Wyniki wyszukiwania: 13m

Sortowanie

332 modeli

P
PrintablesLuckyMenace

1/2 inch / 13mm Irrigation Tube End Plug

Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
253
Polubienia
34
Ocena
5
P
PrintablesTperroneDesign

13mm to 18mm Model Rocket Motor Adapter

This is a two piece 13mm to 18mm motor adapter. It works with Estes 13mm motors, and you can use it in lightweight rockets that use 18mm motors. Print in ABS for better heat resistance and lighter weight. Use a brim when printing. Use a…

Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu

Pobrania
175
Polubienia
28
Ocena
0
P
PrintablesRedFrez

Test Tube Cap (13mm & 16mm provided)

I got inspired to organize my electronic parts in test tubes, but wanted a better cover for them, that would eventually allow for labeling/customization. The caps provided are for a 13mm tube, 16mm tube, and the 16mm with test mmu label.…

Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu

Pobrania
163
Polubienia
4
Ocena
5
P
PrintablesMatias

NORDMÄRKE wireless charger base 13mm

This is a remix of @Czo_275430's NORDMÄRKE base that supports phones with cover up to 13 mm.

Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesLuckyMenace

1/2 inch / 13mm Irrigation Tube Bend Cap

End cap for run of 13mm irrigation tube / pipe - insert and bend pipe back over to crimp the pipe and stop water flow. Benefit of using this instead of a plug is that it is easily removable without tools (and far simpler than a valve!)…

Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesdodasch

Waterpump Festo Adapter (G1/8 to 13mm Flange)

Designed for Seven Master EB-303 Water Pump AC:220V/50Hz 10W Hmax: 1.2m Qmax: 600L/H From 13mm Flange to 1/8" Thread (for Festo Adapter) Edit : added Adapter with key width 14mm

Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
14
Polubienia
5
Ocena
0
P
PrintablesDarkBruce

Gridfinity Bin for Facom Spanner - 7 to 13mm

I have a eurobox that I used for travel, bin which are 9u height fit perfectly inside. This is my solution to store my set of “small” spanners (6-7, 8-9, 10-11, and 12-13mm) Nothing special to print, mine is using standard quality (0.2mm)…

Wydruk około 7,92 €–9,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesHolzi

Drill Bit Holder 1-13mm (Bohrerhalter) to mount on French Cleat

This is a drill bit holder to mount on french cleat or sit on the work bench. You can add drill bits from 1mm to 13mm in steps of .5mm. On the back there are already 10mm deep holes for attachment to a French Cleat holder. (there´s a…

Pobrania
2168
Polubienia
235
Ocena
4,83
P
PrintablesNiklas

Gardena Micro-Drip 1/2" - 13mm Connectors

Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…

Pobrania
1141
Polubienia
348
Ocena
5
P
PrintablesHeine Sørensen

Drill holder 1-13mm (Metric)

Note !! this is a remix however I cannot find the source any longer. The model is possible to screw to almost anything , it has a groove in the top to storrage a special size drill if needed and have 2 slots in the top for center drill…

Pobrania
1111
Polubienia
169
Ocena
5
P
Printablesbeekrbonkr

Microphone Boom Arm Desk Clamp Replacement - Scissor Mic Stand Clamp, 13mm Hole

A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…

Pobrania
980
Polubienia
91
Ocena
5
P
PrintablesShadow_964

G1/4 Barbed Fitting For 5mm to 13mm Hoses

BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…

Pobrania
870
Polubienia
275
Ocena
0
P
PrintablesEsKa11

Scratch Gauge 13mm wide ruler / Streichmaß für 13mm breites Lineal

Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.

Pobrania
806
Polubienia
266
Ocena
5
P
PrintablesFreddy-six

Gardena bend protection nut 1/2" / Gardena Knickschutzmutter 13mm

Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…

Pobrania
606
Polubienia
105
Ocena
5
P
Printablesmatej

Garden Hose Connector 1/2" (13mm)

printed from PET-G, one body and 2 nuts. For body use brim, supports not required. if you need connector to 3/4" hose then set scale factor to 130% in X and Y coordinates for 1" hose connector set scale factor 200% in X and Y coordinates…

Pobrania
556
Polubienia
67
Ocena
4,33
P
PrintablesMKE Dan

Detail Sander 13mm wide

Compact detail sander with a 13 mm sanding width , designed for precise sanding in tight or hard-to-reach areas. Ideal for fine detail work, small parts, and controlled material removal. Cut Sandpaper Strip 13 mm × 183 mm (1/2″ × 7-1/4″)…

Pobrania
487
Polubienia
98
Ocena
5
P
PrintablesKophi

13mm Flux syringe plunger

Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…

Pobrania
448
Polubienia
39
Ocena
5
P
Printablesekoscape

Aquarium filter shrimp intake (13mm & 16mm) (12 models) (Round and hexagonal holes)

Filter intake to protect baby shrimp or fish fry from sucked in. Suits any piping that are 12mm or 16mm, 1 mm holes (Round and hexagonal). Models Filter 13mm (Height 55mm) - (Round and hexagonal) Filter 13mm (Height 79mm) - (Round and…

Pobrania
436
Polubienia
70
Ocena
5
P
PrintablesWermuth3D

RIS/Picatinny Rail Riser 13mm (Airsoft)

Used it for my own Airsoft M4. Works great and it is durable!

Pobrania
389
Polubienia
97
Ocena
5
P
Printablesekoscape

Aquarium filter shrimp intake 13mm (Round and hexagonal holes)

Filter intake to protect baby shrimp or fish fry from sucked in. Suits any piping that are 13mm, 1 mm holes (Round and hexagonal), 55mm height.

Pobrania
376
Polubienia
84
Ocena
5
P
PrintablesMartin

Drill Gauge Metric 1 - 13mm

Size 1 to 13mm Fit for Measuring Physical specification: 97 x 190 x 3mm 9.7 x 19 x 0.3cm PLA or PLA+ or PETG

Pobrania
373
Polubienia
28
Ocena
5
P
PrintablesGeoff

Chunky M8 Knobs (DIN type, 13mm head or nut)

Chunky knobs made for a snug fit with M8 hexagonal bolts or nuts. Modelled to work best with normal DIN standard fasteners (13mm across flats and head height 5-6mm to 6.4mm.) Initially made for using with the partially-threaded bolts…

Pobrania
373
Polubienia
52
Ocena
4,8
P
PrintablesKrencl

Gardena micro-drip 1/2" (13mm) pipe holder

Please like model, if you are satisfied.

Pobrania
351
Polubienia
34
Ocena
5
P
PrintablesKen226

1/4 Scale Rheinmetall-Borsig MG131 13mm Machine Gun set, for model FW190

This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…

Pobrania
344
Polubienia
37
Ocena
0
P
PrintablesPrintyModels

Overengineerd 45° Led profile (13mm wide LED strip)

Hi! I designed this in my free time and would really appreciate it if you could leave a comment or share a make after printing it. It means a lot to me and gives me motivation to make more items :) Thanks! This modular LED strip bar is…

Pobrania
330
Polubienia
40
Ocena
5
P
PrintablesInvalid_Maus

Camping chair feet for 13mm leg (decathlon MH500 )

lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes 2024/10/8 update: revisiting the file because I need to print a set…

Pobrania
311
Polubienia
43
Ocena
4,5
P
PrintablesPhil-ip

Coude 90° pour tuyau Gardena noir (enterré) 13mm

Coude 90° pour tuyau Gardena noir (enterré) 13mm Permet de raccorder un tuyau de 13mm à angle droit.

Pobrania
294
Polubienia
21
Ocena
5
P
PrintablesSky

Drill bit holder 9-13mm - wall mount

I tried to find the perfect drill holder for my needs and couldn't really find something that suits all my needs. Therefore I created one myself. This design fits drill bits from 9mm to 13mm in size. For sizes 1mm to 8,5mm see my other…

Pobrania
293
Polubienia
39
Ocena
5
P
PrintablesKemet

Xiaomi Mi Vacuum Cleaner G10 adapter/regular hole/standard hole/baby aspirator adapter/r13mm

Adapter for conversion Xiaomi accessories connector to standard - 26mm diameter (13mm radius) hole. works for Xiaomi Mi Vacuum Cleaner G10 I needed it for baby aspirator. PLA, PET, PETG works just fine. Simple, easy, ready to print.

Pobrania
279
Polubienia
28
Ocena
5
P
PrintablesMKE Dan

Bow Sander Large 13mm wide

My intent was to design a simple robust bow sander that was easy to load. 166mm (6.53") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…

Pobrania
268
Polubienia
66
Ocena
0
P
Printableszz2012

Gardena Pipe Pegs 13mm

You can mount the Gardena MicroDrip 13mm system wherever you want. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Supports: No Resolution: 0,3 Infill: 70 or more Filament: Fillamentum CPE, ASA signal Category: Outdoor &…

Pobrania
268
Polubienia
38
Ocena
5
P
PrintablesMKE Dan

Bow Sander Small 13mm wide

My intent was to design a simple robust bow sander that was easy to load. 89mm (3.5") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…

Pobrania
254
Polubienia
50
Ocena
5
P
Printablesreedx

M4 Cable Mount P-Clip - 12 sizes ( 2 - 13mm )

P Clips for securely mounting wires and cables using M4 fasteners. Available in sizes 2 to 13mm outside cable diameters. Ideally printed with a flexible filament. I print mine in TPU with a high wall count. PETG may also be suitable. Band…

Pobrania
253
Polubienia
30
Ocena
5
P
PrintablesSebastian T

Gardena Microdrip 13mm Tube Holder

I used these brackets to replace the M16 pipe clamps I used to attach the 13mm tubing to the greenhouse foundation. The hole in the bottom is 4.5mm. I have printed it with PETG and 4 outer walls.

Pobrania
245
Polubienia
27
Ocena
4,5
P
Printablesreviloc

1/2 inch to 13mm barbed adapter

½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden

Pobrania
230
Polubienia
28
Ocena
5
P
Printablesirreverend

Heltec V3 Mini Case (fits 13mm antenna)

Mini case for the Heltec V3, which fits a larger antenna which none of the other mini type designs seem to. Be aware if your print tolerances aren't the same as mine you might need to sand the side where the bottom of the screen fits in.…

Pobrania
227
Polubienia
34
Ocena
0
P
PrintablesFelix Loh

13mm socket wrench, 120mm long

I have lengthened the existing version to 120mm. Ideal for installing mixer taps. Printed with PETG.

Pobrania
226
Polubienia
8
Ocena
5
P
Printablesvespaholic

Bialetti Moka Coffee Stand for 3 cup Moka 13mm stem

The original didn't fit my 3 cup model so I just resized the original up about by 1/8th so that it would fit the 13mm stem of my moka pot no other changes have been made. Original by Jayuk. Print Settings Printer Brand: Creality Printer:…

Pobrania
219
Polubienia
26
Ocena
5
P
Printableshunger

M8 (13mm) nut adapter

M8 (13mm) nut adapter. I use for mower (handle folding). I printed model from PETG. czech: Adaptér matky M8 (13mm). Používám na sekačce (sklápění rukojeti). Tiskl jsem model z PETG.

Pobrania
202
Polubienia
30
Ocena
5
P
PrintablesMAHWE

Kappe für Rohr z.B. Stuhlbein Durchmesser Innen 13mm, außen 16mm

Schützt ihren Boden vor Schrammen. Gedruckt aus PLA, PETG oder TPU je nach Anwendung.

Pobrania
201
Polubienia
10
Ocena
0
P
PrintablesTiebie

Gardena 13mm (1/2") micro drip hose stake

Soil stake for 1/2 inch (13mm) Gardena micro drip hose. Quick and dirty Tinkercad design. Constructive comments appreciated. Prusa i3 MK3s 56 min for 1 with standard slicer settings Prusa mini fits 6 (4h18 with draft settings) Print…

Pobrania
196
Polubienia
25
Ocena
0
P
Printablesdsfrancis

Multiboard - 13mm Small Thread T-Bolt

A basic 13mm small thread T-Bolt for the Multiboard system.

Pobrania
187
Polubienia
7
Ocena
5
P
PrintablesB0L1V3R

A holder for screwdrivers with 9mm and 13mm diameter

The mounts were printed with a layer height of 0.3. in PETG. No supports are required.

Pobrania
186
Polubienia
32
Ocena
0
P
PrintablesDian

13mm hose connector

hose connector. like Gardena 1514-23

Pobrania
171
Polubienia
25
Ocena
0
P
PrintablesOACDesigns

Garden Hose Quick Release Connector 1/2" (13mm)

Remix of the original model to combine with the male part of a quick release coupling lock. Watch out, the fingers are fragile and can snap off easily. Print with them facing down, with a brim. Best to use PETG for outdoor use. The nut is…

Pobrania
170
Polubienia
27
Ocena
5
P
PrintablesNiklas

Gardena to 1/2" - 13mm hose connector

An adapter from Gardena connector to a 1/2" - 13mm hose. You can use the ring seal of an original adapter but you can also print one with TPU (file included). Variant Gardena connector ½" - 13mm hose connector 1 1x 1x 2 1x 2x 3 1x 3x 4 2x…

Pobrania
170
Polubienia
25
Ocena
0
P
Printablesdiidjej

Garden Hose Y - Connector 1/2" (13mm)

Printed from PETG. Printing position as in picture with two connectors down wards. The connector “fingers” are a bit fragile and can easily snap, but if handled with care it's a very tight fit and doesn't leak. I actually had to use some…

Pobrania
169
Polubienia
39
Ocena
0
P
PrintablesPetrod

13mm Poly Pipe Clamp (remix)

If you don’t want to spend a fortune on 13mm poly pipe clamps from the store, then this is a real cost saver. It prints a useable hose clamp with a 0.4mm nozzle, but I expect it would print a much stronger (teeth-wise) item with a 0.2mm…

Pobrania
168
Polubienia
23
Ocena
5
P
PrintablesKen226

Voron Trident or 2.4 XY Bridge Cable Chain Anchor, Raised 13mm for Backers

Print using the same material and settings as the default Voron parts. Uses the same screws. I included the .stp in case someone needs it changed.

Pobrania
163
Polubienia
16
Ocena
5
P
PrintablesDanAndersen

Diffuser/Flow-Resistor for Juwel Bioflow One Aquarium outlet (13mm)

The Juwel Bioflow One aquarium filter and heater combination, utilizes an O2 diffusor which narrows the 16.5mm outlet to a 10mm “jet” to inject air into the water. One downside can be that this jet creates a strong current in the fish…

Pobrania
153
Polubienia
14
Ocena
0
P
PrintablesPhil-ip

Bouchon tuyau 13mm / Hose plug 13mm

Plug for Gardena underground pipes (or black irrigation hose) of 13mm Test for strength depending on the type of filament used and the orientation when printing the part.A horizontal print will be stronger but less accurate for example.…

Pobrania
148
Polubienia
9
Ocena
5
P
Printablesk2thestank

Nerf Dart Cutter Template 38x13mm

just print and cut simple as that! Dart Tips: please print in TPU anything else and you risk serious injury or damage to anyone or anything the tips hit. (meant to only print and glue onto the cut ends for practice or simple shooting to…

Pobrania
142
Polubienia
35
Ocena
4,5
P
PrintablesWiseone

Spanner/Wrench Carrier 03 (07-13mm)

My spanner collection inside my portable toolbox was always a mess. Each spanner dispersed in the toolbox box and hard to find. My solution to the spanner mess is to bring them together into this 3D printed spanner carrier. This 3D…

Pobrania
141
Polubienia
18
Ocena
4,5
P
PrintablesLincDaPro

13mm hinged hose clamp - ANTI KINK

I printed it on my X1C at 0.12mm high quality.

Pobrania
140
Polubienia
13
Ocena
5
P
PrintablesCmarlow

Drill Bit Tray 1-13mm

A Drill bit tray for 1-13mm bits. (25) Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PLA PLA Category: Tool Holders & Boxes

Pobrania
138
Polubienia
14
Ocena
0
P
PrintablesMateo Deal

Gridfinity Drill Bit Set Holder 1-13mm (With Raised Labels)

Added raised labels to Flash72 's Gridfinity Drill Bit Set Holder. There was no room on the 4mm, 8mm or 8.5mm slots so you'll have to use context clues sorry guys. Original:…

Pobrania
136
Polubienia
13
Ocena
5

Gridfinity Dremel polishing disk holder - 26 mm + 13mm / 1 inch + 0.5 inch

Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff

Pobrania
135
Polubienia
29
Ocena
5

APFSDS Mod for 13mm Barrel (Nerf Barrel) V4

APFSDS meaning: Armor Piercing Fin Stabilized Discarding Sabot, or: A certain type of ammunition. Directions: Print the three sabots and the penetrator, and when finished put the three sabots around the penetrator and put fins down into…

Pobrania
132
Polubienia
12
Ocena
5
P
PrintablesTommi

Hose union DN10 (G3/8") - 13mm

I have printed these from petg and pctg, and both seem to work fine. Additionally, you also need a roughly 16mm x 2,5mm (5/8" x 0,1") O-ring. PS. If you are using a hose clamp to secure the connection, be careful not to overtighten the…

Pobrania
129
Polubienia
28
Ocena
5
P
PrintablesLotfyA

Winged Socket Wrench 13mm with conversions

Introducing our Winged Socket Wrench for M8 Nuts (13mm size), a must-have tool for any handyman or mechanic. This 3D model combines convenience and versatility, making it an indispensable addition to your toolbox. Features: Effortless…

Pobrania
129
Polubienia
10
Ocena
0
P
Printablesjlovega

Modular enclosure 1/2" (13mm) PVC

1/2" (13mm) PVC parts to build enclosures or shelves Parts: pvc clip: clip to hold fabric or plastic on the tube pvc-corner: to build a door or a frame pvc-3-corner: brackets to hold the corners pvc-table: clamp for 4mm board, can be used…

Pobrania
128
Polubienia
51
Ocena
0
P

Flutted Pastry socket ( 6 tooth: 4mm, 6mm, 7mm, 9mm, 10mm and 7 tooth: 12mm, 13mm)

I just need some pastry socket to make some cakes during the shutdown. So I made a serie. I have not used all yet. Material Quantity 8g Dimensions 35 x 35 x 40

Pobrania
128
Polubienia
20
Ocena
0
P
PrintablesVousaty_

Bending mandrel for 13mm hard tubes 90 degree

Works fine with both acrylic and PETG tubing, easy to use, perfect 90 bends. 2cm bend radius.Enjoy

Pobrania
126
Polubienia
15
Ocena
0
P
PrintablesNicerSlicer

13mm 1/2 Inch End-Plug Cap (Gardena Micro-Drip 13mm)

13mm Endstück für 1/2 Zoll Leitung (z.B. Gardena Micro-Drip 13mm)

Pobrania
124
Polubienia
9
Ocena
0
P
PrintablesJ Lake 3D

13mm Reversible Ratchet Wrench

This one has not been tested yet but is using the same design as the 14mm which has been tested. I made this 13.4mm inside. Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489 More sizes to come. I…

Pobrania
123
Polubienia
27
Ocena
0

Coffee spoon for reusable capsules 8g / 13ml

I have a Dolce Gusto coffee machine and for several years I used the regular single-use capsules to make me coffee. Those capsules were not recyclable. So several months ago, I decided to try these reusable stainless steel capsules to…

Pobrania
122
Polubienia
9
Ocena
0
P
PrintablesNikki81

p clip for 13mm od 13mm flexible conduit

p clip for 13mm od 13mm flexible conduit takes a m5 bolt

Pobrania
121
Polubienia
7
Ocena
0
P
Printableszz2012

Gardena hub 13mm to 4x 4,6mm

Split Gardena MicroDrip 13mm to 4x 4.6mm. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 70 or more Filament: Fillamentum CPE, ASA signal Category: Outdoor & Garden

Pobrania
117
Polubienia
23
Ocena
0
P
PrintablesMatěj Smejkal

cover for 13mm nut

cover for 13mm nut ( originaly on top of oarlock)

Pobrania
116
Polubienia
4
Ocena
5
P
PrintablesSteven Liston

Rolling pin Spacer .5" or 13mm

Spacer for rolling pin to allow you to create .5" or 13mm thick dough

Pobrania
116
Polubienia
4
Ocena
0
P
PrintablesBREACHERCAT

Bambu Lab X1C / X1 Touch Screen Low Mount V2 (Drop 21mm or 13mm)

Currently, the files are V2, the description will be updated ASAP This mount lets you lower your screen and provides more clearance on the top side (level with top glass or handle). It offsets the mounting point 14mm outward, then 21mm or…

Pobrania
114
Polubienia
24
Ocena
0
P
PrintablesBasementLAB

Greenhouse film outdoor Clip Ø 10/12/13mm - Molletta fermateli serra da esterni

Greenhouse Outdoor Pole Clip Ø 10/12/13mm - Molletta fermateli serra da esterni Greenhouse Film Clear Polythene Plastic Sheeting Garden DIY Material Cover Greenhouse Roof Resize to adjust dimension If you download/enjoyed this file,…

Pobrania
114
Polubienia
14
Ocena
5
P
Printableshjembaek

Allen (Hex) Key 11mm, 13mm, 15mm and Screwdriver with 15mm Allen (Hex) Key shank

Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…

Pobrania
114
Polubienia
2
Ocena
5
P
PrintablesRowan

13mm Pipe Clip

Simple clip for 13mm poly garden pipe

Pobrania
112
Polubienia
14
Ocena
0
P
PrintablesCdR

Gardena Master Unit 13mm adapter

Simple to print without supports. PetG preferred.

Pobrania
111
Polubienia
8
Ocena
0
P
Printablesmxp

Foot switch topper adapter 13mm-10mm

Use 10mm toppers on 13mm foot switches, like on the TC electronic Plethora guitar pedals.

Pobrania
110
Polubienia
12
Ocena
0
P
PrintablesKrencl

Gardena micro-drip 1/2" (13mm) pipe holder with socket for drip / spray nozzle

Please like model, if you are satisfied. As main holder use long version of model. Short version is getting from land easily, but is usable as balancer. Socket compatibility checked with: Gardena Adjustable Endline Drip Head (1391-20)…

Pobrania
109
Polubienia
22
Ocena
0
P
PrintablesIMu

iPhone12mini/13mini case

This is a case for iPhone12mini. When printing, please print "iPhone12 mini_bumper" and "iPhone12 mini_back plate". Depending on the model you are using, some processing such as shaving with a file may be necessary. It can also be used…

Pobrania
108
Polubienia
5
Ocena
0
P
Printablesm_collectable

Hanging Slip Over Hook J Shaped - Sizes 12mm 13mm 14mm 15mm 16mm - for Door Cabinet Shelf Wall

A basic J shaped hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to 16mm.…

Pobrania
106
Polubienia
23
Ocena
5
P
PrintablesBoos

13mm description clip for Customizable Benchy Shelf

I printed some of the original clips and noticed, that my label printer stickers won't fit them. So I enlarged the original 10mm ones to 13mm for a perfect fit.

Pobrania
106
Polubienia
35
Ocena
5
P
PrintablesHJ Visions

HJV Hinge 13mm

These hinges are made for acrylic door. I designed parts for IKEA Lack enclosure and it needed hinges, where doors are 13mm depth from feet surface. Measurements: Height: 50mm Width: 60mm Holes: 4,5mm Countersink: 8mm Female part depth…

Pobrania
105
Polubienia
13
Ocena
4
P
PrintablesGrumpyTanker

13mm ID Cable Clip for 2020 Extrusion

All the cable clips I had downloaded were too small. I'm using some woven flexwrap around my cables, so they're a bit fat. This clips into the extrusion channel. Not super tight, but not loose either. 13mm inner diameter, 16mm outer…

Pobrania
104
Polubienia
9
Ocena
0
P
PrintablesJack Bailey

Metric Socket Holder (5mm - 13mm) for HSW

Holds 9 sockets, 5mm to 13mm, with 3 inserts for the HSW.

Pobrania
104
Polubienia
13
Ocena
5
P
PrintablesLukas

8-13mm Hose Adapter

Story: I needed to connect the hose of my mini pump to a regular 13mm hose to be able to attach a Gardena quick connector . After the first version, I have added some chamfers so you can print without any support. If you have any trouble…

Pobrania
103
Polubienia
16
Ocena
0

AIO comb for Lian Li 13mm tubes

AIO comb to fit Lian Li 13mm hoses.

Pobrania
102
Polubienia
10
Ocena
0

Mini keychain 10mm and 13mm wrench

The mini keychain wrench for 10mm and 13mm nuts or bolts

Pobrania
100
Polubienia
6
Ocena
5
P
PrintablesMercys Artworks

Self designed body for Axial SCX10 313mm

I play a little with the thinkercat and designed a body for an Axial SCX10

Pobrania
99
Polubienia
12
Ocena
0
P
PrintablesFizzio55

Acoustic wall panel shelf for 13mm gap between vertical slats, and 13mm slat depth.

I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm…

Pobrania
98
Polubienia
25
Ocena
5
P
Printableszz2012

Gardena Connector G1 to 13mm

Allows you to connect the Gardena microdrip 13mm system to an electric water valve. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: Yes Resolution: 0,2 Infill: variable Filament: Fillamentum CPE, ASA…

Pobrania
96
Polubienia
12
Ocena
0
P
Printablesirohlfs

Gardena Microdrip (MDS) 13mm Connector

Connector for 15mm Gardena MDS Pipes. 2 O-Rings are needed. (9 mm x 1.7mm)

Pobrania
95
Polubienia
14
Ocena
0
P
PrintablesOK3D

Filament Spool Wall Mount/Holder/Rack - VAROE Remix 13mm

This is a remix of @VAROEsolutions model to use 13mm dowel Instead.

Pobrania
94
Polubienia
6
Ocena
0
P
PrintablesEd Brentnall

Multiboard Ryobi BCL14181H charger 13mm Flat T-bolt mounting bracket

This is a sturdy Multiboard mounting bracket for a Ryobi single battery charger (model BCL14181H). The battery charger has mounting holes 105mm apart and the posts on this model, although small, are just about strong enough to hold it if…

Pobrania
93
Polubienia
8
Ocena
5
P
PrintablesNeso

13mm inner fender nut

Plastic nut for mounting inner fender. Inside diameter - 4mm Rim diameter - 30mm Wrench size - 13mm Infill - 100% Inside hole may need to be drilled

Pobrania
91
Polubienia
16
Ocena
0
P
PrintablesAngleartig

Cranked Drill Bit ø13mm Gekröpfter Bohrer

ein kleines Spassprojekt. Mit diesem Bohrer ist es möglich den Kopf der Bohrmaschine beim Bohren auszugleichen Viel Spass beim ausprobieren.

Pobrania
90
Polubienia
12
Ocena
0
P
PrintablesSpegelius

Cable tray (30mm x 13mm)

So couple of years ago I got fed up with various ethernet cables around the house and decided to do something about. I already had few bits and pieces of cable trays I had purchased from hardware store, but since the only option for…

Pobrania
89
Polubienia
19
Ocena
5
P
PrintablesGarrett Kinsman

CalThermo 13mm Wrench

13mm wrench for polymer bolts! Printed in Glass filled Nylon with a large brim for success

Pobrania
88
Polubienia
7
Ocena
5
P
PrintablesDario Cairoli

Bosh Professional PointTeQ Set 1mm to 13mm inlay for Quick Setup Drill Depth Guide (no tools required)

This is an inlay for Bosh Professional 1mm to 13mm Drill Bit PointTeQ Set. It accepts Quick Setup Drill Depth Guide by Highrise Workshop.

Pobrania
88
Polubienia
22
Ocena
0
P
PrintablesPascal.p

Gardena 13mm hose clip

Print in ASA for outdoor use. you might get away with PETG or even PLA, but PLA will bend in the summer if in direct sunlight.

Pobrania
87
Polubienia
7
Ocena
5
P
PrintablesMrStolarsky

Gridfinity for Wera Sockets 5.5, 6, 7, 8, 10, 12, 13mm

This Gridfinity holder is designed for the seven 1/4" sockets from Wera Tool-Check with 5.5, 6, 7, 8, 10, 12, and 13mm sockets. It takes 1x3 space on the grid. I have another design for Bicycle Tool-Check with spaces for 5.5, 6, 7, 8, 12,…

Pobrania
86
Polubienia
19
Ocena
5
P
Printablesgipegope

Porsche 997 windshield wiper cap 13mm

911 997 windshield wiper cap to cover up the 13mm hexagon head screw High fidelity, for a clean font print with 0.2 nozzle

Pobrania
86
Polubienia
10
Ocena
0