1303 modeli
Thanks Peter H for making the original customizable via OneShape! M4 screw will fit on the open piece to allow removal of the power brick. If you don't want the open end, then print 2x closed ends.
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Air assist for NEJE A40640 (40W) laser module.
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Vertical holder for Ugreen Nexode 100W charger. It includes cable holder to prevent damages on the USB C plugs. Print with supports. Stick it to the wall with double sided tape. Slots for cable should be able to take the Ugreen 100W PD…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena jednego wariantu
A Unifi Switch 8 rack mount for a 19" rack. Printed with No supports 3 perimeters / walls Use the “Blende Links.stl” panel from 19" Rack Panel Hexagon Design to get the other half of the mounting panel.
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
this is part specific, guaranteed fitment with… asrock b650i lightning, with IO plate removed asus 4060 lp with io shield removed and up to about 69-71mm cpu cooler clearance, I have used a IS-55 with a P12x25mm you want a 120mm fan for…
Wydruk około 7,60 €–9,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple way to manage the new MagSafe cable
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
A useful print to hold indicating desiccant. When the desiccant changes color and has absorbed all the water has held it needs to be dried out. This typically involves laying it out on a cookie sheet and putting it in the oven for a…
Wydruk około 4,40 €–5,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bluetti Halter für das 500W Netzteil T500 oder den Ladeverstärker Charge Enhancer D050s zum Solargenerator AC200(P/MAX), B230, B300, AC300, EP500 Das Netzteil kann ohne Schrauben zu lösen, entnommen bzw. eingeschoben werden. Am hinteren…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Outer dimensions : 113.3 x 34.75 x 53 mm Inner dimensions : 105.80 x 27.25 mm
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
The HP LaserJet MFP M140w always feeds the paper at an angle and the printouts become unusable. That's why I designed a paper guide. Simply attach the two brackets. The paper is no longer fed at an angle. The paper guide is needed twice.…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a 2U x 4U 1U high Gridfinity bin specifically for the Anker 60W 6-Port USB Charging Station ( affiliate link :) ). This model allows you to also stack more Gridfinity bins on top of the charger while leaving the charger…
Wydruk około 6,55 €–8,01 € nettoWstępna wycena jednego wariantu
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got tired of the slimq being on the ground. So, I created this to put it right next to the night stand. Two versions: one with cable hanger, one without.
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This clamshell style enclosure is custom fit to the Lizusidtsy AD310 450W 3-way passive crossover network, as found on Amazon . It's something I designed for a friend and figured I would share it here. The enclosure bottom has four M4 X…
Wydruk około 8,03 €–9,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Transport cover for portable monitor Anmite 14 A140W05T My print settings: 3 perimeters 15mm brim prone to warping -> enclosure print speed 50% & stealth mode Angle 45° to print on smaller beds.
Wydruk około 12,15 €–14,85 € nettoWstępna wycena jednego wariantu
Marvos S 80W - Dock V1 - Kit only Dock V1 - Kit + Pod Dock
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
Works in PETG but better in PA or TPU 95A
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
decidi modelar e imprimir uma peça de substituição em 3D. Funcionou perfeitamente e agora quero partilhar a solução com a comunidade!
Wydruk około 1,18 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The new M1 and M2 MacBook Air (and possibly other recent Apple devices) come with a 30W charger that does not provide a method for wrapping/storing the USB-C to USB-C or USB-C to Magsafe cable along with the charger brick. This slides…
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
Pete, very kindly skulpted these pulse rifle files to go with my full size T800 build and during our discussions I mistakenly gave him the wrong measurements. Old saying measure twice cut once. Well did I do that, No : ) I was so excited.…
Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…
10 inch rack mount for UniFi US-8-150W. Required 2 pcs. square nuts rack.
A 19-inch, 2-piece, modular rackmount for up to 3 of the Unifi U-POE-at adapters . comes in either a 3 slot or a 2 slot version for either side. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix…
Update - revised design available! I added an updated design because recently I noticed that during the automatic height measurement the M3 screws slightly touched the upper housing when the laser head was moving to the reference point at…
I wanted to build a power bank that could support the USB PD protocol so I could charge all my devices off a single battery. I ended up with this 288 W/h power bank using 16 5000mah 21700 cells in a 4s4p configuration and leveraged a 100w…
Print in any setting, insert converter and tighten it down with 4x M3 screws.
Have you felt like your Snapmaker 10W Laser Module is missing one key feature - an Air Assist System to reduce scorching when engraving or cutting? At least I have. After I saw a really cool mod by german YouTuber Raagnarix (that involved…
This is case for 4s2p package and 100W charging board from aliexpress. The power bank board works well on USBC with the PINECIL and PINECIL v2 device on 20V+. The LED display was desoldered from the PCB and glued to the housing on…
This air assist for the Longer Ray5 10W module uses only two 3M screws to hold it in place. I used some 4mm Inner, 6mm Outer air hose. I printed it with a raft to help hold it down and you don't need to use supports if your printer has…
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
3D Printable extension suitable for the D1 Pro and 20W laser head.
This is a hand-measured 3D model of the Apevia 500W ITX-style power supply, created for rough design and layout purposes. Measurements were taken from a single unit and may vary slightly between units or wattage variants. Please verify…
Mounting bracket for Creality Falcon 2 40W. Allows you to add a red light laser to the Falcon 2 2 40W to allow easier alignment. No addition screws or tape required to fit. It should be a nice secure push fit to the top of the laser…
Mit den Griffen lässt sich das Lasermodul sehr einfach bewegen. Der hohe Griff verhindert, dass der Laser an der Gehäusekante bzw. der Lichtleiste vorne anschlägt. Weiter kann er durch die Kerbe nicht hin und her rutschen. Die 20W und 40W…
It's a bit hard to get a good grip on the xTool S1 modules to move them around. I made this for my 40W (I don't know if it will fit other modules or not). It's a little tight when attaching, but doesn't move at all once it is in place. I…
This a simple enclosure for a popular powerful dc-dc step down converter from Aliexpress. Requires four M3 screws that go directly into plastic. It has ventilation holes around the heatsinks. Printed with ABS.
This is a remake of my 70 mm PSU cover for the CHENGLIANG P360W24V used in the Sovol SV06 (https://www.printables.com/de/model/341847-sovol-sv06-psu-case-cover-for-silent-70-mm-fan-and). By using a 92 mm fan, the fan speed can be further…
Update 2024-10-05: I finally got the switch and my original print didn't fit exactly right. So I made a modification to the curve of the main body holding the switch. It should work now. New photos uploaded. Remix of:…
Simple wall mount for the Unifi 60W power brick delivered with the Unifi Cloud Gateway Fiber. Works best in PLA due to it's rigidity, requires supports (tree is best) for the clips. Uses 2 3.5mm countersunk screws to fix it to the wall.…
First of all, thanks for the postings on Thingiverse of PLAY3Rone977, as well as the remixes by Crabe31350 and Spectra3D! This is a remix from all of them! After looking at these models, I saw that they need quite a lot of space (y-axis).…
This is a protective case to suit the commonly available “1200W" 20A DC Boost (step-up) Power Supply Modules (8-60V input, 12-83V output - example ). It should also fit the “1800W” variant, but this is unconfirmed. This is being used to…
Alternative to official longer3d stands for the ray5 20w laser engraver. Certainly compatible with other Ray5 models. With the base, you can fix the laser so that it's always in the same place, which is handy when you've made a grid. I've…
Another powerbank case for a popular module from Aliexpress. It is designed to be printed without supports with 0.2mm layer height. Requires 2 M3x10 countersunk screws and 2 M3x12 hex head screws. The screws goes directly into plastic.…
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
Revised version of my simple foot mount which supports alignment of the 500x500 honeycomb bed and keeps everything in the same place. Need to print 2 of each. Filenames explain which ones are for which feet My feet are positioned at their…
This is designed to fit the charger with the rubber feet attached so no modifications to the charger are required. I printed with some supports on the rounded edge, but they are not required if you're happy with rough edges.
4x M3 x 6mm countersunk 4x Threaded Inserts M3 X D5.0 - https://www.aliexpress.com/item/4000232858343.html IP2368 - https://www.aliexpress.com/w/wholesale-ip2368.html BMS - https://www.aliexpress.com/item/32808335825.html (4S 40A Balance)…
A 19" rackmount for the US-8 switch from Ubiquiti. Both parts are screwed together with a screw and nut. Glue is not needed. Is best printed in PETG or a more stable material. I have used 5 perimeters. There is a cutout for the LEDs that…
This is a simple plate that is 3.8mm thick with a little handle on one side. To use it, lower the acrylic guard down onto this plate and tighten the screws. Then the laser will be in focus for the material you are using. I'm not sure if…
This is the CAD for Framework Laptop 12 - 50Wh Battery
This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…
Wandhalterung für den Air Assist von XTool. https://amzn.eu/d/8GEQkoJ
Laser spacer (10W) to easily adjust the laser material distance. The tower is 5cm which is exactly as high as the metal spacer provided with the Longer RAY 5 but fits better into the V shape on the back. The plate puts the laser at the…
A 10-inch rack mount for up to 3 of the Unifi U-POE-at adapters . It can be a good option if you don't have a PoE+ switch for your devices. To install the adapters, simply slide them in from the front of the mount. I have also included a…
Spacer that allows me to mount my UniFi switch on a full width rack. Print instructions Printed using Slic3r defaults for .2mm Generic PLA.
I really liked the mount from user @kbiel ( https://www.thingiverse.com/thing:3208663/ ) but wanted something that is printable without supports. My remix prints fine on an Ultimaker 2 without supports. The only critical part is the…
It doesn't require any special settings, I printed it in PETG at 0.2mm resolution. It will probably fail to work if printed with a higher diameter nozzle than 0.4mm because the lip that holds the lid might not be strong enough.
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws betwen : ISO 10642 (DIN 7991) M6x20 + Square NUT M6 10x10x3 I used PETG.
I wanted to route the cables for this ( https://www.ubnt.com/unifi-switching/unifi-switch-8/ ) switch underneath. And designed a stand to do so...have fun Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer:…
This handle will help you to move the laser module on the xTool S1 20Watt laser without bumping the Z height sensor or cabling. This handle fits very tight. Hook the bottom clip on first, then slide the top clip over the module. It may be…
Whats needed to build this ? The 100W/65W DIY Power bank Modules typically available on Ali-express / e-bay etc. (Model : MYZL-YD24-2.32) 6x M3*4*5 mm Heat Set Inserts (installed on the Base to secure the Lid) 6x M3x8mm Flathead screws…
Full instructions here: https://wallnutts.github.io/projects/ Problaby the first ever 3D printed GPD Win Mini case available! Comes with detachable screw-on flat grips. The added thickness of the case, even without the grips, also allows…
Hello, to download Clutch To The Meat Grinder Zelmer Diana 1500W, it is possible that it matches other models of the Zelmer part is my production from the beginning of the planning stage to the final stage, If you want you can always…
Mount with screwholes for Baseus GaN3 Pro 4 Ports Desktop Charger 100W. I needed a simple sleeve mount so I can put the Baseus charger under my desk, where I can still easily get it out and take it with me. There's 2 versions, one which…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount the Sovol 40W laser to your SV06 & SV06 PLUS printers. You'll need: 4x 6mm M3 cap head bolts 2x 8-10mm M3 cap head bolts Print laying flat on its largest face…
This is a printed air-assist nozzle for the NEJE 30W and 40W "new style" laser modules with the amber/red window. Simply replace the window with the nozzle part and insure the lens assembly is properly fitted into the cone. Attach a 6mm…
Laser beam alignment tool for the Chinese K40 40W CO2 Laser. The tool has two parts, one for mounting on the mirror and one for mounting on the laser head. Using tape or paper to mark positions has the problem of smoke residues getting on…
This is an upgrade for the standard cooling fan included with the 500W Spindle commonly used on small DIY CNC milling machines. It prints easily and needs no supports. There is an open and a closed version, depending on personal…
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
Adapter for LG portable standing/rolling 9000 BTU AC unit, model: LP0910WNR May fit other models as well. I wanted something to replace the flimsy plastic panels included with the unit, so i made a more solid window panel with a wood…
Simple holder to attach the UGREEN charger to the wall with 2 screws.
Dvě varianty desky pro uchycení 500W vřetene s hliníkovou objímkou na CNC router Two Trees TTC450. Jedna deska pro vložení matic M5 a M6 druhá s tištěnými závity. Two variants of mounting plate to fix 500W spindle with alu collar to TTC…
The CAD file for the following motor: https://www.qsmotor.com/product/10inch-3000w-hub-motor/ 10inch 3000W Hub Motor 1) Motor Type: DC Brushless Hub Motor 2) Version: V2, V3 3) Rated Power: 3000W (maximum 6000W). 4) Voltage Range: 48V,…
I couldn't find a matching 70W charger. Fits pretty snug, but doesn't slip. If you have trouble fitting it, try scaling it up by 0.5-1% Printed with Fiberlogy Impact PLA, 60% adaptive cubic infill (probably overkill)
For MacBook Pro 14 inches 2023, 96W USB‐C - MagSafe power adapter Added versions : 61w - 67w - 70w - 140w
This 144Wh 100w USB-PD power bank is the the little brother to my 288Wh version . My main motivation was to have a large power bank that I could travel on airlines with. The TSA regulation is 160Wh max . I ended up with this 144Wh power…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
Stop loosing your Apple 20W chargers. This lock will secure your Apple 20W USB-C charger to the wall outlet. Designed to work with both decora and traditional outlets. Will need a 6-32 screw that is long enough to go through the lock and…
Bester Abluftkrümmer für deinen S1 - Seitlicher Ausgang - AD=100mm. Update: Auf Wunsch hinzugefügt, Datei für den original xTool Schlauch, welcher aufgeschoben wird: "Seitlicher Ausgang_originalSchlauch_AD74mm.obj" Konstruiert in FreeCAD…
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
case for HBV 5640 eg Voron 2.4 ---- BOM: 4x M3x10 or M3x12 2x M3x5x4 insert 3x M2x4 tapping screw to mount the cam ----
This is a simple case for a powerful powerbank module from Aliexpress and 5S 21700 battery. The assembly requires 4 small screws. The model is designed in FreeCAD. The source file is included. The supports might be needed for the screw…
Remixed spool dryer to make it compatible with 350W food dehydrator! Tested with Silvercrest and Quigg components! Made also some change to the mode: PTFE guides moved to the back; added PTFE guides to the base instead of the middle part;…
This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon…
A mount for the Unifi Switch 8 (US-8 and US-8-60W). The size of the switches this mount is designed for is: 150x100x30mm.
If you like the model, please give a like 💟 and post your prints 📸. 💡 Underware - Multiboard - Lenovo 90W Power Adapter holder (ThinkPad Universal USB-C Dock) 💡 💫 Recommendations PLA/PETG 0,2 mm layer no support
This is a case cover for the CHENGLIANG P360W24V power supply from Sovol SV06, with a hole for a 70x70x10 mm fan and a step-down converter (LM2596 HW-411). There are holes for fusible nuts (M3 with 4.6 mm outer diameter). Unlike the…
UniFi Switch US-8-60W poe 10 - Inch Rackmount, i also made this for 19 inch. There is a model with cut-outs for Led light, an one without.
KS0 Pro Stand for 230W Power Supply.
This is a 70 watt "7000" lumen dimmable LED floodlight that mounts on anything that has a 1/4" or 3/8" thread. It's a standard thread used on all kinds of camera gear, like tripods, microphone stands, articulating arms, etc. Also has a…
Print in PETG, needs around 30% infill 3 walls to make it sturdy enough.
After I made the 70 mm and 92 mm Version of the PSU fan case, I got a request for a 80 mm variant from PatrickE which is exactly this one. I did not test it myself, but PatrickE confirmed that it fits and also provided the pictures, thank…
The SK120 can be found at Aliexpress for about 10-20€. It works pretty well and can be configured to charge all sorts of batteries. It operates in step up and down mode and can generate output voltages between 0 and 36V with an input…
Honestly, this design isn't super great.
I wanted to route the cables for this switch ( https://www.ubnt.com/unifi-switching/unifi-switch-8-150w/ ) underneath. And designed a stand to do so...have fun Print instructions Category: Computer Print Settings Printer Brand: Prusa…
30w version here https://www.printables.com/model/657274 You need to print the box padding in TPU and the rest in PETG. You will also need x6 M3 screws of 20 mm of length. This is a mix-match of a bunch of models, some mine, some are…
Uses the screws and spacers that came with the amplifier board kit. Steps to assemble: 1. First prepare the top part by fastening the spacers with 4 screws on it. 2. Place the board into the bottom of the enclosure 3. Slide the top part…
Easy to print, no support needed. Installation without tools, no screws needed.
