Wyniki wyszukiwania: 1x1

Sortowanie

971 modeli

P
PrintablesBodo

1x1 units, full height, 1x1 grid Stackable Insertbox Auer

Stackable Insertbox 1x1 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…

Wydruk około 2,04 €–2,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
262
Polubienia
12
Ocena
5
P
PrintablesSimon Lundell

gridfinity 1x1 bin vase mode repeated print

LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely. Attached is a hand crafted…

Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu

Pobrania
211
Polubienia
51
Ocena
5
P
Printablescaveduck

End mill tray 1x18 layout for 3/8 shank x 3-1/4 long double-ended

Modification of TaylorsMake's end mill tray (from TV) to hold bare US standard 3/8" shank x 3.25" long double-end mills. The mods are: Higher density single-row layout holding 18 tools without the individual plastic cases Thicker…

Wydruk około 4,23 €–5,18 € nettoWstępna wycena jednego wariantu

Pobrania
88
Polubienia
14
Ocena
0
P
PrintablesJimleeQ

Gridfinity 1x1 SG90 servo mount or storage

A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…

Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu

Pobrania
83
Polubienia
19
Ocena
5
P
Printablesgskollnau

Bonsai pot 15 round curved flat (mame) 131x131x41mm

Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesDusBus

Gridfinity - 1x1 - 2x Staedtler rasoplast erasor holder

Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.

Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesCollin Barker

Tap Set Holder Gridfinity 1x1

This is a Gridfinity cube to hold a cheap tap set from amazon https://www.amazon.ca/dp/B0B2LPV3BS?psc=1&ref=ppx_yo2ov_dt_b_product_details

Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
34
Polubienia
10
Ocena
0
P
PrintablesIZ Labs

Makera Z1 Clamp Storage - Gridfinity 1x1x4

A simple 1x1x4 Gridfinity Clamp Storage Bin for the Makera Z1 Fits both the Makera top clamps and the Makera side clamps

Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesNoWarrenty

Gridfinity Screw Measure Tool, 1x1 Mini Edition

There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…

Pobrania
2962
Polubienia
893
Ocena
4,96
P
PrintablesJerrod H

LEGO Flower 1x1 (24866) for Giant LEGO Wreath

A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…

Pobrania
2785
Polubienia
1225
Ocena
5
P
PrintablesMatthew

Gridfinity Deep 1x1 Bin

This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…

Pobrania
2696
Polubienia
432
Ocena
5
P
Printablesidenny1

Gridfinity Micro SD card holder 1x1x3 (added step file)

This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.

Pobrania
2243
Polubienia
206
Ocena
4,76
P
PrintablesFanBlox Company

REWORK Articulated 1x1x1x1 Roblox Figure (Classic and Forsaken)

1x1x1x1. with extra parts to make Forsaken 1x1x1x1. Print in PETG with tree supports for best results (In my opinion). UPD 1/13/26: Remade face to be more accurate. Added old face to Extra parts. Added full Forsaken version parts. UPD…

Pobrania
1444
Polubienia
70
Ocena
4,75
P
Printablesame

Gridfinity 1x1 lid

OpenSCAD model to build a 1x1 lid for gridfinity storage. From the model you can see the dimensions of the gridfinity base, and that the model is trimmed all around by 0.25mm within the 42mm grid.

Pobrania
1144
Polubienia
148
Ocena
4,9
P
PrintablesMichael Jones

1x1 Gridfinity 9 SD + 4 MicroSD Card Holder

1x1 Gridfinity 9 SD + 4 MicroSD Card Holder for storing memory cards. I couldn't find one that was quite the size and shape I wanted, so just made my own. Found this useful stacked on top of another simple 1x1 bin in my drawer.

Pobrania
1048
Polubienia
258
Ocena
4,4
P
PrintablesDavid Gadling

Gridfinity Glue Stick Holder - 1x1x1

This will hold anything with a diameter ≤ 27 mm and height ≥ 36 mm in a 1x1 gridfinity square. For example, an Elmer's washable school glue stick fits really nicely! This was inspired by the other model but: taller to handle the stick…

Pobrania
1010
Polubienia
80
Ocena
4,93
P
PrintablesJorge

MMSS 1x1 Module - Nozzle Wiper

This module, for 4 Nozzle Wipers , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. Pre-made modules, here there are several, and many are…

Pobrania
957
Polubienia
56
Ocena
4,81
P
PrintablesBenBreaksThings

Gridfinity 1x1x3 SD Card Caddy (no magnets)

Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.

Pobrania
929
Polubienia
133
Ocena
4,92
P
Printablesidenny1

Gridfinity AAA Battery 1x1x3 or 2x1x3 (added step files)

Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.

Pobrania
917
Polubienia
54
Ocena
5
P
Printablesandrepadua

Gridfinity 5U Tall Bins - 1x1 to 5x5

I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…

Pobrania
885
Polubienia
314
Ocena
5
P
PrintablesLandon Campbell

1x1 Short Vase Mode Gridfinity Bin With Magnets

I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…

Pobrania
818
Polubienia
79
Ocena
4,67
P
Printablesidenny1

Gridfinity USB A & C holder 1x1x3 or 2x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.

Pobrania
753
Polubienia
109
Ocena
4,86
P
PrintablesFudge

Lego Brick 1x1

Lego Brick 1x1

Pobrania
741
Polubienia
25
Ocena
5
P
PrintablesTailS MeDiA

V3.1 Gridfinity Big/Small Parts Project Tray W/ 1x1 Screw Bin, 63 Slot Grid Magnet Tray & Stackable Lid

UPDATE Version 3.1: updated the fillet on the inside of the small squares to make grabbing screws easier. Version 3.0: I have included 2 models that use a 63 slot grid for ultra small magnets. One of the 2x2 trays has the grid embedded if…

Pobrania
691
Polubienia
124
Ocena
5
P
PrintablesMushbrandon

Gridfinity 1x1 Sidecutter and Tweezer Holder

This is a 1x1 Gridfinity container used to store a single pair of side cutters and a single pair of tweezers. The side cutters shown in the picture and used to model the slot within this container can be found here . This model was…

Pobrania
680
Polubienia
77
Ocena
4,8
P
PrintablesTomie M

BIC Lighter Holder Gridfinity 1x1

Gridfinity 1x1 5U height. The v2 version has a slightly improved tighter tolerances and an updated design (chamfers to easily slide in)

Pobrania
638
Polubienia
61
Ocena
4
P
Printablesbulbasaur0

Gridfinity 1x1x3 combo bin and micro SD card holder

This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.

Pobrania
638
Polubienia
84
Ocena
4,7
P
PrintablesJW Designs

GRIDFINITY - 1x1 - 16 Hex-Bit Organizer

I designed this hex bit holder as none were quite how I wanted them. This organizer holds a total 16 Hex-Bits. I also designed a 1x2 Gridfinity 32 Hex-bit Holder that can be found here! Has holes for magnets and can be stacked on top of…

Pobrania
635
Polubienia
83
Ocena
5
P
PrintablesMrViddy

Caseoh 1x1 Lego Piece

Face was Painted with Acrylic Paint And clear coated. 118mm x 80mm 5 Pieces Super Glue Required STEP 1: Add Glue, and line up then secure in Place. STEP 2: Add Face, then secure with glue. FINAL PART: add head, then secure with glue 95%…

Pobrania
630
Polubienia
26
Ocena
0
P
PrintablesAndreas Mass

Gridfinity 1x1/1x2 bin 2x divider Add-on for cases

2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…

Pobrania
600
Polubienia
199
Ocena
4,88
P
PrintablesTim

lego technic 1x15 liftarm 6321716

obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…

Pobrania
593
Polubienia
54
Ocena
5
P
PrintablesAeolus

Dremel | Gridfinity | 1x1 Organizers

A set of organizers for Dremel paraphernalia. I use them to organize my dremel's bits and bobs on the tiered gridfinity base plate .

Pobrania
591
Polubienia
138
Ocena
5
P
PrintablesJorge

MMSS 1x1 Module - MicroSD

This module, for 4 microSD's , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. You can see in the context, with the specially designed MMSS case ……

Pobrania
583
Polubienia
50
Ocena
5
P
PrintablesTailS MeDiA

Gridfinity Big/Small Parts Tray W/ Removable 1x1 Screw Bin & Stackable Lid

UPDATE: I have created screw bin holders in 2x2 grid sizes for plates and other bigger parts as per my field research data. I’ve also created 1x1 lids for the screw bins! The big parts tray has 3 xrta small slots, 2 small slots, one…

Pobrania
574
Polubienia
83
Ocena
5
P
PrintablesPDub

Gridfinity 1x1 Apple Watch Charger

This is a remix of the Apple Watch Charger Stand from Mate0126 and the Gridfinity Block template from Filip Kolinsky. This is part of my EDC / Dresser Valet series that I'm creating. If you're not familiar with the Gridfinity system from…

Pobrania
552
Polubienia
52
Ocena
4,57
P
Printablesscheff

Gridfinity 1x1 Battery Storage CR2032 & CR2430

Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill

Pobrania
539
Polubienia
53
Ocena
4,5
P
PrintablesStewart Copland

1x1 Gridfinity SD and USB holder

Based off of Marius' design but with a 1x1 footprint. Marius' design was remixed from a desk organizer from DRDflow. Each slot holds either : 3 micro SD 1 regular SD 1 USB A 2 USB C (may collide with walls if the device is too large) This…

Pobrania
526
Polubienia
47
Ocena
4,64
P
PrintablesKagarov

Concrete modular fence of the USSR PO-2 m:1x100

The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…

Pobrania
515
Polubienia
93
Ocena
5
P
PrintablesFudge

Lego Plate 1x1

Lego Plate 1x1

Pobrania
511
Polubienia
19
Ocena
1
P
Printablescmsj

Gridfinity 1x1 AirPods Pro box

Gridfinity is life, gridfinity is power. I'm converting my office “quick grab stuff” cupboard to gridfinity, which means I needed a holder for my AirPods Pro case. Other airpods gridfinity options exist, but they typically mount the case…

Pobrania
503
Polubienia
49
Ocena
4,83
P
PrintablesGigaBagel

[OUTDATED] Forsaken timeless 1x1x1x1 articulated figure

This is the “timeless” 1x1x1x1 skin from the asymmetrical horror game forsaken. Print this model in PETG for longest lasting joints, but you can print in PLA if you are okay if they loosen over time. You can paint this model if you want…

Pobrania
495
Polubienia
27
Ocena
5
P
PrintablesTreba Ales

CaseOh like a 1x1 Lego piece

CaseOh figure, but like a 1x1 Lego piece

Pobrania
470
Polubienia
22
Ocena
0
P
PrintablesRaphi

Lego 54200 (1x1 Slope)

The Lego piece 54200

Pobrania
461
Polubienia
9
Ocena
0
P
PrintablesEdGJr

LEGO 1x1 Plate Vertical Clip 2555

LEGO 1x1 Plate Vertical Clip, part # 2555

Pobrania
447
Polubienia
11
Ocena
5
P
Printableshardiebotha

Gridfinity supportless 1x1 bins, stackable basic or with label or ramp.

Gridfinity is a storage and organizer system introduced by YouTuber Zack Freedman in this video. In this video, he outlines the specifications, with a good bit of documentation of the Gridfinity standard published on http://Printables.com…

Pobrania
443
Polubienia
27
Ocena
5
P
PrintablesBaGooN

Gridfinity 1x1 Bins – Snap Lid

This is a bin compatible with ZackFreedman’s Gridfinity . Designs are available for both vase mode printing and solid printing. Notes: The minimum vase mode printing settings use a 0.4 mm nozzle with an outer wall width of 0.6 mm. In my…

Pobrania
433
Polubienia
184
Ocena
4,5
P
PrintablesKevin Barker

Gridfinity Base Risers/Spacers (1x1)

Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…

Pobrania
410
Polubienia
75
Ocena
5
P
Printablesgiobber

Gridfinity CR2450 Battery Holder 1x1x2 (with various tolerances)

I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…

Pobrania
407
Polubienia
34
Ocena
5
P
Printablestheflow.fr

Gridfinity simple bin 1x1x6

here's a simmple gridfinity bin

Pobrania
401
Polubienia
23
Ocena
5
P
Printableshardiebotha

Gridfinity supportless 1x1 bins with label and ramp.

I modeled some Gridfinity bins which will allow magnets to be press-fitted. I added an internal ramp like I've had in some bins I've downloaded in the past which is very helpful in getting small parts out of the bottom of the bin. Keeping…

Pobrania
401
Polubienia
30
Ocena
5
P
PrintablesVLAD MARIUS

LEGO Round Flat Tile 1X1

This is a LEGO Round Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 4646844, but it does not need to be white.

Pobrania
399
Polubienia
15
Ocena
0
P
PrintablesWilko

Cookie Cutter Heart (1x1)

We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) The…

Pobrania
392
Polubienia
70
Ocena
5
P
PrintablesThe Next Layer

Gridfinity 22mm Deburring Tool 1x1

A remix of atucom's deburring tool to fit the cheap AliExpress deburring tool, which is 22mm. I had to sacrifice 2 blades to make it fit. Also, I made the holes bigger, because they didn't work properly when printing with a 0.8mm nozzle…

Pobrania
389
Polubienia
66
Ocena
4,89
P
Printablesbenrr101

Ikea Galant Drawer Organizer 1x1

This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x1 organizer that is 1/4th the width of the drawer. Print 4 of these to fill one row across the drawer - or mix and match with the 1x2…

Pobrania
380
Polubienia
49
Ocena
0
P
PrintablesDaniel Vitanza

1x1 Gridfinity Dremel Accesories Holder

1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…

Pobrania
372
Polubienia
63
Ocena
5
P
Printablesidenny1

Gridfinity Phone Charger holder 1x1x3 or 2x1x3 (added steps file)

This was inspired by Zack Freedman's Gridfinity project. My take on a phone chargers holder for Gridfinity. I created using Onshape. Added step files for easy changes.

Pobrania
356
Polubienia
57
Ocena
3,67
P
PrintablesDeepSeaLoon

Keyboard Fidget Switch Tester Keychain 1x1

Made a 1x1 variant instead of the 2x1

Pobrania
355
Polubienia
38
Ocena
4
P
Printablesodingalt

Desk Top Shelf Brackets for 1x10 or Larger Boards

Brackets for building a DIY shelf out of a 1x10 or similar shelf board. Designed for X1C print bed (256mm * 256mm). *please note the slicer modifiers to make the bracket/screw part much strong I wanted a shelf that could specifically hold…

Pobrania
354
Polubienia
101
Ocena
5
P
Printables3DSpenny

Gluestick Holder 30mm - Gridfinity 1x1x6

A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…

Pobrania
352
Polubienia
43
Ocena
4,71
P
PrintablesMrNerdHair

Parametric Gridfinity AirPods Pro 1x1 box

I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…

Pobrania
340
Polubienia
27
Ocena
4,78
P
PrintablesFlyBy Tom

Sortimo 1x1 bins - Accurate to original

Need some extra 1x1 bins for the Sortimo system but the models I found online were not exactly the same as the originals and most importantly did not have the registration "feet" that keep the bins from moving on the box's internal grid.…

Pobrania
340
Polubienia
36
Ocena
4,75
P
PrintablesVLAD MARIUS

LEGO Flat Tile 1X1

This is a LEGO Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 307001, but it does not need to be white.

Pobrania
340
Polubienia
8
Ocena
5
P
PrintablesMadeByAdam

SD / MicroSD Card holder Gridfinity tray (1x1x3)

SD / MicroSD Card holder Gridfinity tray This holds 10 SD and 10 MicroSD cards in a 1x1x3 Gridfinity tray.

Pobrania
334
Polubienia
41
Ocena
5
P
Printablesfreylint

Gridfinity File / Paintbrush Holder 1x1x1

Print in place 1x1x1 gridfinity module designed to hold the rubber handles of the Army Painter miniature files neatly. Should work for most needle style files. To test before printing, make sure your objects fit snugly in a 6x33mm hole.…

Pobrania
328
Polubienia
43
Ocena
5
P
Printablesidenny1

Gridfinity Needle File holder 1x1x6 (added step files)

I adjusted the size of the holes to 4.7 mm to fit my handles. Added step files for easy changes.

Pobrania
325
Polubienia
49
Ocena
4,56
P
PrintablesLiam

1x1 Lego plate

this is a Lego 1x1 flat that I designed in onshape

Pobrania
322
Polubienia
9
Ocena
4,33
P
Printablesi8anov
Pobrania
312
Polubienia
12
Ocena
5
P
Printablesnickd

Gridfinity Funnel 1x1x6

Remixed to sit upside-down in a single gridfinity 1x1 square.

Pobrania
311
Polubienia
53
Ocena
4,94
P
PrintablesDavid McIntosh

Gridfinity 1x1 Qtip holder Fancy Bin

Simple 1x1 Gridfinity Bin you could use for Q-tips or anything else….

Pobrania
310
Polubienia
28
Ocena
5
P
PrintablesZemistr

IQOS TEREA/HEETS 1x10 clip case 2019

Keeps your IQOS TEREA/HEETS bullets covered and safe. Perimeters: 5

Pobrania
300
Polubienia
23
Ocena
4,5
P
PrintablesShellgame

Lid for 1x1 Gridfinity bin with label

Tight fitting click-in lid for 1x1 Gridfinity bin with label tab* and stacking lip. It keeps you screws or glitter in the bins and random garbage out of them even during moderate accidents. * Designed specifically for the default label…

Pobrania
298
Polubienia
48
Ocena
4
P
PrintablesDJ

Festool MFT DIY Corner Stops (20mm) 121x121mm, 217x121mm und 130x130mm (einstellbar)

Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm

Pobrania
291
Polubienia
79
Ocena
5
P
Printablestom davey

Gridfinity 1x1 bin

42mm Grid Base

Pobrania
291
Polubienia
20
Ocena
4,67
P
Printablesonerian

Lego 25269 ( tile 1X1 Quarter Circle)

Lego 25269 ( tile 1X1 Quarter Circle)

Pobrania
284
Polubienia
5
Ocena
5
P
PrintablesArthur Felk

1x1 Schrauben Boxen für Werkbank Küpper Werkbank Schrauben Ordnungssystem Aufbewahrung Sortierung

Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…

Pobrania
276
Polubienia
38
Ocena
0
P
PrintablesExpance

Gridfinity Screw Measure Tool, 1x1 Stackable

I wanted to put this handy little tool anywhere in my storage case so I added the upper edge to make it stackable.

Pobrania
276
Polubienia
56
Ocena
5
P
Printablesw3r

Gridfinity 1x1 Allen Key Holder

Gridfinity 1x2 Allen Key Holder I quickly modelled up to hold the allen keys that came with my Sovol SV06 Holds: 1.5mm, 2mm, 2.5mm, 3mm, 4mm I printed this in PLA with 0.2mm layer height, 3 walls, 10% infill and 4 top and bottom layers.…

Pobrania
275
Polubienia
26
Ocena
4,6
P
Printablesraw n

STACKABLE Gridfinity LR44 Battery Holder, 10 pc. 1x1x3

I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.) So I enlarged its height to 3U and it's stacking nice. Also added a label area because I like the label.

Pobrania
274
Polubienia
34
Ocena
5
P
PrintablesChris Trotman

Gridfinity 1x1 Desiccant Bin and Lid

I store my Camera Lenses in Gridfinity bins, and wanted to store some reusable desiccant alongside them in order to keep the humidity down, and reduce any chance of mould growing on my expensive lenses. The holes in the bin and lid are…

Pobrania
267
Polubienia
62
Ocena
5
P
PrintablesDusBus

Gridfinity - A23S battery holder - 1x1 - 9x

This Gridfinity container holds 9x A23S batteries. It does not have screw holes but I kept the regular magnet holes.

Pobrania
267
Polubienia
20
Ocena
4,8
P
PrintablesB0rax

Lego Light Saber clip - or Tile 1x1 with clip

I really liked the lego inspired light saber from cmdesign, he displayed this C-Clamp tile in one of his pictures but has not shared the model. I wanted to change that and made this model available. I added wall mounts in case it needs to…

Pobrania
262
Polubienia
40
Ocena
4,75
P
Printableshenpenben

1x1 Divided Gridfinity Bin with Detachable Label

I added a divider to the 1x1 bin size, and modified Lidfinity to fit with the divider.

Pobrania
247
Polubienia
36
Ocena
4
P
PrintablesFlyBy Tom

Sortimo 1x1 Bin Dividers and Label

I need a divider for the Sortimo 1x1 bins as I had a lot of small items that needed less space then the orginal bins provided. Turns out that a vertical divider wouldn't work due to the design of the lid so I came up with these removable…

Pobrania
247
Polubienia
55
Ocena
5
P
Printabless2sP

1x1x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Pobrania
246
Polubienia
16
Ocena
4,5
P
PrintablesDaGeek247

11x14 Picture Frame

11" x 14" x ¼" picture frame. Comes in parts which are designed to be super glued together. Does not require supports. Supports landscape and portrait without adjustment. If it scales wrong in your slicer, change the scale to 2540%.…

Pobrania
246
Polubienia
42
Ocena
0
P
Printablesfranmundo sg

Lego compatible plate 1x1 (3024)

This piece is compatible with Lego.

Pobrania
241
Polubienia
4
Ocena
0
P
Printableskristoff

Gridfinity 1x1 CR2025 Battery Holder

This is for Zach Freedman's Gridfinity System. It's a 1x1 CR2025 Battery Holder. Holds 9 batteries. With magnet holes. This is a remix of the Gridfinity battery holders by HusHageHobby.no who has holders for CR2032, C, D and other types…

Pobrania
238
Polubienia
18
Ocena
5
P
PrintablesNicholas Cooper

1x1x1x1 (Forsaken)

1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1 (cool I guess)

Pobrania
237
Polubienia
6
Ocena
0
P
PrintablesJD

IKEA furniture MOPPE 21x17x12 cm

I would appreciate a lot if you could support me giving a like and downloading, thank you guys.

Pobrania
234
Polubienia
48
Ocena
0
P
PrintablesJim

Gridfinity 1x1x16U Tall Open Bin

1x1x16U Open Bin, works great as a Pencil Cup, or for longer tools/probes.

Pobrania
227
Polubienia
23
Ocena
5
P
PrintablesJakob

Gridfinity Mitutoyo caliper holder 2x2 + 1x1

Can be printed on smaller printers. Step file included. V2: Added different heights.

Pobrania
224
Polubienia
35
Ocena
5
P
Printablessmoura

LEGO - Compatible Plate 1x10

Plate 1 x 10 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…

Pobrania
224
Polubienia
11
Ocena
0
P
Printablesdrgius

gridfinity 1x1 hex bit organizer

hello everyone, I am new to 3d printing when I was browsing through the files I discovered gridfinity organizing system and decided to organize my toolbox. I have looked at models uploaded here for inspiration but decided to make my own…

Pobrania
218
Polubienia
28
Ocena
5
P
Printablesidenny1

Gridfinity AA Battery 1x1x3 or 2x1x3

Gridfinity AA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter.

Pobrania
218
Polubienia
20
Ocena
5
P
PrintablesFlyBy Tom

Sortimo 1x1 Bin - Label Collar

A quick and easy way to add a label to Sortimo 1x1 bins. Just pressure fits into the bin and is easily removed if you want to change it around. Made this to compliment the 1x1 Insert Dividers I also made for the 1x1 bins. 1x1 Label Collar…

Pobrania
213
Polubienia
58
Ocena
4,5
P
Printables_KaszpiR_

Gridfinity 1x1 Lego 4x4

Notes: Two sets one next to another can not be bridged with single LEGO brick. This is because LEGO is 8mm between centers of the connectors, while Gridfinity is in general multiples of 7mm. So I guess 4x1 gridfinity could work (not…

Pobrania
213
Polubienia
45
Ocena
4,75
P
PrintablesDarkBrave

Better 9V Battery Gridfinity Holder (1x1x3)

Small Gridfinity 1x1x3 module that holds 2 9V batteries. Based off Jerr_074's design, but I modified it to have the lip at the top and to be a 1x1x3, rather than whatever weird size their's was. They can stack while empty, but not when…

Pobrania
212
Polubienia
19
Ocena
4,86
P
Printablessmoura

LEGO - Compatible Plate 1x12

Plate 1 x 12 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…

Pobrania
212
Polubienia
12
Ocena
1
P
PrintablesMei

Blokus 1x1 replacement piece

Simple thing, replacement for the 1x1 tiles in the game Blokus. I'll make more as i'll loose them. ;) Category: Toy & Game Accessories

Pobrania
201
Polubienia
1
Ocena
5
P
PrintablesOachkatzl

1x1 Gridfinity Epoxy Tray

1x1 Gridfinity bin that holds 10 epoxy trays with a break-away stirrer

Pobrania
201
Polubienia
38
Ocena
4,83