Liczymy pasujące modele…
This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cute little ghost with whistle function: Plays two off-key notes: F6# and E6 (cover the other hole) Blow in reverse direction and it makes a howling wind noise. Hole on top for attaching to bag or hanging up as Halloween…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit two toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a case with snap-on lid for a single deck of standard size playing cards. It is the same design as my other two deck model, just reduced in height for single deck: Playing Card Holder for 2 Stacked Decks Printing Tips This is a…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena jednego wariantu
This is the bony buddy of previous model Ghost Whistle : https://www.printables.com/model/604285-ghost-whistle Skelly Eyeball Skull has movable eyes and a movable jaw. There is an optional stand but the skull can also stand upright on its…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
This is a simple drywall stud finder. It uses a strong neodymium magnet to detect drywall screws which indicates possible stud locations. Move the stud finder across the wall until the center indicator starts to rattle and snaps in place,…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
This is a fun tiny fidget spinner. A popular giveaway. Print-in-place spherical plain bearing. Hex center hole, stick it on a pencil or hold between your fingers. Cheap, only 3 grams of filament. The attached gcode does one spinner in…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This is a simple cone holder to help while putting the ice cream tub back in the freezer. Print with top against build plate. No brim or support should be needed.
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit three toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model of a .50 inch caliber cartridge (known as 50 BMG or 12.7×99mm NATO). The clip is fantasy and just for display purpose, it fits 5 cartridges. This ammunition type is for example used in the M2 Browning heavy machine gun and the M82…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
A template for drawing a No Bullshit Sign : Prints as one piece for easy use. Works with fine tip pens like mechanical pencils. Also functions as a spray paint stencil.
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Simple model to hold 2 decks of playing card whose original box is missing. Lid snaps in place and has a clover (clubs) decoration. Internal height is 33 mm. There is a remix for single deck:…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This is a little racing toy for fingertips: The model is oriented for easy printing. No supports should be needed. Plain bearing is print-in-place. The “pedals” are printed as one piece but breaks apart for press-fitting into the wheel…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
This is a little system of different sized containers. The design goals are the following: Look nice so it can be left out visible on the desk, dressing table or bath room. No obvious 3D-printed vibes. Form over space optimization. Easy…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
This is a print in place toy. Blow through mouthpiece and the rotor spins. Printing Tips Should be an easy print. There is a bit of bridging, clean away any fallen extrusions after print.
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
This is my little chess set. Highlights: Weighted pieces for nice feel and stability. Compact but still comfortable to play, 25 x 25 cm. Recess help pieces be neat and centered in the squares. Labels along all edges, 1..8, A..H. Easy…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
This is a full size model based on measurement from an actual euro-palet. Scale it down to needed size in slicer, for example 1.149% for 1:87 scale:
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is a case to store Pokemon cards. The lid snaps in place at different heights to support a growing collection of cards. Max card stack height is 30 mm.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
This is a simple clip to hold folded up cables. The clip can be closed and opened using a flexing snap lock. Three different sizes are available. Printing Tips Use a filament that allows for some bending. I found PETG very good for this,…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a fruit fly trap, reminiscent of the iconic Sydney Opera House. It screws on as a lid on standard 50 mm diameter glass jars. Taco sauce, jam and Dijon mustard are products commonly sold in this smaller jar size. I fill mine with a…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
This is a cute little pebble with googly looking eyes: Eyes are print-in-place and can be moved to give different expressions. Attachment point for tying to bag or elsewhere that could use another pair of eyes. Printing tips: Add color…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
I made this quick model to support some small weaker plants. Push onto bamboo skewers to form the needed support. I use them in a triangular fashion as seen in the pictures. Intended for round skewers with about 3 mm diameter.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
The Shining maze drawing template: This model is a “negative”, the pen fills in the hedges of the maze. Size of model is 118 mm x 77 mm. Nearly gave me cramps filling in the whole maze using a pencil.
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
I made this for a Roland FP-E50 digital piano with the KSFE50 stand. Keeps cables and power brick hidden behind the crossbar of the stand. Can probably be used with other piano stands, crossbar is 15 mm thick. There is a also a holder for…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a sink strainer made specifically for the Intra brand strainer basket (Ø78 mm, Product number: 8980265 ). It clips onto the existing basket and will minimize the amount of food scraps that make it down the drain. There is also a…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About I was out of old toothbrushes so I made this temporary brush tool to clean a bicycle chain. Printing tips Print fast and ugly at 0.3 mm layer height. It will soon be worn out and thrown away. Model has built in support. Carefully…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Small hook for the IKEA IVAR shelving unit. Fits 6 mm diameter shelf pin holes. Printing Tips: No supports needed. Prints as a pair; break apart after printing. I printed without brim but bed adhesion can be a challenge given the small…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a small tray for six Dolce Gusto type coffee capsules: Clean uncomplicated design, easy to print. Capsules sit slightly angled for an elegant look and easier pick up. Model file oriented for printing without supports. Bonus model:…
Wydruk około 4,03 €–4,93 € nettoWstępna wycena jednego wariantu
Highlights: An alternative for the Ikea Schottis blinds clip that some people struggle with. Can be fastened at different heights. Can remain on the blinds also when fully closed, will not fall off. Quick release to different heights,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zipper pull for larger zips used on luggage suite case. Use 0.15mm layer height for strength (as recommended by CNC Kitchen). Enough perimeters to make the loops solid, I used 5. The PrusaSlicer project has a text label that can be…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The old Philips Hue dimmer switch has a design flaw causing it to break and the battery not sitting tight. This part replaces the broken thin piece of plastic that hold the battery cover tight. It's a very small part, don't use old…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed to test some button cell batteries but my cheap multimeter had no built in load resistor. This super simple tool help clamp a resistor and dupont jumper wires to the probes. I used male-male dupont wires, removed the plastic…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Simple funnel/canister-spout. Fits refill washer fluid canister with 33.5mm inner diameter cap opening. Does not screw on, just insert and hold it against the opening. Update 2026 March 29: I have uploaded a new improved version of this…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
This is a simple music stand extender to support single note sheet papers. It grabs on to the music stand using a tightening nut. Printing Tips Easy to print. All parts already oriented for printing without needing supports. I printed all…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
Replacement for broken chain guard on Specialized Hotrock 24. There are 5 attachment points on a ⌀90 mm circle. I attached using cut off wood screws and printed washers from the back.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a snout and monocle accessory that plugs into the Skelly Eyeball Skull model: https://www.printables.com/model/615055-skelly-eyeball-skull Turns Skelly into a pig faced aristocrat, may his wealth trickle down to everyone. It is a…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This is a simple stand with space for two tennis rackets, keeping them organized and off the floor. Rackets slot in with the handle downwards.
Wydruk około 9,22 €–11,27 € nettoWstępna wycena jednego wariantu
This is a saucepan for Lego kitchens. I have found there is an official LEGO part 4529 saucepan, getting real LEGO is the best. This model is slightly larger than the 4529 part. Model is oriented for print without supports. 0.15mm layer…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Simple funnel or canister spout. It doesn’t screw on, so the size is fairly flexible—just insert and hold it firmly against the opening (minimum 30 mm diameter). Includes an air vent channel to prevent glugging. Printing Tips Model is…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Blocks the filament spool from rolling when stored vertical. Print two instances for one spool, three for two spools, or as many as needed.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
I managed to break one of the plastic holders for the hanger rod in my HTH wardrobe. HTH is a big brand for kitchen and wardrobe units in northern Europe. This a replacement part with additional hanging space on each side for belt and…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As a child in the 80s, I remember scraping ice off car windows with a broken cassette tape case. This model is a throwback to that era, modeling the general shape of a cassette case half. A silhouette design of a cassette B-side covers…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
It's a curved dull knife with sheath. Printing Tips Blade is optimized for easy print. It is flat with no details on the side against build plate. Sheath is meant to be printed standing upright but it is tall and narrow. I used some…
Wydruk około 1,76 €–2,16 € nettoWstępna wycena jednego wariantu
Small tool to help getting drawstrings or rubber bands through holes: Hook or slot for holding on to rubber band or string. Scale it up in slicer if longer or larger tool is needed.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple container intended as a set of 3 for a full circle. Outer corners are slightly interlaced for appearance and more rigidity. Dimensions: Diameter: 248 mm Height: 75 mm Wall thickness: 0.8 mm Shape is optimized for a quick…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Simple lid for Iodised Salt packet sold by Lidl. Hopefully helps against iodide evaporation. The model is suitable for quick spiral vase mode printing.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
This is 3DBenchy remixed as a fruit fly trap. It screws onto standard glass jars. The lid is from my other design: https://www.printables.com/model/1097349-opera-fruit-fly-trap It needs a 50 mm diameter glass jar, I used a small Dijon…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A chess themed coaster for cups. This is in the shape of the “Winner” chess.com icon: Add a color change on the top few layers. I also have a model with the “Brilliant Move” icon:…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this to replace a broken cross connector on a cheap "dollar store" type of kite (from Søstrene Grene in this case, many cheap kites are probably similar). Fits 3 mm glassfiber rods. The cross joint has a 12° dihedral angle, not a…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter to make small filament spools fit the Prusa Mini filament holder. I made this for a small Sainsmart TPU roll that did not work well with the holder. Assembly You need an empty Prusament spool to reuse. Remove the paper…
Wydruk około 2,82 €–3,45 € nettoWstępna wycena jednego wariantu
3D printed bottle opener. Features Opens beer bottles. Hole for key chain. Pointy tip for breaking through box tape and opening boxes. Printing Tips Not sure how long term durable it is, don't use brittle filament. Print with enough…
Wydruk około 0,54 €–0,67 € nettoWstępna wycena jednego wariantu
Made to organize a few contact lens bottles and other items (Avizor/Regard). FreeCAD model available for the brave.
Wydruk około 2,61 €–3,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an articulated roach model. It has six legs and a head with joints that snap into the body . It's pretty creepy. Printing Tips Available as a complete kit card or as individual parts. Printable at 0.3mm layer height to save time.…
Handle for longer types of hex bits, such as a magnetic bit adapter. Built-in spring keeps bit in place. Printing Tips Easy print. Use settings with strength in mind. I used: 0.15mm layer height, PETG, 30% Cubic infill 3 perimeters, 6…
This is a little quad-legged robot with gun turret. All parts are flexible but stiff to make posing and stop motion animation possible. Easy print without needing any supports. Parts snap together except the turret which is print-in-place.
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
Miniature of a Colt SAA Revolver (Storekeeper or Sheriff model) with classic octagon barrel. Prints as 6 different parts that are press-fit together. Simplified model: The hammer is fixed and no loading gate. Trigger moves but does…
Cute little sea star toy for the bathtub. The eyes are movable and print-in-place. Mouth can spout a little bit of water when blowing through a hole at the back. Printing Tips Should be an easy print. The only challenge could be the…
This year I'm experimenting with hydroponic growing, Kratky method specifically. I made this jar lid with inbuilt net pot. It screws onto common glass jars. Jar neck diameter should be 8 cm with 6 lug threads. A very common size in…
This is a big fully 3D printed axial bearing: The model consist of 3 files: Retainer : holds the rollers and housing in place, print one of this Housing : upper and lower housing are identical, so print two of this file Roller : tapered…
Old style glasses that clips to the wearers nose: https://en.wikipedia.org/wiki/Pince-nez There are many fictional characters known for wearing this kind of glasses, for example Hercule Poirot, Morpheus, Scrooge McDuck and many more. This…
This is a simple photo frame for A4 prints (210 x 297 mm). Can be hung on a wall or stand on a table. The frame is a tiny bit smaller than A4 for a sharp look, frame is only visible from the side. Can be printed on a MINI build plate by…
This is a case for keeping steak knives orderly and neat in the drawer: Features: A clip keep knives from falling out. Model available in different sizes: Capacity: 1x, 2x, 4x or 6x knives Blade height: 16mm, 18mm or 21mm Blade Length: Up…
This is an inside pot made for the IKEA PAPAJA plant pot. Fits the 19 cm tall PAPAJA pot. Does not go all the way down but sits on the internal edge of Papaja. Plenty of aeration and drainage at the bottom.
This is a little shelf for one single whiteboard marker. Made for glass whiteboard, max 4 mm thickness and 3 mm clearance behind. Model oriented for easy print without supports.
Tray for a few sewing thread spools and bobbins.
I made this small roller to catch some thrips that had invaded my room from a window. Also works to pick up hairs, dust, etc. There is a notch on the roller to help aligning, start by sticking the tape here. Roll the tape with sticky side…
Frame to store and display Instax Mini photos. Highlights Keep single or many photos, top one on display. Rubber band holds everything together. Adjustable leg to set lean angle. Simple minimalist design. Printing tips I got nice surface…
Mounts mop handle to wooden deck brush. Made for the SMART brand mop handle. It has some kind of ⌀24 mm tapered screw thread. Should be easy to remix for other mop handles, STEP file provided.
Wall mount for a small fire extinguisher. The opening has a diameter of 87mm and fairly snuggly fits an OSEC 1kg dry powder fire extinguisher. Prints as two parts that are held together after screwing it to a wall.
This is an end plug for MTB handle bars. Made for 22.2mm diameter at the grip end, a very common size. Inner diameter of my bar ends is 18mm. Must be printed in TPU . I used 95A hardness. Do not try PLA or PETG, it will not go in. FreeCAD…
This is a coaster in style of the Brilliant Move symbol in chess. Very easy fast print. Add color change for the exclamation marks to stand out. I used Hilbert Curve top fill pattern for a bit of texture.
Pollen season is in full swing in Scandinavia. I made this organizer to keep the daily allergy medicine a bit neater on the table: 49 mm, 29 mm and 17 mm diameter slots.
Gridfinity 2x2 storage bin designed to use a standard Pringles lid as a transparent cover. Good for hardware and small parts storage. Features Reuses Pringles lids to close the container. Available in heights from 49mm to 175mm (7u to…
This is a drop-in replacement for the mechanical ice cube system Siemens 00709709 (which is a very bad design prone to breaking, jamming and with low capacity). Add plastic drawer 44-4173 from Clas-Ohlson and a regular ice tray on top.…
The back wheel rubber was broken on this toy Silverlit RC car, so I made this replacement. Must be printed in flex material ; I used 95A TPU . It's still a bit stiff but can be pressed on with some effort. Use random seam position to make…
To wszystkie aktualnie dostępne wyniki.
