Liczymy pasujące modele…
This project implements fully-parametric generators for bricks/plates/tiles, modern liftarms/beams, slopes/roof pieces, and more, creating parts compatible with LEGO, Tyco, Mega-Blok, and other directly-related construction toys. In…
The v2 model was composed of over 100 individual pieces, which slicers don't handle so well. This one has all of those pieces recombined into a single, hollow structure. It's still not properly manifold, but it behaves fine in slic3r.…
This is a remix of LtDan's printable trumpet, with just a few modifications. I've reworked the tops of the valves to give them screw-on caps, which are themselves designed to be printed in two parts (brass/gold, and white), so that you…
This is a remix of lzyperfection's Captain America shield, wherein I loaded the file into Blender, scaled up to about 19 cm in diameter, then split the model into separate parts, one model file for each color on the standard shield. The…
This is a revision of ModelStation's Space Shuttle model, with most of the major components fixed to be properly manifold and normals corrected (according to both Blender and Slic3r) where needed. I also took the time to un-triangulate…
This is a remix of UnimatrixRed's Lightsaber model, wherein I've added some basic LED lighting to the crystals. I've also revised the clamp lever model to make it easier to print, and have altered the nameplate on the display base to be…
This is your basic centrifugal "blower" fan, using the motor from an old PC fan. The blades' center hole is 39.35mm in diameter, sized to press-fit over the motor/hub from a Coolmax 8015M12S ND1 fan (after removing the blades and sanding…
Just a simple set of T handles for smaller Allen wrenches (fits M1.5, M2, M2.5, and M3). Some are a bit tight, but that's intentional. Push your wrench in from the bottom, twisting as needed to "drill" through the tight plastic, and…
This is Calamari's model, but with some changes done to make the model easily printable without supports. I started with Calamari's model because it has such nice detail in most of the model. In particular, each of the four minarets has…
This Thing is a modified version of jsirgado's caster, with wheels of my own design, to fit my Broyhill model 41119 office chair (well, that's the model number used by "True Innovations", the supplier; it's actually a "Wal*Mart fall-apart…
I needed an all-plastic scraper for removing parts from my printbed, and for scraping/brushing plastic bits away after printing without risking damaging the bed surface, and found Andycap's “universal scraper”. After a short while mine…
This Thing is more or less mistertech's litter scoop, but about 25% bigger, with thicker bottom/sides/back, with holes added to the back and sides, making it similar to the last commercial scoop I used. Cheap litter tends to get pasty…
This tool was featured in Transformers: Prime as one of Cybertron's ancient relics that were deposited on Earth sometime in the past by Alpha Trion, with the intent that it/they be later found and used by the Autobots to help in their war…
This is a basic case/enclosure for BigTreeTech/BIQU LPC176x-based SKR controller board (v1.1 through v1.4, at least), with the ever-popular RepRap Discount Full-Graphic 12864 LCD mounted up front. It is basically a mash-up of three…
This project is meant to serve as a "standard library" of parts and materials which can be linked into some other project. I use it extensively in my own projects -- when I need a motor, for example, or a piece of 2020, a lead screw, a…
As a couple of people there mentioned, it's missing some files (namely the handle, the ball joint and the main 4-way block), and there were a few minor mistakes that made the printed model a bit loose. I've created new versions of the…
This project provides about a dozen variants of C64/C128 cartridge cases. These models were built using adjustable, high-detail, non-destructive modeling for everything. It is therefore quite easy to make new variations on these basic…
This is a remix of Landru's “Companion Cube Upgrade”, altered so that you can print it in its proper colors on any printer by just switching filaments. It's also scaled-up considerably - this version is 8 cm on a side. The sides and…
This is a remix of Flyer 1903 by alienkim. I simply split the model into four parts, so that the wings could be printed in white, the framework in brown, and the motor/chains/propellers in some sort of dark metal color. After you print…
This Thing is a small revision of kozinc's Mew Mew desk tidy, in that I've added two 100 mm tall variants - one regular (same as all the others), and one double capacity (derived from two side-by-side singles). I've also added little…
This is a simple, basic, generic spool holder. Not too fancy, but it does the job :-) I designed the base, uprights, and axle in Blender. The geared bearing is this variant of emmett's well-known Thing,…
This is a remix of Whitehawk2000's X/Z ends for leadscrews on the Prusa i3, plus a new X carriage made from scratch, and a new Y carriage remixed from molak34's well-tested design, all designed to mount their bearings with proper clamps…
Making the assumption that there will have some amount of weight on it, I've made a very short version of salzig's LACK table stacker model, thickened the walls a bit, resized the leg "receiver" hole a bit and beveled the edge to account…
If you've played Minetest (the open source alternative to Minecraft), you've probably seen my Pipeworks mod in use on some servers. If not, you've probably at least seen someone mention it in a chat somewhere. What, you never heard of it?…
This is a simple three-part strain relief clip for IDC 10-pin (2x5) female connectors. I bought some IDC-10's on Aliexpress to use to build long LCD cables, and the strain relief clips that came with them were the wrong size (probably…
This is a case designed to hold a GBS-8200 video board and my Commodore 128 RGBI-to-RGBA converter board. The bottom half features cooling vents, holes for the two video connectors and the power connector, and extra holes for a secondary…
Here is a minor remix of Fichthorn's Spirit of St. Louis. I've split the plate into parts for three colors - white for the fuselage, wings, tail, and struts, silver for the front part of the plane and propeller, and black for the wheels…
This project is just a simple two-part buffing/polishing wheel, onto which you just attach some kind of cloth or chamois with a rubber band. An M5 bolt is used as the shaft, just chuck it into your drill and start polishing. The top piece…
While I was working on the previous RAMLink model, I went digging through my junk box again, and like a treasure hunter who just found “X marks the spot”, I found an old CMD HD SCSI controller. At some point, I must have assumed it was no…
And here is yet ANOTHER fidget spinner. This time, I've made it use US pennies at the ends, and like the other one, a 625ZZ bearing in the middle. Like the other one, the ends have a "windowed" design, with snap-in retaining rings to hold…
This Thing is a modified version of mangtronix'sX/Z leveling tool. I imported the model into blender, cleaned up most of the triangulated faces, then re-cut both the "claw" and the "L" to be suitable for 8mm smooth rods. The new cuts have…
This Thing is just a simple notched hinge, with four 3.5 mm mounting holes in the base and one in the arm. By notched, I mean that the arm has detents (two, 90° apart) that catch on a springy "cam", to make the hinge lock in either the…
Just a simple two-part vibration damper foot to put on the end of a piece of 2020 aluminum extrusion. Just what it says on the tin. :-) They raise whatever they're supporting by 20 to 25 mm, depending on how heavy that thing is and how…
This is a set of parts to turn a Rubbermaid FG7M7400CHILI 21-Cup Food Container into a drybox to fit a normal 20-21 cm diameter spool, up to 7.5 cm wide. I made it to store my spool of Atomic Carbon Fibre Nuclear Nylon separately from the…
This is a simple tube-type filament guide designed to clip onto the edge of my Prusa i3's frame, to direct the filament from a spool at the front, to the side and up the back to my extruder motor. There is no mounting hole on the part,…
This project is just what it says on the tin - a printable enclosure/case for the CMD FD-2000 and 4000 floppy drives for the Commodore 64/128. Unlike my other CMD cases, I didn't model this one to replace a lost case, but rather to have…
This is a simple three-part mount for my old magnifier desk lamp. The end of the lamp's arm has a little cylindrical post that would normally be inserted into a base that's basically a modified C-clamp, however that clamp does not fit…
This project is a remix of FoxBlox's "Mini Commodore SX-64" model, with many changes and tweaks. This one is much larger than the original, making it easily printable with common 0.4 mm nozzles, and I have hollowed-out the interior of the…
This Thing is a replacement for the main gearbox body for the trunk lid pull-down assembly in my 1992 Cadillac deVille, reverse-engineered from the original part (as mine broke in several places, due to age and excessive mechanical…
I used blender to split the original model so that base and the Aleph are each a separate color/material, flattened the base, and scaled the whole thing up so that the model stands just a hair shy of 110 mm tall. It was a bit over 130 mm…
Here is yet another fidget spinner. This one uses six US nickels for the weights, and a 625ZZ bearing in the center. The ends have a "windowed" design, with snap-in retaining rings to hold the coins and bearing. The central cap needs…
This is a simple snap-on grille for a Gridseed 5-chip "orb" miner. Protect your fingers from those spinning razors that Innosilicon calls "fans" :P Print instructions Licence: Creative Commons - Attribution - Non-Commercial - Share Alike…
I've been on a tear lately restoring my retrocomputing stuff to good condition, and relevant to this website, making new enclosures/cases since I've also been either acquiring hardware here and there (since I sold a lot of my stuff a long…
Customized version of Mother Of All Brackets, created with Thigiverse's customizer ( https://www.thingiverse.com/apps/customizer/run?thing\_id=166045) Nothing fancy, but it does the job. Print instructions Licence: Creative Commons -…
To wszystkie aktualnie dostępne wyniki.
