Liczymy pasujące modele…
The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
If you'd like an upgrade, or would like to support me, there's now a new version of this model in my store. It's slimmer, easier to print, and includes a panic button and immobilizer slot. Thanks! I've included a picture of the fob that…
A snap-on cap for Clik valves. Print Instructions: Print in the original orientation of the file. 0.4 mm nozzle recommended. 0.2 or less layer height. With Tool - Prints on its side with no supports. If using a 0.6 nozzle, print…
Add a touch of springtime to your home with this hatching chick! This is designed to minimize the need for supports. The only supports you need are for the bottom of the shell.
Enjoy this cute Easter decoration. Have fun!
Uses the original QR skewer that comes with the tray on the stand. You can also use m6 bolt. 3 holes for axles - 20mm, 15mm, 12mm. Slots fit pliers and cutters nicely. Print 3 walls, 20% infill. PETG is oil resistant, probably good. I…
Satisfyingly snaps together. Smoothly spins! Customize your colors! Decorate your hoodie strings and have something to fidget with! Show off your love for analog music. The hole in the center is so you can push a piece of raw filament in…
Slides easily up and down the hoodie strings with a roomy 6mm hole. Pull your string tight and flick the rocket. Frayed hoodie strings look like rocket exhaust. The rocket nozzle will sit over and cover the knot in your hoodie string.
These are designed to fit the 1/10 Toyota Comp Crawler Body by jasonboz56 on MakerWorld ( 1/10 Toyota comp Crawler body - Free 3D Print Model - MakerWorld ) to the Traxxas TRX4 chassis. These parts replace the original bumper mounts on…
Express your outdoor hobbies with these beads! Best printed multicolor, but a white paint marker also works great. Print back down, no supports needed. If printing multicolor, either set a pause at the last couple layers to swap filament,…
Mount your Volt 2 under your desk with this simple model that's light on filament! Uses 2 strips of 3M double sided foam mounting tape to mount. To mount, attach tape to the clips, hold them to the sides of the interface, then place where…
Print vertically(tall way) standing on end so it doesn't break on layer lines when the pump is clipped on. Print in PETG 100% infill. The pictured print was using fuzzy skin for the texture. ABS GF, PETG CF also work great and give it a…
Original model is less than 200mm long. It has holes in the back for finishing nails to hang it. Scale as you like to make it a size that fits your space! This model‘s dimenions are based on an XL frame. If you want a specific frame or…
Replacement for Fox crush washer. Easy to lose when swapping shocks. Print PETG, 100% infill. 0.2mm layer height or less. Smaller nozzle is better to get the details, 0.4mm works fine. The reference picture is printed with 0.6 nozzle at…
An easy way to replace a broken or lost cover or customize your bike with some cool colors. I've included the SolidWorks file if you want to make changes. Otherwise, there are options for whatever cable routing your bike runs in the .stl…
Designed to float or use a suction cup to attach to the glass. Print settings: Material - PETG is recommended, although I'm sure PLA works fine. I haven't tested PLA. Strength - 3 walls, 5 top and bottom layers, and 5% lightning infill.…
Print on the side. Designed to use minimal material.
Print on its back. To print multicolor, paint by elevation in your slicer. 0.2 mm nozzle will look nicer, but they'll print fine with 0.4 mm. Maximum 0.2 mm layer height.
Use at your own risk, this is a prototype. It will not hold up to long term use. I did get more miles than I expected out of mine, but unless you print it out of an exotic engineering filament or modify the design to work for metal, this…
Have fun! Easy and quick multicolor prints. They'd also be fun to paint.
Replacement for yakima part #8881401. Uses two m6 bolts to mount. Recommend printing ABS or PETG. Print 100% infill so it's still solid if it wears away. Model in picture was printed with a .6mm nozzle .3mm layer height with PETG-CF.
This thing works great. This is a remix of an excellent design. Holds Dr Squatch bar perfectly. Feels solid on the wall. Drains well and easy to clean. I mounted it with two classic command strips. You can see the pull tabs out the bottom…
Hardware needed: 4x M2.5x7 screws 4x M2.5 slim nuts See my profile and my store for variations of this key that support the use of the wireless fob module.
Fits just like the original risers. Fits all versions of Seaoura SR-628. I use them on the 56w model and the 20w model. There are 3 versions included here. All versions install just like the original and use the same hardware. Original…
This screws into the original sliding rails. This is more secure and more adjustable that the original seaoura kit. You have the option to hang with one cable or two as seen in the pictures. The part is designed so you can thread the…
Print upside down. If your printer is good at overhangs, you can print it with no supports.
Ditch the inner lid from a mason jar. Sandwich the lip on top of the pot between these two discs and put your plant in it! This keeps the pot(and plant) secure and makes it easy to move plants from growing emersed in an aquarium to a jar…
This is designed specifically for the Bostitch Inpower Eco Desktop Stapler . The upper part of the stapler snaps into this new base just like the original. It uses the strike plate from the original base. Staples are still easily…
To wszystkie aktualnie dostępne wyniki.
