Liczymy pasujące modele…
Stryfe Talon Adapter v2 Description : A new version of my Stryfe Talon Adapter, completely from scratch. Changes from V1: * A more crisp design that was actually done in Fusion, not in a slicer (yes, v1 was 100% done in a slicer) *…
A NEW VERSION IS AVAILABLE! https://www.printables.com/model/1739852-stryfe-talon-adapter-v2 Stryfe Talon Adapter: ------------------------------------------------------------------------------- * Based on "Talon mag adapter body…
Description : I wanted an accuracy device for my Stryfe, and I needed to decrease the FPS a bit. I tried some PCARs and even a NStrike lug BCAR, but was not thrilled with any of the results. That made me think of other ways to mount it…
Description : This set contains magazine adapters that allow you to use Talon, Angled Talon, or Nightingale magazines with your stryfe or other NStrike magazine blaster. A short dart pusher is still required to properly fire the darts.…
Description It is a portable way to store Silly Shells! This box is a remix of the gridfinity 5x4 rugged case by Akio-42. For compatibility with Silly Shells, I made it a lot taller (a bit over 80mm) and I added an image to the lid to…
Description : A fiber optic sight for nerf/airsoft that has a similar profile to a red dot. Two heights are included. Heights measured from the top of the picatinny rail to the base of the lens. 1. Short: 21mm 2. Tall: 25.5mm Materials :…
Description : Based on a 30mm buffer tube. This part is only meant for toys like airsoft and nerf blasters. Testing was done using the buffer tube I created as well as a few airsoft and worker buffer tubes. If you need a picatinny buffer…
NStrike Barrel Adapter Description : This attachment allows the use of many muzzle devices on your Stryfe - or most anything else that has a NStrike lug. I have successfully used everything in the pictures with a Stryfe using this…
Description : PDW stock with an NStrike adapter designed specifically to fit the silhouette of the Dart Zone Vector Pro. It takes a couple of springs and some screws to help with the polish and to make it easy to install and uninstall.…
I got tired of Nerf stocks that were just a bit too short, so I created an extender. Every one of these will add 30mm to the length of your stock. Credit goes to these two designs: https://www.thingiverse.com/thing:5467370 by Foamsnake…
https://makerworld.com/en/models/2312189-mod3-vfg-pack-v1-2#profileId-2524290 This is a shortcut for you on MOD3 VFG V1.2 by Qwerm, if you want the picatinny version. Just open the project and print and it will include the fuzzy skin…
Just a simple drop-in replacement for the stock rev trigger.
Description : Based on the mil-spec size carbine length - 7.25in (184.15mm), but I added extra positions and narrowed the adjustment channel to work with Worker stock parts. This part is only meant for toys like airsoft and nerf blasters.…
Description : This model allows the user to change the stock magazine switcher on the Adventure Force Axis Switch Pro with that is more user friendly. It takes away the need to pull in the handle before the switch can occur and it gives a…
Description: This is a gridfinity-compatible silly shell tray! It pairs perfectly with the silly shell storage box I created.…
I got bored one day and a bit annoyed at the lack of Dart Zone Vector Pro parts available, so I decided to make a new magazine catch. There are two versions here - the only difference is the texture on the back of the latch. Both have the…
Description : This is a slip-on muzzle for the Adventure Force Axis Switch Pro blaster that includes some lower picatinny for a foregrip. To really make it work, you should shorten the magazine switcher. I have a model out there for that…
I needed to connect 2 Silly SCAR female attachments together, so I created this to do just that.
Description : Put this adapter between your blaster and stock so that you can add 60mm spaced fidlocks for your holser. Materials : 2x M5 Fidlock Bolts 2x M4 Nut 2x M4x30mm Socket Cap Head Screws 2x M4x10mm Socket Cap Head Screws 3x…
Nerf Stampede Picatinny Rails Description : Picatinny adapters for a foregrip, optic, and side rails on the Nerf Stampede Materials : 3x M3 washer 5x M2.6x16mm self-tapping screws Printer Settings : At least 4 walls, 25% gyroid infill…
Stryfoid Short Dart Pushers These are short dart pushers I created for the Nerf Stryfe and Nerf Demolisher - with and without a jam reducer. Pushers : 1) Stryfoid Jam Reducer Short Dart: A pusher that should work with most flywheel cages…
Description : This modification replaces the original stock on the Adventure Force Boxer Pro with a 6 slot picatinny rail. Materials : 2x M3x8 Screws 2x M3x16 Screws 3x M3 Nuts (Suggested) 2x M4x16 Screws 2x M4 Nuts (Suggested) Printer…
Description : A simple replacement group for the Nerf Mirage that includes a T-pull to make it easier to use. You can still use the sights with this mod. Materials : None required Instructions : It is very important to have these parts…
Description : A new NStrike stock adapter for my collapsible stock, with a form factor for the Adventure Force Axis Switch Pro, though it will work on most NStrike blasters. Materials : 4x M3x 6mm Machine Screws 2x 0.16x0.2x0.79 -…
Description : Nerf Demolisher 2-in-1 Rear Picatinny Rail Materials : 1x M3 Nut 1x M3x16mm Pan Head Screw 1x M3x25mm Screw Printing Instructions : Use supports necessary. I recommend PETG with 5 walls and 25% gyroid infill, but PLA should…
Description : This muzzle is a drop-in replacement for the existing one to make it stick out of the shroud a bit more. It is advised to print this in bright orange. Printer Settings : 2-4 walls, PETG or PLA, 20% gyroid infill. Use…
Description : A few battery doors for the Dart Zone Vector Pro, including one with cutouts for a battery indicator and switch. Do any wiring completely at your own risk. Materials : Retention Screw - I prefer a metal thumb screw.…
Description : I got tired of not being able to use the 3rd party mega missiles I bought for blasters like the Demolisher 2-in-1 and Fortnite GL, because they were too tight around the post. To fix that, I created these stretchers to leave…
Nerf Stryfe Rail Attachment Points Nerf Stryfe Rail Attachment Points Description: Description : Attachment points for Nerf Stryfe rails. You can do both or just one. Get the rails for this kit from this model:…
Xtra Atrox Lower Receiver with added grip, flywheel covers, and full trigger guard
Description : A remixed battery doors for the Adventure Force Axis Switch Pro including cutouts for a battery indicator and switch. Do any wiring completely at your own risk. Remix :…
This is a simple one - just a battery door that allows for the use of thumbscrews. There is almost nothing to the back - just a bit of a guide to help you use it. Print it with 2-3 walls and 15% infill and you should be fine. As usual,…
Description: It was bugging me that darts would go everywhere when testing with a chronograph, so I was thinking of ways to fix that. I came up with a simple drawstring utility bag, like you would use for sporting equipment. Fire darts…
Description : Low profile fiber optic sights for nerf/airsoft. They can either be friction fit or held with a screw. This set includes: 44mm - Great for Nightingale 1.0 90mm 125mm - Great for Nightingale 2.0 Split (front and rear are…
This is an easy way I found to store my cat's toys so that they cannot pull them out on their own.
Description : A NStrike stock buffer tube adapter with a form factor for the Adventure Force Axis Switch Pro, though it will work on most NStrike blasters. Buffer Tube Adjustable Stock…
Description : Nightingale 1.0 Optics Plates for RMR and RMSC Materials (per plate) : 1 M3x4mm Screw 1 M3x8mm Screw Printing Instructions :I recommend PETG with 4 walls and at least 20% gyroid infill, but PLA should be fine. Ideally, print…
To wszystkie aktualnie dostępne wyniki.
