Liczymy pasujące modele…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
These are mainly for use with the lithophanes available on Gadunky.com (but work on anything that will fit in them). They hold the lithophane at an 80° angle for best viewing(the flat section with the curve should be facing the back).…
A can Koozie for a 500ml Monster Energy(or same sized cans). A full can should slide in with a slight push and stay in there pretty securely until empty. This is much stronger than my previous version:…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
Custom lithophane stand included. This was a test using LuBan instead of my usual applications. It needs work. Software used: Photoshop and LuBan Dimensions: 135xx 133mm x 3.2mm(3.52mm with frame). Print settings and information:…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer and S3D. Dimensions: 176mm x 105mm x 5.5mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a very large and…
Star Wars: The Rise of Skywalker Custom lithophane stand included. Software used: Machine Learning (various GitHub based systems/scripts), Photoshop, Blender, Meshmixer and S3D. Dimensions: 172mm x 142mm x 6mm. Print settings and…
A mini floppy disk for your A500 Mini. I designed this to be printable and look great with a standard FDM printer using a standard 0.4mm nozzle(Prusa, Ender etc). But I've included a lot of detail(for such a simple model) that will really…
A can Koozie for 500ml Monster Energy(or same sized cans). A full can should slide gently into the koozie when dropped in, while an empty can should hold in the koozie until pulled out. When empty the Koozie is relatively strong, but…
Designed to be printed in vase mode using a 1mm nozzle @ 0.8mm layer height as well as using a regular 0.4mm nozzle. I've added a back to the sleeve with a hex pattern to increase strength and stability while only using a small amount of…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 176mm x 164mm x 6mm (6.92 x 6.46 x 0.24 inches). Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 171mm x 119mm x 6mm (6.73 x 4.67 x 0.24 inches) Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a…
Just a blank makers coin I made in Fusion 360 that you can use as a base for your own design. Import into tinkercad.com if you don't have any 3D package yourself and you can reshape or add text and other design elements. Print…
An updated version of my older poster lithophane( https://www.thingiverse.com/thing:3095701 ) Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer and S3D. Dimensions: 117.5mm x 172mm x 6mm. Print settings and…
I designed this to replace the Apple case logo on the old iBook G3 laptops from 1999/2000(they fall off and get lost very easily after all these years). It can be printed in resin or fdm. I was going to print the final part in resin, but…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 160mm x 92mm x 5.60mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a large and detailed stl…
Custom lithophane stand included. Lithophane created by request for members of gadunky.com I'll post pics when I get around to printing this one. Software used: Photoshop, Blender, Maya, Meshmixer and S3D. Dimensions: 171mm x 110mm x 6mm.…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 171mm x 99mm x 6mm (6.75 x 3.88 x 0.24 inches) Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a…
A good bit of work was done in Photoshop to prep the image and then on to Luban for the lithophane creation. The frame is custom and added once everything else is ready to print. There is a version for both FDM and Resin printers The stl…
Custom lithophane stand included. Lithophane created by request for members of gadunky.com I'll post pics when I get around to printing this one. Software used: Photoshop, Blender, Maya, Meshmixer and S3D. Dimensions: 171.5mm x 99.2mm x…
This is a simple 2 piece stand for the A500 Mini. Print the 2 parts with 100% infill to make sure there's a little bit of weight to them. 0.2mm layer height works well, but pretty much any height should be fine for this. This was printed…
This is a stylised 3D map of Ireland. It can be resized to whatever size you need and printed on either a Resin or FDM 3D Printer. It’s more suited to Resin printing, but a well tuned FDM 3D printer will certainly get the job done. Check…
The original artwork was in bad shape, so it was painstakingly restored to allow the creation of a detailed lithophane. There is a version for both FDM and Resin printers The stl is very detailed and might take a while to slice on older…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 132mm x 160mm x 6mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a large and detailed stl…
Custom lithophane stand included. I'll post pics when I get around to printing this one. Software used: Photoshop, Blender, Maya, Meshmixer and S3D. Dimensions: 171mm x 99mm x 6mm. Print settings and information:…
---------------------------------- 18th July 2023 Update: The latest version of the GKTwo firmware (and latest machines shipping) now have a build height of 250mm instead of the 245mm. So you will need to drop the build plate by 5mm to…
Custom lithophane stand included. I used machine learning to increase the original poster detail, then imported into Photoshop to remove the text and enhance further. I'll post pics when I get around to printing this one. If you just want…
Update - 13th October 2020: Still have this running on my K40 over 3 years later and its working better than the original part. The pulley idler on my K40's X axis had worn away quite a bit and the belt was popping off every few jobs. I…
Custom lithophane stand included. Software used: Photoshop, Luban, Meshmixer and S3D. Dimensions: 160mm x 142mm x 6mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a large and detailed stl…
Another blank makers coin I made in Fusion 360 that you can use as a base for your own design. Import into tinkercad.com if you don't have any 3D package yourself and you can reshape or add text and other design elements.…
Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything…
Back cover for the Amiga CD32. Print instructions 0.1mm - 0.2mm works well. 3-5 walls/shells and 100% infill for strong part.
I wanted a tighter fit on my own A1200 as when I printed the original part in Formfutura White ABSpro it fit ok, but there was a bit of movement and rattle. Perhaps there is some shrinkage on the ABS that causes this, if printing with PLA…
Unframed Version Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 180mm x 90mm x 3.5mm. Note: This is a large and detailed stl file and may put some systems/slicers under pressure. It slices best in Cura 3.6+ or S3D. Check…
Using this in a retro project and sharing here for those that want it. It'll probably need a bit of editing to work in a real console.
Custom lithophane stand included. Lithophane created by request for members of gadunky.com I'll post pics when I get around to printing this one. Software used: Photoshop, Blender, Maya, Meshmixer and S3D. Dimensions: 143mm x 172mm x 6mm.…
Custom lithophane stand included. Lithophane created by request for members of gadunky.com Software used: Photoshop, Luban, Meshmixer and S3D. Dimensions: 160mm x 142mm x 6mm. Print settings and information:…
Litho Boots Small and simple "boots" to hold up a lithophane. These are designed to be used with 6mm thick lithophanes from https://www.gadunky.com/ (well, the frames are 6mm, and these just clip on). The short end is meant to stick out…
Custom lithophane stand included. I'll post pics when I get around to printing this one. Software used: Photoshop, Blender, Maya, Meshmixer and S3D. Dimensions: 171mm x 99mm x 6mm. Print settings and information:…
149mm x 146mm x 3.3mm (6.4mm with frame). Software used: Photoshop, Blender, Meshmixer, S3D to add the frame. Some settings and info on my site(vital if slicing in S3D): https://www.gadunky.com/litho-print-settings/ If you want the…
Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything…
I picked up a Sony PVM-20M2MDE that had some external damage to one corner. It was missing one of the pull bars, so I designed up something to attach to the monitor so it looks a bit more balanced when I finished with the other repairs.…
I separated the button from the original file by 10P6 and placed it for easier FDM printing. It's still going to need a lot of supports, but it should be easier to get a successful print from this. Print instructions Print Settings Rafts:…
A simple thing to tidy and help secure the CF IDE adapter under the TF328 (if that's where you want to place it). Prints in about 6-12 mins depending on your printer and settings. 0.2mm layer height works well with 100 percent infill.…
A work in progress back cover for the Amiga CD32 TF328 Kipper2k v6 Exp adapter. It works as it is now, but needs more attention to really make it perfect. Print instructions Can be printed in any resolution really, but 0.2 seems like a…
I designed this to replace the light covers on an old cooker/hob fume extractor. It's a Philips branded extractor but seems to be pretty generic and these should fit Philips, Whirlpool, Elica, Bauknecht, Firenzi and Ignis. I've reinforced…
A good bit of work was done in Photoshop to prep the image and then on to Luban for the lithophane creation. The frame is custom and added once everything else is ready to print. This needs to be printed on a resin printer as its a bit…
The full sized, full resolution lithophane(framed and unframed) is available on my site for those that want it: https://www.gadunky.com/product/simonthesorcerer/ Check out more on my site: https://www.gadunky.com/ Print Settings Printer:…
This is a mount/adapter to allow the use of the fantastic IRobertI Ultimaker 2/2+ low friction spool holder on the Trinus 3D printer. You need to build the spool holder exactly as IRobertI has it setup, apart from the mount section.…
To wszystkie aktualnie dostępne wyniki.
