Liczymy pasujące modele…
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Audio reel 7" - 3 part model, easy to print and glue toghether.
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
Card holder for Paleo cards. The base game includes 1-5 and A-J. The original model by Andun_HH did not fit on my PrusaMini print bed, so I changed it up (while also reducing overall volume and making labels easier to read): basic_1-5_A-J…
Wydruk około 7,03 €–8,59 € nettoWstępna wycena jednego wariantu
PDW conversion kit for cyma cm030 (glock 18c) with retractable stock. I used a 8.5mm fenolite tube as stock tubes, but you can use metal rods. Just remember to make slots for the catch lock the stock. The assembly uses a few M3 screws and…
Große Schneeflocke mit Aufhänger für euer Fenster oder Wand. Die tatsächliche Größe seht ihr auf dem Bild. Die erste Schicht am besten sehr langsam drucken, damit alle Rundungen ordentlich am Druckbett haften. Meine Einstellungen (nur als…
Milwaukee charger holder with holes for wood screws. Works with 102mm spacing Sunlu PLA+ 4 walls 25% infill printed standing supports needed
Fishing lure / mold 18cm nymph for predator fishing 6mm screw hole Enjoy
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
This is a polygon design plant pot with a saucer. The inner diameter is approximately 175mm and the height is about 170mm . It is quick to print as the outer shell is 1.2mm thick, requiring 3 perimeters with a 0.4mm nozzle and 2…
Imprimé en PLA à 40% pour être sur de ne pas déformer le moule. Pour plus de détail en 0.12
Paramètres d'impression Marque de l'imprimante : creality Imprimante : ender 3 V2 Radeaux : Non Prend en charge : Oui Remplissage : 50% Marque de filaments : filament prima Couleur des filaments : blanche Matériau des filaments : PLA
Edit: 30Oct20 - Found a great monitor/screen for this MFD (since it's bigger than the TM Cougar MFD's) cheap and minimum wasted viewing area https://www.aliexpress.com/item/32325920866.html?spm=a2g0s.9042311.0.0.5c074c4dyytB9m Edited:…
I'm excited to introduce my latest creations: two new holders for Dolce Gusti coffee cups – one large and one medium. Large: With a height of 220mm and a capacity of 36 cups. Medium: With a height of 111mm and a capacity of 18 cups. For…
Thanks to Just Joshi for this original part. The Shelf has a depth of 18cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. For the 76cm Skadis board you take 2x 18cm + 2x…
The bit holder lets you store up to 4 bits, it clips on very firmly onto the tool. Prints easily without any supports needed.
Hello, My original flexi hose ran away and I had this hose left over from another job (see specs in image) so got some ends made up to be able to use with the vac, one part is the internal part to go inside the crevice / floor tool and…
This Adapter can be glued with double sided Tape onto the Saw and allows you to use any Festool compatible Track e.g. Youtool Tacks. The Model is split to allow for printing on smaller (Mini) Printers. The Slot for the Track is very Tight…
Outer barrel for Airsoft we glock 17/18c for 3d printing or machining
Just made a improved version of the default motor cover for a airsoft cm030 cyma g18c electric pistol. Made with a loop for secure the pistol and a cover to avoid dropping the magazine during the game.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
This model was designed to raise the height of a Kallax-style unit by 18cm to allow for a robot vacuum and dock to fit neatly underneath. It comfortably provides sufficient clearance for a Roborock S8 dock. It comes with three holes per…
Since almost everybody in my team got a G18c (cm.030) I wanted to tune mine optically. The result is this picatinny rail for mounting a red dot or a reflex visor (ca. 22 mm). Even if you don't want to mount a special visor on the rail you…
A modern and simple 13x18cm photo frame with the option of a standing mount or a wall mount. Easy one screw assembly (any pan head no. 2 or no. 3 screw 8-10mm long). The frame on the pictures was printed with 0.28mm layer height and 10%…
A light and thin 3D print Photo Frame that can be mounted on the wall or placed on the table. All parts can be printed without support, 30% infill is recommended for the body, and 60-80% infill for the stand parts(PhotoFrame-parts.stl).…
This is my design and contribution to the DIY flight simulator community. The part files include the following: The 3 parts required to assemble the UFC (room for 21 keycap buttons, 6 automotive buttons, and 3 potentiometers) A one-piece…
Intro This is a fun micro frisbee designed to be super compact and lightweight, yet it flies surprisingly well for its size . At only 18 cm in diameter, it’s perfect for printing on any 3D printer — even smaller ones like a Prusa Mini or…
Sliced the model to fit the printbed of 18x18x18cm. Remember to print the pin horizontally on the bed, otherwise it will be too weak and snap easily.
a center marker for woodworking or any other ideas that you can think of! new and improved for precision and accuracy! Print Settings Printer Brand: FlashForge Printer: Adventurer 5M Rafts: No Supports: No Resolution: .20 Infill: 15%…
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
Verwendung Das ist ein F/A-18C IFEI Panel das ich modifiziert habe aus dem Projekt Open Hornet. Es wird in PETG gedruckt mit eine Layerhöhe von 0,2 oder 0,3mm. Für das funktionieren wird DCS World und das DCS Bios verwendet. Die hardware…
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
These parts are designed for the FreeWing Fa-18C 90mm EDF. These are scale parts to replicate the forward fuselage vents, louvered vents and antennae. You MUST preform ‘foam surgery’ for many of these parts which will violate MotionRC and…
To secure the feets in place you can use hot glue in the grooves on the top
18cm wide spatula for wide prints. there is no logical reason for this to exist.
The G18c (cm030) is a really nice airoft AEP, but in a fast combat its really hard to aim very precise. Since we are often playing CQB with 0,5 J only and I don't want to buy a gun above 100 € with 0,5 J I decided to create a fore grip to…
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…
Material sparende Rampe für die Türschwelle
Replacement Gear part for Aurora AS1018CD Paper Shredder that i've made to a friend Print Settings Printer: HyperCube Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 50% Category: Parts
Made me a bit holder for my Ryobi driver. Might also fit other models, but I can't test since i don't own any atm :)
Dog bow stand to enable medium to large dogs to eat more comfortably, letting their neck have a more relaxed posture Here you can see my puppy getting taller and having her neck aligned to her shoulders while eating. As she gets taller i…
A cookie-cutter for 18cm diameter ceramic flower with 6 petals
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "Trident or a Star" and a diameter of 18 cm. I would like to point out that this is a…
Guide rod for Airsoft we glock 17/18c recoil spring for 3d printing or machining
This is a closable insert for 18Chesapeake. This insert has lids for vertical storage and is designed for quick setup: just put the inserts on their respective places on or near the board. The stock trays fit on the board, and the tile…
Un petit pied de 18cm pour réaliser par exemple une tablette de canapé pour l'ordi. Impression en PLA ou PETG à votre guise en 0,2mm par exemple avec un peu de remplissage pour la solidité (30-40%). Attention , le pied n'est pas…
These missile rails are an option for the Freewing F-18C Legacy Hornet 90 mm EDF. These screw onto the wingtips in the OEM location. I drilled and tapped the OEM mounting holes to fit 2-56 Nylon Countersunk screws, but you can use…
You'll need the two files - the inner-tabs STL file and the outer-tabs STL file. These two pieces latch together in a bayonet-style mating to form the reel. Haven't tried with other versions of the reel-less filament products, but this…
First layer test model for A1 Mini or any printer with 18x18cm build plate. Model drukuje sie niecałe 20 minut na A1MINI,więc to mało czasu a można sprawdzić swoją pierwszą warstwę.
Recoil spring stop for Airsoft we glock 17/18c/19 for 3d printing or machining
This is a storage solution for the 18xx board game 18Chesapeake by All-Aboard Games. The box holds 2 trays, one for the yellow tiles and one for the green tiles. The brown and grey tiles fit in the bottom of the (printed) box. The lid…
This 18cm turntable is designed to fit in most printers. It uses 608 bearings (22mm outer diameter, 8mm inner diameter, 7mm height). For heavy items, it has additional supports to minimize wobble. One side has 1x1 cm grid, another one 1,…
I needed an airbrush turntable for a project. Even though relatively lightweight, I wanted more stability for the platform so used two 608 bearings instead of just one. I also did not want to worry about getting an exact fit and fine…
Heavily influenced by https://www.printables.com/model/121813-simple-9cm-bracket-shelf
10 & 5 Slot Resistor Box / Tray. 18cm x 6.8cm. I use a wide rubber band to close the lid on the small ones. Have not made lid for larger size yet.
Nozzle valve for Airsoft we flock for 3d printing or machining
Holder for recoil spring for Airsoft we glock 17/18c for 3d printing or machining
Printmaterial: PETG Settings: 15% infill 0.25 mm layerhight Supports: Yes, as shown in the picture Printer: Prusa mini + Printtime: ca. 3h 30min ------- HAPPY PRINTING :-) ------
I remixed the AEG/Rigid 18v Blower Round and Horizontal Nozzles to fit the other version of the blower. They may be a little snug at first but place them on and off a couple of times and they are good to go. Printing details Printed using…
Print this and a mirror version. Printed with PETG and 3 perimeters.
Keep the original springs, screw and outside piece. Print at 0.2mm layer height without supports. After printing cut out the sacrificial layer at the hex hole and the small wall on the outside as shown in the image.
To go with maddthom's beauty UFC here: https://www.thingiverse.com/thing:3586017 the 7 buttons from the bottom part of the UFC Category: Video Games
Info: simple 18cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
This is a holder for two Peugeot spice mills. Intended for the use of two mills in the 18cm Version. It will probably also fit any other brand of spice mills up to a diameter of 60mm. two Versions, with and without my Logo
18CZ Storage Solution This is a set of prints for in-box organization and storage of the 18xx Boardgame 18CZ BGG Link . The tile trays are probably the most useful, but I decided to go completist for this one. The token tray is nice in…
Ryobi-R18CPS RYOBI ONE+ VERKTYGSHÅLLARE
This is a sideways hook style mount for the Ryobi R18CSP Circular Saw, it allows you to mount it to the wall. I store the batteries seperate, however it will take the battery weight as well Mounted with standard No.8 screws
The Spot To Place The Sticker Does Not Align With How Much Filament You Have Left(For Everything Other Than V4) A custom filament spool Works the same way the reusable bambulab ones do and should work with them too however this is built…
Info: simple 18cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
My wife threatened to go to a store to get a vase, so I made my own.
Holder for Airsoft we glock 17/18c nozzle valve for 3d printing or machining
Toshiba T-318C-2 FAN air cooled Raspberry Pi 4 Case. It support VESA75. Parts for builld M3 insertnut * 6 M3 capbolt 0.8mm * 4 M3 capbolt 0.5mm * 2 Toshiba T-318C-2 FAN https://akizukidenshi.com/catalog/g/gP-17509/
Simple ruler for school or office use. There are 2 versions each with 3 files: “18cm ruler.stl” or “18cm ruler v2.stl” is a complete ruler, which can be printed as is or colored by yourself if wanted. "18cm ruler body.stl" and “18cm ruler…
EN: Suction adapter to connect a Bosch hoover with Click&Clean connection directly to the 3018CNC. DE: Absaugadapter um einen Bosch Staubsauger mit Click&Clean Anschluss direkt an die 3018CNC anzuschließen. Parameter: Material: PETG or…
best one ever made
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
Update 10/08/25: Changed upper thread direction to left-hand.
A replacement latch piece for an AEG cordless drill case, specifically from a BS18C2X, but might possibly fit other ones. Much tighter than the original one! Printing: put on the flat side and use a flexible material like PETG with…
Sophie – Elegance in Every Curve Transform your space with Sophie – a beautifully designed straight ribbed vase that combines functionality and style. Optimized for quick and easy 3D printing, this model is perfect for showcasing your…
This is an Internal Chassis replacement for the wide "pizza-box" style Apple Macintosh computers from the 90s that included an internal CD-ROM drive. Specifically, this part is for the Centris 610, Centris 660AV, Quadra 610, Quadra 660AV,…
This is a Handle for the Starrett 18C, which has a relatively high actuation force. Due to the slim profile of the 18c, repeated actuation can lead to a sore hand or reduced marking accuracy because of such a small contact surface with…
a set of 3 tile trays for 18CZ. Alternatively you could print 3 of the small trays and one medium tray for more tile locations and still fit in the box. Trays are designed with places for magnets and steel plates to be inserted to keep…
a simple, 18cm embroidery hoop - to hold fabric while you darn/embroider it, etc. It may seem thin, but it works very well, take it from me as I have used it several times on thick work trousers, tightening it almost all the way and it…
14mm ccw threads for most tracers and suppressors print orientation as it is in the last slide (adapter 45 degrees for strength) I printed it in the Prusa .20 structural setting
Nocing really fancy, I needed a frame reducer for my 8x10inch camera to get 13x18cm pictures. So I designed it in Fusion 360 and here is the result. I'm making wetplates by the way, so I don't think this could fit for film unless you make…
Base and tower to put LEDs in an 18cm Voronoi lamp. LED strips can be wrapped around the center pole, and there is a slot for the wire. The Cover goes on top of the Base and hides the wires form the holes near the base of the lamp. Print…
Thanks to Just Joshi for this original part. The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. !!! Attention: You need a big printbed to print…
Work in Progress (WIP) This is my version of the original Wurst enlarger by @sovograf ( https://www.thingiverse.com/sovograf ) , redesigned for 3D printing. Many thanks for making the original project available and inspiring this…
Stand for a square flower pot. Bottom dimensions: 18x18 cm, top dimensions: 22x22 cm.
Replacement housing for the PCB module of the Milwaukee M18CHX ( 2712-20 in US ) rotary hammer. The original part is potted in epoxy resin and cannot be reused once opened — this print replicates the protection box and is designed to be…
Model Name: Flag Mount for 18cm Beam Summary: This bracket can be placed on top of an 18cm beam and mount 2 flags with pole diameters of ~23mm. Main Category: Mounting Description About this model: This project was made to allow my school…
This is an adapter ring that fits the included desk mount of the shure MX418C. Our previous speaker mic had a way bigger desk mount, so when we upgraded to the Shure MX418C the included desk mount did not fit. Since i want to keep the…
This was designed to make this Temu caulking gun into an extruder for clay and pottery work. The tube on the Temu gun is longer than the reach of the Ryobi, so I have included a spacer to “reset” and continue once the Ryobi has reached…
