumb and forefinger, this fidget is held on just the forefinger. The design is based on adding three poles to a bearing. The three weights are 3/8 nuts. It took a few minutes of turning the outer ring…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
My Ender 3 requires 4-5 knob inputs to change nozzle temperature. Some printer knobs provide very course inputs, where setting a value is difficult because of over/undershooting desired set point. To provide a gadget that addresses both…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
The Printables provided STL was modified by adding a mounting slot to its back. A finger slides into the slot and the vent fingers go around the car's ventilator fin. A rectangular sleeve around the vent fingers tightens the fingers on…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
I designed and printed the concentric hexagonal cylinders (based on Vladimir Murano's video on his Desktop Makes channel) and then tried printing gears to rotate the cylinders in vase mode. I thought I would have to make a smaller…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This fan has driven by a tiny DC motor, which includes a high ratio gearbox. A 3v power supply or two-AA battery pack can drive it. The mechanism is a classic rotary to linear design, modified to oscillate the fan back and forth around a…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
The functional Square Gears can be added to your CAP so that you become a true Gear Head. Observer s of these gears often mention that they’ve never seen Square Gears function before. The gears are retained on their post using two small…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
The four square gears are mounted on a plate and driven by a DC motor. A single 2032 coin 3V battery provides the power for the motor. C clips retain the gears on their shafts. Rather than need a lot of support for the base and motor…
These two helix bevel gears provide an interesting fidget.
The fan blades are based on the Fibonacci curve, which is used extensively throughout nature to provide improved efficiency. Artist also used the Fibonacci curve to locate the point of interest in a painting. This design is an improvement…
In treating pre-cancerous skin lesions, dermatologists often freeze and destroy the abnormal cells. A blister usually forms the day after the procedure. If the blister breaks, clean it daily and protect it with petroleum jelly. I am sure…
This Winged Foot is available with and without the text. Support is needed. A second color PLA enhances model, though you can also paint the highlights. My initial design provided raised lines for the foot and feathers. They were .4 mm…
The Fibonacci curve is used extensively in nature to provide improved efficiency. The three blade fan turns with wind from any direction. A pointed pin within the hub provides a very low friction bearing. The fan is secured to the clog…
The 1-Cylinder-Bades Assembly and 2-bottom are separated from the 3-base using two opposing 150 pound magnets. Lower rated magnets, such as 50 or 100 pound magnets probably could be used. Don't allow children to play with these strong…
To wszystkie aktualnie dostępne wyniki.
