Liczymy pasujące modele…
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
Introduction I recently received a Stedi ST3K 7.5" light bar from my brother, who had ordered the incorrect model for his Tenere motorbike. I designed custom mounts for my 411 Royal Enfield Himalayan to fit the light bar in the space…
Simple 2-part sodastream bottle stand that assembles for use, and disassembles afterwards in seconds for space-saving flat storage in a drawer (or similar). Printing: Material - anything you like really - not important. Silk PLA pictured…
Introduction I designed a planter basket that attaches to the edge of an aquarium, providing a unique and thriving environment for aquatic plants. The basket is designed to hold clay balls that support a variety of plant species, which…
Owners of the wonderful Royal Enfield Himalayan 411cc adventure motorcycle often fit DNA (washable) air filters to their bikes. One of the options from DNA Filters is a plain steel plate that holds the filter in place. In terms of ‘clean’…
Background I've been using automotive axle/chassis stands to balance my motorbike wheels (with the axle simply resting on two stands). I thought I'd design a cradle that sat on top of my (SuperCheap Auto) axle/chassis stands that would…
My (outsourced) grandson has a decades-old Tomy model railway. Some of the pieces of track are showing their age with quite a few failures with the male and female track connectors (in particular). I measured up a few good remaining…
I recently installed an external CCTV camera under a gutter (Eufy 2c Pro in this case). Despite its semi-protected position, I designed a weather cover/hood to provide more protection from the elements. I've created two versions. A…
I wanted to replace the static XL Spool Holders with a holder that incorporates some bearings. It's useful for both holding a spool directly, or when feeding filament directly from my filament dryer. The design uses two 608 bearings that…
My wife wanted a paint palette in the form of a colour wheel. I designed and printed this for her. She finds it quite useful. As you can see it gets a bit of use ;-) It's a simple print that can be scaled to any size you desire. The same…
A ceramics friend was using a cut-up PET bottle with rough biro markings on it as his height guide for projects on the wheel (see pic). I said I'd make him something a bit more bespoke and easier to use…… This improved height guide…
Quick Background: I purchased a 12 volt cigarette style socket from AmazonBay (?) for accessory power on my Royal Enfield Himalayan. I found a good design on thingiverse (referenced) to mount it - but I thought I could fit it a bit better…
A pottery friend receives orders from time to time with specific finished sizes. He needs to know by how much to oversize the initial clay objects so that they shrink to the correct size after the various kiln firings. I designed and…
My daughter wanted some Parallettes to use in her home gym. I designed these to accommodate a Pine Furniture Leg I bought from Bunnings (Australian hardware store) as the bar between the end supports. I cut the embedded screw off the leg…
I have an old gas-fired central heating system in my roof space that I no longer use. The dampers on the ceiling vents do not seal very well and I can feel cold air coming from them occasionally. I designed up a cover/cap to help seal the…
I purchased some BarkBuster plastics for my motorbike handlebars a year or two ago and noticed that they only supplied clamps for one of the two mounting points (each). I had a slow weekend recently and copied the original clamps in…
I have a double GPO/power point on an external wall in a courtyard at our home. Even though it's designed to be weatherproof, it's still VERY exposed to the sun and rain. In the interests of longevity, as well as protecting anything…
A pottery friend wanted to make holders for his kiln firing cones rather than purchasing them. I modelled up a mould/stamp/negative of firing cone holders that hold the cones at the correct angle for use in kiln firings when you make them…
I had a wireless Tyre Pressure Monitoring System (TPMS) mounted on my motorbike handlebars. During one of the many times I fell off whilst out adventure riding recently, the mounting clamp for the TPMS became damaged beyond repair. The…
We buy our dishwashing powder in bulk and transfer it to our point-of-use container from time to time. The transfer of powder from a large container to a smaller one can be frustrating at times. I made a simple funnel to fit into our…
The tensioning handle on my Hills Retractable Clothesline failed after a few years of use. Whilst spare parts are available for just about every other part of the clotheslines, I could not find a replacement tensioning handle for love nor…
I had a sliding door guide fail after a couple of decades of use. I had no idea how or where to get a replacement. I gathered together all the broken bits I could find, measured them, and made a replacement model for 3D printing. The…
I occasionally wash my OzArmour bee suits. I remove the hat “spreader bar” to prevent damage before putting the suit in the washing machine. I have been known to lose the spreader bar from time to time before putting it back in the suit.…
I have a solar-powered wireless Eufy camera that I wanted to mount in a convenient location on a shade sail post in my front yard. The post is 4.5 inches (114.3mm) in diameter. I made this clamp to take the standard Eufy camera mount and…
We purchase our cleaning products in bulk and then transfer them to their point-of-use containers when we need them. Products such as hair conditioner (and some shampoos) can be frustrating and messy to transfer. I designed this simple…
Daughter's dog-washing trailer has a weird piece of 40x40 SHS steel sticking out both sides for no apparent reason - other than to damage people's shins who walk by a bit too close… After banging my shin on the end of the steel a few…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…
I have a Codan Autotune HF Antenna mounted on the back of my 4WD. When I don't have the whip mounted, the mounting thread is exposed to potential knocks/bumps/damage. I made up this simple threaded cap to go over the mounting thread to…
I made this soap mould holder/rotator for my darling's soap-making activities. It holds the wood/silicone soap mould at any angle you like for pouring/shaping of the soap. It's quite sturdy. Ignore the progressive red soap scrapers in the…
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement end-cap style stand that…
I bought some economical pin punches a couple of years ago for motorbike maintenance. The moment I opened the packaging, the case they came in sprung open and would not stay shut again again (see last pic). This meant I had an untidy…
I was sent a Solidteknics Modula diamond-faced finger-style knife sharpener I ordered some time ago. You can attach it to a chopping board with a screw to hold it in place - but I wanted to mount it on it's own mount so that it would be…
My darling is making pendants with polymer clay and then sealing them into pendants with UV-cured resin. She encountered problems with the pendants resting on a surface and ruining the first-cured-side. I designed a couple of simple…
I have a UPS in my home office (just across from my bedroom) and the green status LED's shine very brightly indeed. I haven't figured out a way to dim them. At night they cast a significant amount of green light into my bedroom - which is…
To wszystkie aktualnie dostępne wyniki.
