Liczymy pasujące modele…
About: The modular construction allows you to adjust the greenhouse to your needs (instructions with dimensions at the end of the text for the greenhouse shown). The combination of wood and 3D printed parts makes this possible. The length…
If you like photography and 3D printing, you will accumulate several SD cards over time. I designed the Flip & Clip so that the SD cards can be stored neatly. The system consists of a case with an elegant design and card holders. These…
About: When I got into 3D printing in 2019, the models were ASAP. ASAP = As Simple As Possible. The old AA battery holder originates from this time. This principle has not necessarily changed but I gave myself the challenge to use even…
I created cup coasters in a variety of designs. There is an optional holder to match. For the different designs you can look at the photos. I hope you like them and that they enhance your workplace a bit :D Happy printing and stay tuned…
You are on the road and have a snoring bed neighbor who cuts down half the forest again? Then the iPlugs are just right for you. Because you need a good and cheap noise protection. With the case you can transport your earplugs safely and…
A clean and aesthetic solution to store your pens. Since it is so simple there is little to say about it:P The pen holder is part of the Office Collection from KMS:…
This adjustable Spoolholder allows you to use every common spool on the market. You can adjust the width of the spool, by sliding the brackets on the Rail. The bearings assure a smooth filament inwind from the role. What you need for 1…
About: The SD-Card Server Rack is designed to store multiple cards within easy reach. It holds a total of 6 cards. When removing the card you have a gripper, which facilitates the handling. In addition, the indicator arrow always helps…
The angle is stabilized by the guide in the profile and is fixed with M6 countersunk screws. Is a favorable alternative to the metal version. Suitable For this a printable slot nut to insert into the profile:…
Empty Spool and just a little bit of Filament left?! So keep reading ;D What do we need? Empty Spools Some leftover Filament for the railing 3D Printed Parts (MMU2´s or Singleextruder) Some leftover screws (M3x17) and a screwdriver (that…
About the HIVE After many hours of modeling and especially printing. I finally present to you the HIVE system from KMS. Inspired by the bee itself, so bee flexible use the HIVE ! The system has two main components: The honeycomb (HC)…
There are already many simple Nozzleboxes out there and since I now have several Nozzles, I was looking for a solution. Since I love modeling in Fusion 360, I designed a new elegant box inspired by the E3D v6 design (…
About: The Festo fitting is screwed into a threaded insert. This model uses M5 inserts from Ruthex (other inserts are also possible). The core hole diameter is 6.4mm and the depth of the hole is 9.5 mm. If you need a different core hole,…
If you like to cook, you probably use spices. Whether you're a professional or an amateur in the kitchen, you use spices to make your food very tasty. Maybe you only have 10 spices, but you can also have 20. It does not matter because…
Simple do not disturb sign to hang outside of the door!
This design is made for Dia. 8mm. The magnet is a tight fit and can be secured with some extra clue.
You can equip this name tag as you wish. The dovetail prevents the letters from falling out. Ideal for visitors or workshop participants. Yours K ERLE M AKER S PACE PS: Feel free to support my work by liking or leaving a comment. Updates…
For the construction of my enclosure, I designed 3d printable sliding blocks. Why are these special, you ask? Quite simply, you can also insert the slot nuts afterwards. Because of the flexible pin the sliding block stays in place. The…
(This is a work in progress please see instructions here:) https://www.printables.com/model/62627-diy-greenhouse-by-kms (EU-Sizes) I will focus on publishing the parts for the size US 4x2 for now. groundspike added 7/4/2023 Roofpart…
The Watchholder was designed to make it easier to work with a laptop as a watch carrier. The buckle has caused the surface of the laptop to be scratched. Now you can work without problems and always keep an eye on your watch. Happy…
About: Ever been shopping and didn't have a coin to release your shopping cart? Just annoying to stumble like a pack mule through the supermarket. Now with the coinholder you can always have a coin with you. The holder is designed for a 1…
This is a magnetic version of my headphone holder for a magnetic wall or like me the metallic table legs of my desk. Simple design with a small logo. Perfect for headphones of any kind. Happy Printing and feel free to leave a comment or…
A clean and aesthetic solution to store your keys. Always in the same place and no more looking for keys. The key tray is part of the Office Collection from KMS:…
ABOUT The simple labelling spike was created in context with of my DIY-GREENHOUSE by KMS. For space reasons, I have uploaded the photos separately here. So feel free to have a look at the "big" project, where you can also download the STL…
To prevent the filament from absorbing moisture and degrading, such as ABS, ASA or water-soluble filaments, it should always be kept dry To ensure that the filament remains dry during printing, it is recommended to print directly from the…
The caliper holder is part of the KMS pinboard system. Due to the standardised dovetail, the holder can simply slide onto the dovetail: Basicholder (perforated): https://www.prusaprinters.org/prints/44241-basic-holder-for-pinboard-by-kms…
I´ve seen many Dooropeners here in the Competition, very well designed but a lot of them take a long time to Print. The shapes that make a great design are often hard to clean. So i decided to develop my own Version. Simple and easy to…
Who doesn't know the small parts that fly around everywhere and when you need them, you can't find them. Very annoying. But wait, there is a solution. The Rotation dispenser from KMS. In 3 easy steps just pick your part: Select - Open -…
A clean and aesthetic solution to store your pins. Always in reach to pin the next task to your board. Since it is so simple there is little to say about it:P The pin holder is part of the Office Collection from KMS:…
Just sharing the parts I designed while building the amazing Project by V1Engineering: Mostly Printed CNC Primo F-25mm MPCNC by V1 Engineering | Download free STL model | Printables.com The end stop is screwed to the holder with two M2.5…
The Hammerholder is part of the KMS pinboard system. You wonder what makes him so special ? It can be easily adjusted to your hammer. Whether large or small, it adapts itself optimally to your needs. 500g or 300g no Problem for the…
Thoughts: I initially started this project with a different thought process. I took the PS2 controller and started to remodel it to get a nice match. I also started to design different grip shapes. The problem?.. : The system would only…
The bottle holder can be easily mounted to your table or enclosure with a 4mm Spax countersunk screw. You can differentiate between a left and a right version. Depending on the version you can download the appropriate files. Left marked…
A simple and clean hook for hanging up your headphones. Attaches to your desk with a small wood screw and can be printed in under an hour (42min). The hook is designed to provide extra support so that it cannot bend. Simple solution for a…
Please not the closed endcap has a slightly tighter tolerance, then the open one. Therefore the closed endcap is not made for removal. The open endcap is removable by slightly twisting it. The Pipe used in the picture is 50mm. The length…
This Headphoneholder mounts easily to your perforated wall using a dovetail System. The holes in my perforated wall have a diameter of 5 mm, so I used an M6 tap to fix the headphone holder. If it should have another perforated plate, I…
The Depth Gauge holder is part of the KMS pinboard system. Due to the standardised dovetail, the holder can simply slide onto the dovetail. Basicholder (perforated sheet):…
This simple remix allows to run the bowden tube trough the back.
The Protractor holder is part of the KMS pinboard system. Due to the standardised dovetail, the holder can simply slide onto the dovetail. Basicholder (perforated sheet):…
Use small zipties to attach the lables.
Combine the suitable modules to obtain the desired height. Take the basic module and add the desired middle parts before you finish the build with an End piece. The circles are to prevent the leg from slipping on the elevation. For a…
The dovetail is a basic holder of the KMS pinboard system. This version can be fixed with two 3.5 mm wood countersunk screws. This gives you maximum flexibility in the arrangement. With the basic holder you can attach all elements that…
The basic holder is a dovetail, which is attached to the pinboard with an M6 screw. The holes in my pinboard have a diameter of 5mm and a distance of 7mm. If you should have another pinboard, I have uploaded the basic holder as step file…
To wszystkie aktualnie dostępne wyniki.
