Liczymy pasujące modele…
This is a 3D model of the MG996R servo. It's purpose is to help you design servo brackets and other parts that require a standard sized servo. * Just import this model into your 3D design software and now you have an accurate…
This phone holder fits securely in that V-shaped slot on the ford transit's dash and is big enough to hold most phones. Needs to be printed with supports. Just lay the model flat in cura and just turn on supports for touching build plate,…
This is a Toughbuilt clip designed to fit onto/over a Molle system. It also happens to fit over my belt quite well so it can also be used to attach your ToughBuilt pouch to your belt (although I do recommend you use ToughBuilt's ClipTech…
This is a remix of the Electrical Tape Belt/MOLLE Holder by danielrama30 on Thingiverse . I remixed it, so I could hang it off my tool pouch. Update 08/09/26: Made an upgraded version of the Tape Holder for 3M electrical tape. This way it…
This is a partial case for the 10.1 inch HDMI LCD Touch Screen by Waveshare. (There is only the front part of the case. I did not create the back because I did not need it). Print the front case, Place the screen inside it, and screw the…
Fully Functional &3D Printable Tank Tracks!!!! Great for a variety of projects/robots! Assembled Dimensions: ~2ft x 1ft x 1ft Shaft is a 8mm (5/16") rod Print Settings: 10 Walls 30% infill ( You can cheat on the idle rollers, idle frame,…
This is a quick 3D model of the DS5160ssg 60Kg Digital Servo. It's purpose is to help you design servo brackets and other parts that require a big 60kg servo. * Just import this model into your 3D design software and now you have an…
This is a model of the circular servo horn for the large 60/80/150kg servos (DS5160/DS5180). This is to be used as an aid for designing and is not meant to be used as an actual servo arm/horn.
This is an animatronic neck mechanism that you bolt to a robot head to make it move up, down, left, right, tilt left, and tilt right. Update (03/17/21): I have added the Neck Base - Removable Plate Update part. This piece allows you to…
This is the X-1 Stinger. A 5W burning laser gun inspired by isaac879's project: https://github.com/isaac879/2.5W-laser-gun Why is it called the X-1 Stinger? It's called that because if you get hit by the laser at close range, it stings!…
Designed the frames to be linkable to make a large tank setup. Frames are braced together using 2020 extrusion & M3x8mm screws & T-nuts (Some plastic welding between frames may be necessary) I have mine braced with 2020 extrusion and the…
Since my original tool bag broke, and I can't find replacement parts for it and instead of making them, I decided this was a perfect excuse to get the StackTech. So this is my mod of the ToughBuilt StackTech compact tool box . I made a…
This fixture can be placed on your desk or mounted on a wall and can be lit up by placing LED strips inside the fixture and bringing the according power to it. I used a dimmable 3K 7W 5V 1.4A COB style LED Strip Light Assembly : Print the…
This is Niles the animatronic parrot. He is controlled by Pololu's micro Maestro (6-channel) servo board, and uses 4 micro servos to move him. Leg Top is OPTIONAL. I accidentally added it. It was intended for a MK 2 prototype but you can…
This is a model of the smaller U-Bracket that came with my 150kg servo (This is the bracket that mounts to the backside of the servo and holds it in place). This is the U-Bracket for the large servos (60-150kg) If you're looking the…
INTRO Meet the DEFENDER; A tanked UGV. Measuring: 890x740x660mm ( LxWxH ), & powered by 2 BLDC drills; This completely 3D printed ( with the exception of the 2040 extrusions for structural support ) UGV can handle whatever you throw at…
I wanted to keep my Fluke meter in my ToughBuilt pouch, but I was afraid the leads would get snagged on something because they hang all loose, so I designed this clamp that fits over the Fluke T5 meter, and it keeps the leads organized/in…
This is Hercules, a robotic arm I built. And yes, It can successfully lift a bottle of beer ;) Hercules the Robot Arm in Action: Materials I used: It utilizes five 12V 150kg/cm 270 degree servos I got from AliExpress ( Make sure the…
Fits 10x10x10mm element cubes you can find online.
A lockout device for a 120V or 347V toggle switch. Print in PETG/PLA at a 100% infill.
This is a rocker switch replacement for an old lazy boy recliner controller. I printed it in PLA (100% infill with supports)
This is Egor. A full sized, retro futuristic inspired robot! Note: This is an early release of Egor's parts. All the parts are here except for: back panel, drive motor brackets, and grippers; as they are still in development. I'm just…
Made the lock ring/hole bigger and made the cover a bit beefier. Note: In Cura, you may get a model error. The part will still print fine. I was able to print it (I used PETG at 10% infill), and it came out just fine. I used it to lock…
Fang is a fully 3D printable animatronic dragon. These are the files for Fang's head. You will see a file called All Skull Parts V2.Zip you should download this as it includes all the skull parts, some helpful pictures, and tells you…
Looking for a decora switch lockout? Look no further. I printed mine using the “normal” setting in Cura (layer height 0.2mm) using a 0.4mm nozzle. Print with a minimum of 10% infill. No supports needed.
This is a simple but dimensionally accurate model of a 3" lazy Susan bearing. The purpose of this model is to aid you in your designing process if you happen to use this style bearing and need to incorporate it into your design.
This hologram projector is the closest thing to a real one that you can get (on a low budget of course). This uses a convex lens (a magnifying glass) to reflect the light from your phone and makes it look like it's trapped it in mid air.…
Fang is a fully 3D printable animatronic dragon. These are the files for Fang's wings. The file Wings MK 1.zip contains all the printable parts, the assembly picture, and the editable files for google sketchup. You will need x2 of…
This is a clip that perfectly holds an Extech Plug tester/transmitter for CB10. Once the clip grabs the tester, it won't let go until you push one of the ends/grips back. These clips can be screw mounted, tied to a pouch, or hang from a…
A 7" Screen Holder so you can add an on board screen to your Cooler Master Haf XB Case. Tutorial can be found here: Tutorial for built in screen
This is a basic model of an Octagon Junction Box that I designed using measurements based off a real octagon box. I needed to fit an octagon box in a project I was designing, so I quickly designed the octagon box in order to get the right…
This is a "stencil" of a 7" screen (155mm x 89mm) This can be used to help you mark up a project if you need to cut out a slot for a 7" screen. Just place the printed stl on your project, take out a pencil, and trace the interior square…
This is a simple tool designed to “run” nuts up/down a length of ready rod (threaded rod). Just attach it to the chuck off your drill and off you go. Works the best with a couple of elastic bands wrapped around it so it can use the…
I designed this retro styled terminal to house my mini PC, 13" ips screen, and 80% keyboard. Screen Dimensions: (325x205x20mm) Keyboard Dimensions: (290x105x~30mm) Mini PC Dimensions: (180x180x40mm)
This is a replacement washer for the FATMAX 4-In-1 Mobile Workstation. This will allow the workstation to slide open.
This is a part for my custom A.I system/Central Command Hub V.3. These parts are a USB-Aux Port/Socket, and a Wire Feed Socket (to run spare/temporary wires through). I figured I'd upload these parts separate in case anyone needs…
The "Sergey V.3.Zip" contains everything that is need to build/upgrade the new and improved Sergey. It also contains the complete audio file (Named: "Story V.5") for the routine, along with sperate voice clips (plus some extra), and sound…
Printed this model because I was tired of my trunk opening or alarm going off whenever a key on my key chain would press up against one of the buttons. This mod has a hole so I can lock the car but don't have to worry about other buttons…
This is V.2 of my C.C.H (Central Command Hub). It's basically a cyberdeck with A.I capabilities. The onboard computer is a Raspberry pi and the onboard A.I is a Movi Shield. Update: 4/22/21 C.C.H (V.2).zip is now available. This contains…
S.E.R.G.E.Y folder contains everything from the 3D printed parts to the code. S.E.R.G.E.Y is a 3D printable robot soldier that is able to execute any command you give him. He is powered by an Arduino and a MOVI Shield. For more…
Whether you need them or not, they're here. Enjoy. These are gas tags which I designed, printed, and used. The Sketchup file ( Gas Tags.skp ) is included in case you want to make modifications or create a new tag. Naming: (V.2) versions…
Designed for 21x30cm and 15x20cm posters and secured to wall using 3M poster tabs. Risk of Rain 2 Wall Sticker WarHammer Wall Sticker Doom Wall Sticker Metroid Wall Sticker Assembly: The poster slides into the 0.5mm recessed slot of the…
This is V.3 of the Central Command Hub. The C.C.H (Central Command Hub) is an Arduino powered A.I system that can do a variety of things. Basically anything you program it to do. In this upgrade, the Arduino has teamed up with a Raspberry…
These are the parts need to create Wallace, an animatronic alien creature. I recommend printing multiple copies as they are very useful. No support is need for these parts. Link to Wallace's Instructables tutorial:…
This is my Server Rack (or 'Central Command Hub' as I call it). It's basically NexGen3D's Micro Rack system, but with custom drawers and front/back panels to suit my needs.
To wszystkie aktualnie dostępne wyniki.
