Wyniki wyszukiwania: 02mm

Sortowanie

Liczymy pasujące modele…

precision calipers 0.02mm

fully working calipers with 0.02mm precision

Pobrania
731
Polubienia
105
Ocena
1
P
PrintablesJ Lake 3D

S Shaped Tolerance Test 0.1-0.4mm in 0.02mm Increments

A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best. This test is incremental by 0.02 and based on my round test. UPDATE: Added an attempt at a model with some…

Pobrania
554
Polubienia
31
Ocena
5
P
PrintablesJEdwardS

Mini-z semi truck body 98mm and 102mm

3d printed racing semi truck body for Mini-z 102mm and 98mm wheelbase I haven't tested the 98mm version with the stock mr03 98mm pod!!! This remix works with the stock pod:…

Pobrania
450
Polubienia
59
Ocena
5
P
PrintablesKAYMOST

OpenZ V16 Pontiac GTO 1965 102mm Wheelbase

Pontiac GTO body, made for open Z V16 model Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: It is advisable to print this…

Pobrania
335
Polubienia
41
Ocena
0
P
PrintablesJEdwardS

Mini-z pick up body, 98mm, 102mm

Pick up body for Mini-z. 98 mm wheelbase, 0 offset wheels. Uses accessories from the Van Bus body: https://www.printables.com/model/216437-mini-z-van-bus-body https://www.thingiverse.com/thing:5387420 updated body for more rear shock…

Pobrania
319
Polubienia
73
Ocena
5
P
PrintablesHetothet

Helldivers 2 Coaster 4inch/102mm

Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX

Pobrania
93
Polubienia
21
Ocena
5
P
Printablessynth

Bahtinov Mask, SVX102T: 102mm aperture for ~700mm FL telescopes (128mm ID sleeve)

Prints very simply. Design includes spacing for a thin adhesive felt/flocking tape, like this one (non-affiliate link). 3MF file includes designs for 714mm & 528mm focal length Bahtinov patterns, make sure you're printing the desired…

Pobrania
75
Polubienia
3
Ocena
0
P
PrintablesJangy

MINI Z Racing Truck 102mm wheel base

MINI Z Racing Truck 102mm wheel base design for RWD chassis. For the 98mm wheel base https://www.thingiverse.com/thing:4837099 or 94mm wheel base https://www.thingiverse.com/thing:6133471 Print Settings Printer Brand: Tronxy Printer:…

Pobrania
73
Polubienia
12
Ocena
0
P
PrintablesChuzo

Printer Box Air Exauts 100mm and 102mm

Modified for 100-102mm vent pipe

Pobrania
72
Polubienia
9
Ocena
0
P
PrintablesBogas

Token Box / Token Holder 102x102mm

A bigger vesrsion of mine simple token holder, great for board games. You can storage multiple boxes on each other. In 3mf file is added modifier that make bottom like on photo (honeycomb). STL file got flat bottom.

Pobrania
63
Polubienia
7
Ocena
0
P
PrintablesMoe

Magnetic Connector for AC Infinity 100mm/4" Inline Fan to 102mm Hose

AC Infinity 100mm/4" Inline Fan to 102mm hose magnetic connector, using 12x 10x3mm magnets per Model and a TPU seal

Pobrania
63
Polubienia
24
Ocena
0
P
PrintablesStampyPictures

102mm refractor scope rings and dovetail

I made a set of telescope rings and a long dovetail for my 102mm refractor, I didn't want to spend $100 for a set of metal rings that “might” fit. So I designed my own! I printed the rings and dovetail in ASA from Overture, I wouldn't…

Pobrania
50
Polubienia
4
Ocena
0
P
PrintablesR_mix

Magnetic Parts Tray 12 Compartments 155mm x 102mm

Simple 3x4 magnetic parts tray for small screws or whatever. 155mm x 102mm. Takes 12, 8mm x 2mm magnets.

Pobrania
48
Polubienia
6
Ocena
0
P
Printablesneopifex

Solar filter material holder (102mm diameter)

This is a simple holder for solar filter sheet material, made for the 2024 total solar eclipse. It is designed to fit over the hood of the Pentax DA* 300mm F4, which has a diameter of 102mm, but shouldn't be too hard to resize for…

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesRPK

Hair Dryer Fan Mount for Radiators of 57,82,102mm depth

EN: The apparent lack of demand in a bracket for the hairdryer https://www.printables.com/de/model/864578-hair-dryer-fan-radiator-mount for bathroom radiators gave me the idea that it could possibly be due to the large number of different…

Pobrania
27
Polubienia
1
Ocena
0

Parliament hinge jig 102mm

I needed to use 102mm parliament hinges for a door in my shed. I didn't need the projection that the hinge typically provides but wanted to make sure that it's attached to the core of the door and the frame of the building. All the jigs I…

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesJesco

Simple Stand for 4" Refractor / Ständer für 102mm Refraktor Teleskop

A simple and small stand to put your 4" refractor onto a shelf. Just print the stand 2x and connect them with a 6mm rod (I had some 6mm linear rails lying around, I suppose wood will also work). In the attached picture I printed one of…

Pobrania
24
Polubienia
6
Ocena
0
P
Printablespotato42

Ring Stick Up Cam Pro (Solar) 102mm/4" Pole Mount

Remixed from a 3" version that used M4 screws. Tried to replicate original design as much as possible but made two changes: 1) This now mounts on a 4" pipe (like a PVC radon mitigation system pipe). For some reason, my 4" pipe was…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesSlegnor

Vixen 102mm Refractor Replacement Focus Wheels

Remix of Vixen 102M Replacement Focus Wheels by Ratlet Ratlet's version was solid on both sides whereas the originals are hollow on the inside. Ratlet's wouldnt fit correctly on my 4" vixen Refractor with the original screws, so remixed…

Pobrania
17
Polubienia
0
Ocena
5
P
PrintablesTjucktjuck

102mm Ventilation wall mount

Needed to mount the ventilation hose from my Core One to the wall, so i made a mount for it. The mount has a latch that locks into place. Used 2, 5mm screws to mount it to the wall.

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesMaker Frogg

Voron M4 extruder motor plate for 202mm belt

I had all of the parts on hand to build an M4 extruder except for the 188mm belt called for in the original design. I had a 202mm, so I adjusted the motor mount plate to adjust for the longer belt and still have proper tensioning range.

Pobrania
8
Polubienia
0
Ocena
0
P
Printablestaterman

102mm Extension for Curved Litho

Quick taller lid for the Curved litho case for the taller Lithopane

Pobrania
8
Polubienia
3
Ocena
0
P
Printablesventrue3000

Ecoflow Wave Small hose to 100/102mm flex hose adapter

Allows using 100mm (really more like 102mm) spiral flex hoses on the cold air outlet. You can also cut off the adapter part of the straight adapter and stretch it to 100mm to make a connector for two hoses. One 6m Hornbach no. 8610925…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesPhantomNight_

Graphics Card Holder 102mm

Print both pieces, cover the hole with glue, and insert the pin piece. Place it under the card and enjoy safe computer operation.

Pobrania
6
Polubienia
1
Ocena
0
P
Printableskevinthenard

Xiaomi LYWSD02/LYWSD02MMC Thermometer Holder for IKEA SKÅDIS

Xiaomi LYWSD02/LYWSD02MMC Thermometer Holder for IKEA SKÅDIS This holder is designed for the Xiaomi LYWSD02MMC/LYWSD02 e-ink Bluetooth thermometer , displaying temperature, humidity, and time. It allows the thermometer to be mounted…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesSpencer

Accessory Dovetail for telescope finders - modified to fit a 102mm Maksutov or other radiused optical tube

This hardware-free tapered dovetail is about the best thing I've found for finders and accessories (PiFinder) on my telescopes and Analog Sky Heart 3D printable binoculars! I love this thing so much that I've started making remixes to fit…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesJavier Otero

Conector tubo 102mm marcho macho 90 grados

Conector para tubo flexible de 102mm en formato marcho macho a 90 grados. Yo lo voy a utilizar para el tubo de la salida de humos del extractor de la cocina.

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesSillybutts

Solar Photography Telescope Filter Frame & Carrying Case for the Orion StarBlast 102mm AZ Refractor Telescope

This is my 3d printed frame for solar photography film, which also doubles as a carrying case/protective case for the film (since it's fragile!). The holes on the edges of the carrying case covers are intended for elastic cord to be tied…

Pobrania
2
Polubienia
4
Ocena
0
P
PrintablesJavier Otero

Conector tubo 102mm marcho macho 45 grados

Conector para tubo flexible de 102mm en formato marcho macho a 45 grados. Yo lo voy a utilizar para el tubo de la salida de humos del extractor de la cocina.

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesDanielG

102mm Telescope Light Shield with vent

I love my small scope but wanted the most contrast possible in my area, so I created an over-the-top light shield for my Sky-Watcher Skymax 102 mm Maksutov-Cassegrain. Print the vent strips and resize them to fit better; the spring…

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Helldivers 2 Coaster 4inch/102mm

Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX

P
PrintablesDaveGL

Adjustable Door hinge jig for 50mm (2") to 102mm (4") hinges

I recently had quite few doors to hang and decided to create a pair of jigs to speed up the process (ignoring design and print time!!). Different hinges were involved so I needed the jig to be adjustable. This pair of jigs enables a…

Polubienia
1
Ocena
0