Liczymy pasujące modele…
I wanted to improve on the capacity, jamming issues, and printability of the Stackable Battery Holders by adoniram, and this is what I came up with. This model is stackable, prints in 2 pieces, and holds 24x AA batteries. It also has…
Wydruk około 11,39 €–13,92 € nettoWstępna wycena jednego wariantu
This is a series of slide-together trays, to store and organize the Makedo Discover set of cardboard box construction tools. https://www.make.do/collections/all-products/products/a0126-discover The "SCRU"/"SCRU XL" drawers are…
Wydruk około 6,45 €–7,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Turn your Magic Band v2 bracelet into a sturdy keychain. 1.) 3D print this keychain using PETG, 90%+ infill (solid), <= 0.15mm layer height, and no supports. Orient the "face" of the keychain toward the bed, and the "back" upward. I used…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small stand for the Blink Sync Module 2. Prints with no supports. Print with 3+ perimeters, so that the walls are solid. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20mm Infill: 15%…
Wydruk około 2,84 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an improved fan duct with shroud for the Modix Big 60 (& 120) printer, with the Hart Smart Products "Premium Printhead", which consists of a Bondtech BMG-M extruder and Slice Engineering Mosquito Magnum+ hotend. Exceptional…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drop-in organizers for the drawer in a Bestop 42640-01 HighRock under seat lock box. Used to keep sets of annual passes at the ready. https://smile.amazon.com/gp/product/B004BWU8H8/ NOTE: I just tried to put a business-card-sized…
Wydruk około 7,39 €–9,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drop-in organizers for the drawer in a Bestop 42640-01 HighRock under seat lock box. Used to keep sets of annual passes at the ready. https://smile.amazon.com/gp/product/B004BWU8H8/ NOTE: The "Long Slots" version will fit a…
Wydruk około 6,46 €–7,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a little hook I made to hang Christmas stockings from a 1.575" (40mm) thick counter top. They hold quite a bit of weight, and can be scaled to any countertop size. Print them with 90% infill. Category: Decor
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a little hook I made to hang Christmas stockings from a 1.425" (36.2mm) thick counter top. They hold quite a bit of weight, and can be scaled to any countertop size. Print them with 90% infill. Category: Decor
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
I didn't want items falling inside my CrossFit jump box, so I designed these covers to catch things. They stay away from the edges in every direction, so that you can comfortably pick up the box in any orientation. If item do fall inside,…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The label maker hurts your hand when you use it, because the plywood edges are thin and sharp. This part clips on the spring spacers, and provides a large flat surface to spread the pressure and make it more comfortable to use. The label…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…
A remix of the original "Billy The Doll From Saw/Jigsaw" head, to make a Halloween mask. I hollowed the head, cut the back of the head off, and put holes in the eyes. I printed at 115% to fit my face. This was also max size to fit on the…
Simple blank dog tag, modeled from a real military (metal) dog tag, and then thickened slightly for strength. Category: Keychains
Introducing a whole new portable way to store and dispense your batteries, the BatteryMag! Designed to look and function like a standard rifle magazine, this handy device holds up to 14 AA batteries. It works very well for keeping extra…
I wanted to improve on the capacity, jamming issues, and printability of the Stackable Battery Holders by adoniram, and this is what I came up with. This model is stackable, prints in 2 pieces, and holds 36x AAA batteries. It also has…
A blank version of the office sign.
Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…
A 3.5" tall, 3D version of the Assassin's Creed logo. Specifically, this should be the correct size for an Assassin's Creed III - Connor Kenway costume, on the belt. Sorry about the "educational part" warning from SolidWorks. I made this…
A streamlined and more comfortable prop "brass knuckles" design, based on my previous model, which was based on some cool hex knuckles I saw online. The original design seemed like the sharp corners would be dangerous to the user. Specs:…
A small stand for (Amazon) Blink Outdoor cameras (BCM00400U). Compact design. Notch on front of riser allows camera to be angled downward. Uses OEM mount and screws, and provides stable feet. Feet are not visible to camera, in any…
Holds 36 business cards in an attractive turbine-engine pattern. It really draws attention to your cards, though unless you take one out to make it "imperfect", people may be reluctant to touch it. This would be great at expos, trade…
An Among Us keychain, with the key ring beefed up to make it stronger. Print it at about 150%, for a good keychain size. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15 Infill: 20% - 6…
Here is my third version of a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the game, but if you're making a costume for…
Some prop "brass knuckles", designed to look like some cool hex knuckles I saw online. Specs: *Dimensions: 4.545"W x 2.320"D x 0.535"H *Volume: 1.44 cubic inches *Weight: ~0.05 pounds Files: *Knuckles: PTW-00-1-PT-0239 (Prop, TKM Hex…
Replacement foot (normal size, and 1" extended version) for Lasko 20" box fan (from Walmart)... https://www.walmart.com/ip/Lasko-Cool-Colors-20-Box-Fan-with-3-Speeds-B20200-White/42388499?athbdg=L1200 You need to print it with supports in…
This duct allows you to mount either a 120mm or 140mm fan into the handle holes on the side of XYZPrinting Da Vinci 1.0/1.0A/2.0/Pro/AIO/etc. printers. This works great for cooling PLA prints during printing, or for expediting the cooling…
I designed this 2-part snap-together spool to hold my 25ft flat CAT6 network cable, that I use to take to LAN parties. The spool has a notch in it that lets the inside end of the cable come out through the center of the spool, while the…
I designed this to brace the corner of the lid on an Modix Big 60 printer, but it can be used for any 2020 aluminum extrusion and M5 t-nuts/screws. For the Modix printer, the standard low-profile head screws used for the rest of the…
A taller version of my Blink Outdoor camera stand, so that, for example, the stand can sit on a window sill and be tall enough for the camera to see out the window over the window frame. Print Settings Printer Brand: Prusa Printer: I3…
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233 Here is my second version of a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure…
This holds the deck of cards for the game CandyLand. It includes two different locking devices - you can choose which to use. The "key" slides through the holes, to lock the deck in place when not in use. The other variant snaps down over…
A small storage box, with a window. I use it to keep some playing cards in, as well as another for ID/credit/gift cards. I designed this to look like the great example in this Filament Sample box (though mine does not actually use any of…
These are shorter versions of the of the body for the BatteryMag ( http://www.thingiverse.com/thing:1923333 ), that hold 10x and 12x AA's respectively. I've never printed these, but if you do, please post a picture and how they worked.…
This is a set of organizers for the cards in the board game Haunted Mansion: Call of the Spirits. The set consists of... A pair of stackable holders for the Ghost cards below, and the Event and Quick Reference cards above. A dispenser…
These plugs fill the holes in the interior floor of the XYZPrinting Da Vinci 1.0 / 1.0A / 2.0 printer, to prevent objects falling inside. Variations of the plugs themselves have holes in them, to store your UHU glue stick, brush and…
I made this one a while back. A cycloid is the solution to the solution to the Brachistochrone curve problem, which is the curve of fastest descent due to gravity. You can store some pennies in the slots in the base, too. Print…
If you have a milling machine that uses R8 collets, you can use this handy holder to mount some close at hand. I specifically designed it to be 1" wide, so it will mount nicely to 1" (10-series) 80/20 aluminum extrusion t-tracks, but you…
NOTE: SEE v3 HERE: http://www.thingiverse.com/thing:1411233 Here is a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the…
This box organizes and stores a set of radius gauges. Buy these three sets to fill the box: https://smile.amazon.com/gp/product/B08BC3SM1V/ https://smile.amazon.com/gp/product/B00TACBQUM/ https://smile.amazon.com/gp/product/B010GPQ3CM/…
This little magnetic hook lets you hang your extra air compressor fittings right on the side of the tank. Specs: *Dimensions: 2.000"W x 1.375"D x 1.125"H *Volume: 0.68 cubic inches *Weight: ~0.03 pounds Files: *Hook for 18.5" diameter…
This heavy duty device lets you chuck up the internal spool from a XYZPrinting Da Vinci filament cartridge in a drill, so that you can rewind new filament onto it. No 3D printed screw threads to worry about, or tiny engagement teeth to…
This heavy-duty magnetic headphone hook can attach to a table, cabinet, or other surface, to hold your headphones securely when they are not in use. Specs: *Dimensions: 3.00"W x 2.100"D x 1.500"H (assembled, excluding magnets) *Volume:…
RP018250 Pivot Pin for Bracket on Flexzilla L8250FZ Retractable Air Hose Reel NOTE: I ordered a set of this part number (pins) from Flexzilla, and they were not correct. The pins in my air hose reel are pointed, and the pins I received…
This simple case protects your Garmin DriveSmart 61 GPS while you're traveling. I was always afraid that it would be damaged in my luggage, so I made this to keep it safe. Just print it out, place the GPS inside face-first, and secure it…
This simple case protects your Garmin Nuvi 2595LMT GPS while you're traveling. I was always afraid that it would be damaged in my luggage, so I made this to keep it safe. Just print it out, place the GPS inside face-first, and secure it…
This cap protects the power supply end of a Hypertherm Powermax plasma torch cable. Specifically, I have tested this to fit on a PowerMax 65, though it should fit on 45, 85, 105, etc. also. This is especially useful if you have both a…
A shelf that attaches to the holes in the interior wall of a Da Vinci 1.0, 1.0A, and 2.0 printer, to mount a webcam (or other accessory). Specifically, I am using the TeckNet C016 USB HD 720P Webcam, 5 MegaPixel, 5G Lens, USB Microphone &…
This bracket replaces the aluminum hotend fan mount bracket on a Modix Big 60. NOTE: USE AT YOUR OWN RISK. The original bracket is aluminum, and when you crash the print head, the bracket bends but stays attached. This bracket will snap…
This small hanger holds the swiveling vise handle that came with my small 4" milling machine vise. The handle has a 19mm (~0.70") ball on the end. I specifically designed it to be 1" wide, so it will mount nicely to 1" (10-series) 80/20…
A 3D printed replacement earpiece holder for the headphones kit from Kiwi Crate - Eureka Crate. The original wooden piece broke easily. Print it fairly solid, so that it will be strong. Print instructions Category: Audio Summary A 3D…
This mount holds a Gecko Drives G540 stepper motor driver upright, so that the incoming cables plug in nicely. It leaves room underneath for the wires in the back (just unscrew it and lift it up to work on the wires). Works very well.…
We've printed several of these crowns over the years, and they turn out nice, but the models are very old, from an era when printing was not as mature. Printers are better, and bigger, now, so I fused the models together to print as one…
This holder displays 8 US quarters in the front slots, and also has a set of slots on the back allowing you to move a quarter from the front (in view) to the back (out of view). There are two versions of the model, one with frown faces…
Not really a "remix" but an accessory. I liked the little Crate for Business Cards, but wanted some dividers. I tried to make it so that the 5th tab would be centered, and tabs 6-9 would be the same as 1-4 but reversed, but I must have…
This is an improved version of my previous fan bracket, that is tethered. The story: My original metal fan bracket bent, so I made the 3D printed replacement. That eventually broke (when the extruder hit a blob, or something), and then…
To wszystkie aktualnie dostępne wyniki.
