Liczymy pasujące modele…
Needed to solder some LEDs and didn't have three hands so I sketched this up in F360, works great! Made a three pin, a 90° three pin, and a four pin. Update 2024-01-04 Added version 2 of the 3pin jig with a shorter length Added version 2…
This is a magnetically attached vent deflector suitable for ceiling mounting, too. Magnets are 8x3 neodymium, this is the pack I bought (200 for $13.99) https://www.amazon.com/gp/product/B0CCXH6W5Q I used PETG since it will have hot air…
2025-10-16 If you don't have (or like or use) heatset inserts, there is a version that will take an M3 x 10mm screw that does NOT need the insert. ------------------------------------ This is a camera mount for the Anycubic Kobra 3. I…
I remixed this because I wanted room for the components between LEDs on the matrix. This is set for a 16x16 grid https://www.amazon.com/dp/B088BTYJH6 or https://www.aliexpress.us/item/2255800358269772.html Print Settings Printer Brand:…
2026-02-01 Added a new v2 version to use less filament and with 55mm and 60mm versions. This is my take on an RFID tag holder. I designed this for use with my Anycubic ACE Pro, but it should work for any Multi Material Unit that has RFID…
Needed to run some Cat 6 and ran out of zip tie clips so I designed this. The Cat 6 I have is 6mm diameter, but this should flex enough to go a little bigger. It's designed to take a slightly smaller cable, too. I recommend printing on…
BOM These items can be sourced on Amazon.com or your local supplier for probably less than McMaster-Carr Qty Description McMaster-Carr Part # 6 608-2RS Skate Bearing 5972K222 6 Brass Tapered Heat-Set Insert 94180A333 6 M3 x 16 Steel…
Didn't want to buy more D20 mounting boxes, this won't fit all cameras, but does fit the RLC-842A and RLC-422. If you need different mounting holes, let me know I'm happy to move them. I also included both the STEP and the F360 files…
This is a magnetically attached vent deflector suitable for ceiling mounting, too. Magnets are 8x3 neodymium, this is the pack I bought (200 for $13.99) https://www.amazon.com/gp/product/B0CCXH6W5Q I used PETG since it will have hot air…
This is a standard camera mount (¼-20) designed to print on its side for lateral strength. I printed this with .12 layer height. It's very strong, when I printed my first one standing up, even a little bit of torque would snap the shaft,…
I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection,…
The box will work for pretty much any ESP8266 project, it's designed around the ElectroCookie 1/4 solderable prototype board. The board mounts to the box with M2x5 screws The magnets are sized for 2mmx5mm Neodymium. Make sure you get the…
I created this box with Fusion 360 for my DigQuad v3 controllers Step files included (because I always appreciate when people leave them) Mounting holes are sized for M2x5 Depending on how well your printer bridges, you may or may not…
Not technically a remix since I completely redesigned this using Fusion360. Although to be fair, it was fully inspired by https://www.thingiverse.com/thing:1656880 , so I'll give remix credit. I wanted something I could use to support the…
This is the case I designed for the QwiicBus I2C Extender endpoint with the VL53L0X Time of Flight (ToF) sensor. This was designed for the side distance sensor for ResinChem Tech's Parking Assist project. I built the original Parking…
This is the case for an ESPHome based presense and environmental sensor. The code for ESPHome and the HomeAssistant cards is on GitHub https://github.com/withanhdammit/ESPHome-Presence . This project uses a 24GHz mmWave sensor ( LD2410C )…
This is the Arizona Cardinals logo in various formats. The logo is copyrighted and unless you get explicit permission from the Arizona Cardinals, this cannot be used for commercial use.
This is the case I designed for ResinChem Tech's Parking Assist project. This will hold the ½ size solderable breadboard and all components, including the QwiicBus I2C Extender. There's an extra lid if you're not using the QwiicBus…
To wszystkie aktualnie dostępne wyniki.
