Wyniki wyszukiwania: 30m

Sortowanie

1733 modeli

P
PrintablesmoWerk

Radius Gauge 1-30mm | -52,8% Minimal Remix

Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…

Pobrania
719
Polubienia
329
Ocena
4,94
P
PrintablesAlvomane

Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix | Dreibackenfutter für Revopoint Zwei-Achsen Drehteller

This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…

Pobrania
655
Polubienia
126
Ocena
4,25
P
Printablesb-lud

Wall Anchor #7 x ~30mm Screw

Wall Anchor #7 x ~30mm Screw The shaft of the anchor is designed for a ¼" drill bit.

Pobrania
414
Polubienia
53
Ocena
5
P
PrintablesThunderbird332

30ml Detergentscoop // 30ml Waschmittel dosier Löffel

I designed this spoon, since the detergent I bought did not come with a scoop. It is pretty accurate to have a volume of 30ml when filled to the brim. The design is stable and strong and can be printed lying on the top side without…

Pobrania
383
Polubienia
15
Ocena
5
P
PrintablesMeister Joda

Prusa MINI Rail Spoolholder 130mm

Here is an rail spoolholder for larger rolls! Hier ein angepasster Spulenhalter für größere Rollen! Print instructions 3-4 perimeters + 20% infill for strength.

Pobrania
357
Polubienia
68
Ocena
5
P
PrintablesBruce

Dosen Deckel für 330ml

Filament: - JAYO - weiß - PLA+ - eSUN – hellbraun – PLA+ Objektgröße: ca. L:B:H in cm Drucker: Prusa MK3S, Bambu Carbon X1 Düse: 0,4 Schichthöhe: 0,2 Infill: 15% Stützen: keine Druckzeit: siehe 3mf/gcode Ziemlich passgenauer Deckel. Zum…

Pobrania
288
Polubienia
9
Ocena
0
P
PrintablesRadim

330ml can bike holder

A remix of a can clip for EU 330ml narrow cans.

Pobrania
194
Polubienia
24
Ocena
0
P
PrintablesSpotmatic

30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount

If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…

Pobrania
192
Polubienia
38
Ocena
0

Ring Box 30x30mm

Das ist eine kleine wunderschöne Ring Box für Verliebte, Valentinstag, Verlobung oder für Hochzeit mit Herzlogo und verdeckter Innenscharnier. Sehr praktisch auch für Hosentasche oder kleine Handtasche zum mitnehmen. Für Lovers ein…

Pobrania
169
Polubienia
20
Ocena
0
P
Printablescryptomilk

iFilter - Core One Filter Holder for 130mm Active Carbon Pads

I already used 130mm active carbon pads for my soldering fume extractor (iSuck), so this is just another usage for those filters. The model is made that if you print PLA, you can simply remove the filter without the needs to unscrew…

Pobrania
140
Polubienia
45
Ocena
5

6Pack-330ml Cans Dispenser

This is one more the next new Mini dispenser for 6 cans 330ml or other brands with the same diameter. (See the other Bigger Model 12 Pieces 250ml: https://www.printables.com/de/model/511721-redbull-dispenser or other Small Model Version…

Pobrania
128
Polubienia
24
Ocena
5
P
PrintablesIkarusIBK

SodaStream Air Gun for 30mm neck

I took the brilliant design from PALM and fitted the ring to my 30mm bottle neck. The grip is more stable with it, but you can't screw it on the bottle as one piece. You need to mount the ring first, then screw the valve on the bottle and…

Pobrania
114
Polubienia
24
Ocena
0
P
PrintablesRicardomo

Argolla cortina de 30mm de diametro

Agarre para cortina de salón con un riel máximo de 30 mm de diámetro

Pobrania
105
Polubienia
12
Ocena
0
P
PrintablesStevenTh

Hamster wheel 130mm diameter with spindle without bearings

The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…

Pobrania
102
Polubienia
7
Ocena
5
P
Printablesgdownton

Polygons to Polyhedrons and More - 30mm Sides

Magnetic spheres are used to make 3D printed polygons that can be used as an educational math tool, a fidget device, or a unique set of magnetic building blocks. The polygons can be used to make polyhedrons and other fun shapes.…

Pobrania
69
Polubienia
33
Ocena
5
P
PrintablesKaliban

Containers 30mmx90mm

Zyliner modified in the dimensions 30x90.

Pobrania
47
Polubienia
2
Ocena
0

[OECC3] 50x30mm Cablechain System Print-in-Place with clips

Cable chain system with 50x30mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 80mm bend radius. Your printer should be able to print 0.2mm…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesBen

Trinkhalmflasche Ring 330ml (DM Babylove)

A colored ring to identify a bottle from several identical bottles (for example in kindergarten) DM Babylove Trinkhalmflasche 330ml Print settings: 0.2mm layer height 0.4-0.6mm nozzle diameter no supports 100% infill PETG is recommended…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesBooks

30mm Flat-face Button

A 30mm diameter button in metric units. Flat face with thin ridge and a filleted edge.

Pobrania
22
Polubienia
7
Ocena
0
P
PrintablesHolzerMax

Hook for a 30mm thick Windowsill

Printed from ABS. Optimized (wall thicknesses) for 0,25mm Draft preset in Prusa-Slicer, so just use that and it prints in just less than 30min.

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesjordy lavreys

30mm carrosserie ring

30mm carrosserie ring met een 5mm gat in het midden. ik heb dit gebruikt bij een zeil vast te maken op hout

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Pobrania
6928
Polubienia
1150
Ocena
4,79
P
Printablestakarocks

M6 1.0mm nut and bolt (15-30mm)

I really appreciate you if you can consider a coffee for me if you like the design! June 25, 2023 Update : Added regular tolerance and tight tolerance M6-1.0mm nut I do not have M6 bolts or nuts when needed, decided to create myself. I…

Pobrania
5362
Polubienia
248
Ocena
4,88
P
PrintablesCarl D

Radius Gauge R1-30mm - AMS Ready

Comes with two boxes and a set of convex and concave gauges, suitable for radiuses 1mm - 30mm inclusive. By default, the boxes and tiles are the same colour, with the tiles and boxes having different accent colours for concave and convex.…

Pobrania
5011
Polubienia
1337
Ocena
4,63
P
Printablesunit

Radius gauges 1-30mm

Little bit remixed model. See remix diferencies section. Thanks very much to Jaha for his great piece of design in original model and to kisscoool18 for his colored remix. Good job! These remixes can be now complemented by Radius Gauges…

Pobrania
3992
Polubienia
1592
Ocena
4,9
P
PrintablesTater Zoid

Rugged Container 30mm Edition - 6 Sizes

30mm Rugged Containers This set of Rugged Containers features a 30mm interior width with various internal heights. The heights range from 20 to 70mm. This allows a great size range for a variety of personal uses. These, along with my…

Pobrania
3337
Polubienia
1351
Ocena
5
P
PrintablesZelrick

30mm Test Cube

Another 30mm test cube, This one is designed to test how precise your printer is printing dimensionally, check for ghosting on X and Y, short bridging on Z and top layers on Z. It takes about an hour to print on the MK3 and the Mini,…

Pobrania
3050
Polubienia
111
Ocena
4,96
P
PrintablesCmdrSoyo

A-10CS | Fully 3D Printable Dual 30mm EDF RC Plane

!! At the time of upload i have not yet flown my first prototype, there may be design changes based on test flight results !! The current thrust line is identical to the real world A-10 and will result in a pitch down moment when power is…

Pobrania
2973
Polubienia
471
Ocena
4,67
P
PrintablesAdam

Marble run ball/sphere in two parts (24mm, 30mm, 40mm, and 50mm)

This is a sphere printed in two parts with a threaded connector to attach each piece. Its design allows printing without supports, which gives a nicer finished look to the part. You can also mix and match colours! Use a dab of super glue…

Pobrania
2610
Polubienia
168
Ocena
4,94
P
Printablesjogu44

Radius Gauge R1-30mm [Remix]

Do you have a good benchy bottom? Two generated print profiles, 3plates vs. 5plates, use 5 plates if you have quality issues with utilizing the entire print bed. I recommend having wall-infill to outer/inner for the gauges but inner/outer…

Pobrania
2203
Polubienia
523
Ocena
4,83
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink 2.3

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Pobrania
2098
Polubienia
488
Ocena
5
P
PrintablesMark_Alpha

M3 Standoff Spacer Female-Female Polygon 4-30mm

Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.9mm OD: 6.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the show us. :)

Pobrania
2031
Polubienia
153
Ocena
5
P
PrintablesBig Merona

Sand scoop 130mm( about 5.1 inches)

This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form. There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly…

Pobrania
1717
Polubienia
669
Ocena
5
P
Printablessantiniki

Solar module drain clip for 30mm panels

Solar module drain clip for 30mm panels. Wonderfull in flat roofs (<30º) It drains the panel completely avoiding accumulation of dust. Insert it in the lowest panel side. Solar module drain clip for 30mm panels Tested with AE Solar panels…

Pobrania
1318
Polubienia
82
Ocena
5
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink v2

ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…

Pobrania
1177
Polubienia
178
Ocena
4,5
P
Printablesyu-supersonic

Can dispenser (330ml tall)

Can dispenser designed for tall 330ml cans (diameter 58mm, length 146mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge).…

Pobrania
1064
Polubienia
589
Ocena
0
P
PrintablesMark_Alpha

M2.5 Standoff Spacer Female-Female Polygon 4-30mm

Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.48mm OD: 5.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)

Pobrania
1001
Polubienia
66
Ocena
4,67
P
Printablesmhparsons

Beverage Can Dispenser-330ml

Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…

Pobrania
956
Polubienia
395
Ocena
4,5
P
PrintablesNeoRame

Honeycomb Euro Can dispenser (330ml and 500ml)

The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…

Pobrania
943
Polubienia
142
Ocena
4,5
P
PrintablesKieran E

Bike Beer Clip for 12oz, 355ml, and 330ml Cans

Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…

Pobrania
919
Polubienia
106
Ocena
4,7
P
PrintablesEngeneerNick

Two-in-One Can Holder for 500ml and 330ml cans

Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…

Pobrania
918
Polubienia
227
Ocena
5
P
PrintablesCYNNIX Inc

30mm Curtain Rod Hook

Lost the hooks for our curtain rod. So designed a replacement. Fits a 30mm rod. Print as many as you need to support the length of your curtain rod. We only need two for an 8' span. Print instructions 3 perimeters with at least 15% infill

Pobrania
821
Polubienia
90
Ocena
5
P
PrintablesMark_Alpha

M3 Standoff Spacer Female-Female Round 4-30mm

Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.9mm OD: 6.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the show us. :)

Pobrania
814
Polubienia
61
Ocena
0
P
PrintablesSV06_Squad

A10 (A-10) Warthog Bullet 30mm

This model fits nicely into a spent A-10 30mm casing. A dab of glue keeps it in place. Print with 0.1 layer height and heavy infill for realistic (ish of course) weight.

Pobrania
812
Polubienia
56
Ocena
5
P
PrintablesMax

Gridfinity cups height 18 (130mm) collection

Collection of Gridfinity basic cups height 18(130mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…

Pobrania
809
Polubienia
112
Ocena
5
P
Printablesisycat

Sanwa Style Cherry MX Arcade Button 30mm

Tested in PLA @ 0.2mm layer height. No supports. Print upright as is. Works without any processing but processing is needed if good sound is desired.

Pobrania
782
Polubienia
84
Ocena
5
P
PrintablesZaxMan3D

Soda Can Dispenser Deluxe (EU 330ml 500ml)

🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…

Pobrania
775
Polubienia
307
Ocena
5
P
Printableskisscoool18

Radius gauges 1-10mm & 11-30mm

Radius gauge for measuring inner and outer fillets from different parts. One assembly for R 1-10mm, another for R11-30mm. Thanks Jaha for orginal model. STL & 3MF files available.

Pobrania
750
Polubienia
258
Ocena
5
P
PrintablesJaha

Radius gauge 11-30mm

Radius gauge for measuring inner and outer radius from objects. Other radius gauges: 1-10mm - https://www.printables.com/model/378121-radius-gauge-1-10mm 31-50mm - https://www.printables.com/model/394652-radius-gauge-31-50mm Assembly: For…

Pobrania
747
Polubienia
115
Ocena
4,93
P
PrintablesDockGuy

eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]

Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…

Pobrania
733
Polubienia
58
Ocena
5
P
Printableskenny93

Winkel 33x33x30mm

Gedruckt aus PLA. PETG, ASA und andere, nicht Flexible Materialien Funktionieren aber auch. Mit mindestens 3 Wandlinen Drucken! Stützen sind nicht nötig. Fusion360-Datei angehängt, somit habt ihr freien Spielraum bei der Anpassung der…

Pobrania
703
Polubienia
67
Ocena
5
P
Printablesshawly

Roomba ramp - Ramp for vacuum robots (30mm incl. Fusion360 file)

I converted the Roomba ramp from drdentz for Fusion360 and extended it by 10mm in height for my Bedroom. I also added the F360 file for anyone that wants to modify it. Notes: Printed in 2:33h with a 0.6mm nozzle and a layer height of…

Pobrania
672
Polubienia
24
Ocena
5
P
PrintablesTheRealJocki

Stringing Test Tower 30mm

Stringing Test Tower with notches every 5mm. Stringing Test Turm mit Kerben alle 5mm.

Pobrania
671
Polubienia
8
Ocena
5
P
PrintablesBadDIY

Super Stong Honey Comb Wall 30mm

Honey Comb Wall I wanted a super sturdy honey comb wall (HCW) with very secure mounts. This HCW can be screwed to a wall and panels can be epoxied together. Built on 30mm hexagons. Mods are screwed together and not press fit. They are…

Pobrania
660
Polubienia
111
Ocena
0
P
PrintablesSurfalex2000

Creality K1C Lid Riser 30mm (one Piece)

Creality K1C Lid Riser 30mm (one Piece) with pre made Support for PLA/PETG Support combination. No screws needed to hold the cover, this lid fits perfectly Now the Cable chain doesnt collide with the cover, and the ptfe just just fits…

Pobrania
659
Polubienia
40
Ocena
4,5
P
PrintablesRIP_Day

Rod / Pipe Holder 22mm /25mm /30mm

Simple screw mounted holders for pipes/rods. Can be used for filament storage or hanging clothes. The holders can be mounted with 4x 4mm(or 3mm) countersunk screws. They are available in three different sizes: 22mm, 25mm, and 30mm…

Pobrania
641
Polubienia
343
Ocena
5
P
PrintablesMaxstupo

Raspberry Pi 30mm Fan Mount

A 30mm fan mount for the Raspberry Pi. No spacers needed. Step file included.

Pobrania
640
Polubienia
57
Ocena
5
P
PrintablesPhill Bond

Yeti 330ml Can Spacer

If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…

Pobrania
628
Polubienia
21
Ocena
5
P
PrintablesJawaswag

330ml can dispenser

Print the dowels at 40% infill to give them some strength. I used expanding glue, e.g Gorilla Waterproof Glue, in the dowel holes so the assembly Is stiffer. Use cable ties or clamps to keep the parts in place while the glue expands and…

Pobrania
620
Polubienia
82
Ocena
5
P
PrintablesJacyk
Pobrania
603
Polubienia
76
Ocena
5
P
PrintablesManabun Lab

Raspberry Pi 4 case (40mm or 30mm fan)

I made a small case the same size as the circuit board of raspberry pi4. You can install a heat sink and a 40x40x10mm or 30x30x7mm fan. I am fixing the case with 2Mx8mm screws. Please enjoy! Print Settings Printer Brand: Creality Printer:…

Pobrania
581
Polubienia
41
Ocena
4,75
P
PrintablesApplefreak71

Gehrungslade 30mm

Gehrungslade : mit Schlitzen in verschiedenen Winkeln, durch die man das Sägeblatt führt und so beispielsweise Sockel- oder Deckenleisten auf Gehrung schneiden kann. Eine Gehrungslade ist vor allem bei Handsägen für den Gehrungsschnitt…

Pobrania
579
Polubienia
32
Ocena
4,8
P
PrintablesKaosuNeko

Cable Chain 15x30mm Flexible Drag

Flexible Drag Cable Chain 15x30mm Includes both end links, closed links and open link. No removable cover. Look forward to the near future. You should probably use supports. This thing repeats the design of the product that can be…

Pobrania
572
Polubienia
66
Ocena
4
P
PrintablesRUMcajz

Can Holder Riser + Inserts (12oz + slim 330ml - Scalable)

Can Holder Insert / Riser I decided to make these simple inserts that can make using my canholders more enjoyable. 41mm Insert for smaller cans in a larger holder (12oz can in a 0.5L holder) 330ml Insert for slim (coke) cans in a larger…

Pobrania
570
Polubienia
52
Ocena
4,75
P
Printableskiloalpha

Voron Stealthburner Cable Cover with 30mm Fan

This cable cover has the necessary clearance to provide room for connectors and cables without interfering with the fan. Installed on a Stealthburner toolhead with the BTT SB2240 CANBus PCB.

Pobrania
568
Polubienia
92
Ocena
2,5
P
PrintablesAndreas Jäde

Fan Adapter from 30mm to 40mm

I'm using this adapter for adding a 40mm fan to the 30mm E3D fan holder. You'll need 4x M3x6 for the 30mm side and 4x M3x16 for the 40mm side (including the fan). Category: 3D Printer Accessories

Pobrania
559
Polubienia
34
Ocena
5
P
PrintablesscaryPug

Parametric Raspberry Pi 4B Case (30mm fan) with vertical stand

Based on John_Sinclair's design: https://www.thingiverse.com/thing:3723481 I completely re-made this in fusion360 (file included) using Red Logo's high precision raspberry pi 4b model dummy as template (…

Pobrania
557
Polubienia
60
Ocena
4,71
P
PrintablesJason D

Wheelchair 130mm

I designed this on the weekend for someone who has a disability centre. It turned out quite well so I am uploading it here. It is a bit hard to break out of the raft. You can't print it raftless. It can be printed in an Up Mini...just.…

Pobrania
547
Polubienia
49
Ocena
4,75
P
PrintablesJimmy21

Backpack Strap Repair Buckle (20mm / 25mm / 30mm)

Is your backpack buckle just one bad day away from total collapse? Don’t wait for disaster to strike mid-hike. Print this repair buckle now and stash it in your survivor kit! Because nothing says “prepared” like fixing your gear on the…

Pobrania
518
Polubienia
290
Ocena
5
P
PrintablesMark_Alpha

M4 Standoff Spacer Female-Female Polygon 4-30mm

Collection of M4 female-female self-taping spacers I use for my own projects. ID:3.96mm OD: 8.10mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)

Pobrania
500
Polubienia
55
Ocena
5
P
Printablessorrenaveria

30min Coaster

Fast Print Coaster Uses only 1.6m filament (4.3g) I am new to 3D Printing and 3D modeling and I find it hard to model patterns Also custom patterns print very slowww So after some time of thinking I came up with an idea on how to print…

Pobrania
465
Polubienia
81
Ocena
5
P
Printablesl1lc4rl0s

M3x30mm

A M3x30mm screw

Pobrania
464
Polubienia
13
Ocena
0
P
PrintablesCarl4D

Ender 3 V2 various Riser Feet 30mm

These are meant to put on the oem rubber feet. not to replace them. If u use the Ender 3 V2 Silent Pack then these (basic_Mobo_PSU_cover_30cm_V1.stl) feet, with this cut out at one of the edges, could be Helpful for you. update updated…

Pobrania
449
Polubienia
57
Ocena
5
P
PrintablesPrintStructor

Archetype Blackbird Toolhead (WIP) - bambulab hotend with 30mm fan, VZ-hextrudort, Fysetc CNC TAP, custom faceplate, EBB36

This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…

Pobrania
449
Polubienia
117
Ocena
0
P
PrintablesBeo666

Monster Energy Dosenverschluss 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Pobrania
447
Polubienia
57
Ocena
5
P
Printablesmetrodrone

Empire 30mm & 40mm Fan Guards Star Wars Pattern

Fan guard for 30mm & 40mm fans styled after the vent and panel patterns of the Empire in Star Wars.

Pobrania
442
Polubienia
91
Ocena
5
P
PrintablesFilarte3D

Raspberry Pi 3B Case for 30x30mm Fan

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case remix for a 30x30mm fan.

Pobrania
442
Polubienia
33
Ocena
5
P
PrintablesJerrod H

A-10 30mm GAU-8 Gatling Gun Rotating Desk Model / Pen Holder

BRRRRT !! A nearly-1:1 scale model of the A-10 Warthog's legendary 30mm GAU-8 Avenger anti-tank cannon with accurate barrel rifling that freely spins using bearings for rotation. As a bonus, a cam in the base causes pistons to ride up and…

Pobrania
442
Polubienia
84
Ocena
4
P
Printablesnickstuffinc

Vase Mode Gift Card Holder 30min last minute print

Here is a Quick last minute gift card holder that is sure to please. I'm calling this an intermediate print as you need to adjust the scale of parts for fitment. My print setting are below. This print is very quick. Print Settings Printed…

Pobrania
430
Polubienia
75
Ocena
4,67
P
Printablesyukosteel

ELEGOO Neptune 3 Pro / 4 Pro feet riser - plus 30mm / 40mm / 50mm

ELEGOO Neptune 3 Pro / 4 Pro feet riser - plus 30mm / 40mm / 50mm Easy print, No support, No extra bolts needed. Simply print four risers of desired length - included models are +30mm, +40mm, +50mm (resize by Z in slicer if another custom…

Pobrania
428
Polubienia
82
Ocena
5
P
PrintablesOld Curmudgeon

Nespresso Vertuo 230mL Dispenser

This is a remix, but it's been 2 months and I'm now unable to locate the source of the file I downloaded. Apologies to the OC. I'll update the post if I track it down. These holders are big. I can't print larger than the Triple on my…

Pobrania
422
Polubienia
59
Ocena
5
P
PrintablesDiego Fernandez

Killflash / Scope Protector 30mm

This is not a fucntional flashkill, it's mean for use in airsoft to protect scopes with an outer diameter of 30mm.

Pobrania
418
Polubienia
25
Ocena
5
P
PrintablesSerinFel

Honeycomb Shelf Bracket remix 185 x 130mm

This is a re-scale of Jonathan Levi's remix of the Honeycomb Shelf Brackets to 185 mm x 130mm. I liked the idea of being able to hook something into the honeycomb section of the bracket, or just leave it open. The option is there for…

Pobrania
411
Polubienia
64
Ocena
5
P
PrintablesPLAUK

Radius Gauges Inner/Outer 1mm to 30mm

Radius Gauges Inner/Outer 1mm to 30mm Inner and outer radius gauges covering measurements from 1mm to 30mm in 1mm increments. There are a few of these models around, but I wanted something with large text that I could put on a wire loop…

Pobrania
407
Polubienia
203
Ocena
5
P
PrintablesCamPrints

60 30ml airbrush paint holder

I was tiered of not being able to see my paints without taking them out of the box. Sure the box keeps them tidy but man o man! So I designed this to to print on my Ender 5 Plus. it fits a 350mm bed. I haven't had a chance to print it yet…

Pobrania
405
Polubienia
46
Ocena
0
P
PrintablesDuane

Crochet Hook 30mm

Use 7 pieces of filament about 6-8mm long to make location pins for gluing. Make sure the faces mate flush before gluing with CA. Sides need a bit of smoothing with sand wet sandpaper.

Pobrania
399
Polubienia
79
Ocena
4,5
P
PrintablesH3mpp4

30mm caliber ammo

I designed this 30mm autocannon ammunition for props usage to airsoft games. Tip and shell are printed separate of each other so you can add somethign like sand for weight. Fitting of two pieces is really snug. There was a small mistake…

Pobrania
390
Polubienia
61
Ocena
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover

Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.

Pobrania
375
Polubienia
45
Ocena
5
P
PrintablesMr.melted

tiny whoop 30mm toroidal props 2-6

this is a toroidal prop for tiny whoops like the eachine e010 that use a 30mm prop and 0.5mm motor shaft after testing the hole is to small to be properly printed will update the size soon

Pobrania
374
Polubienia
40
Ocena
5
P
Printablesfindtherror

30mm top riser for Kingroon KLP1

30mm riser for the top plate of the Kingroon KLP1. The screws to mount the riser to the frame are hidden inside, a ball head hex driver is needed. STEP files included, feel free to remix edit: added FreeCAD file edit: added 230 version…

Pobrania
374
Polubienia
36
Ocena
4,25
P
PrintablesLordDeno

HSW Holder 50x30mm

Honeycomb storage wall holder 50x30mm, to be used with a hallow insert for the honeycomb wall.

Pobrania
374
Polubienia
64
Ocena
4,67
P
PrintablesZapador

Tikka T3x CTR Stock Extension (10, 20 & 30mm)

Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad. Print settings I used a 0.60mm nozzle, 5% infill and 7 walls to make…

Pobrania
370
Polubienia
26
Ocena
5
P
PrintablesSamhec

30mm M6 bolt and nut for 120mm Desk Fan

Please print the bolt flat side down. It is normal to hear squeaking sound when tightening the nut and bolt. You may need two plier to install it. Layer: 0.10 mm Material: PETG recommended Infill: 100% Perimeters: 4

Pobrania
368
Polubienia
31
Ocena
5
P
PrintablesAverageSauce

Clamp for 30mm tubes

This is a simple clamp for a 30mm tube, common measurement in fishing gear. I'ts designed to fit a square tube in the front but it could easily be modified to fit any kind of accessory. Uses an M5 bolt and nut for the fastening mechanism,…

Pobrania
368
Polubienia
74
Ocena
5
P
PrintablesAJAJ1992
Pobrania
364
Polubienia
15
Ocena
0
P
Printablesn.leinad

Foldable 20,25,30mm Aluminum Profile Connectors

This simple connector can join two 20x20, 25x25, 30x30 mm aluminum (or other) pipe ends together, either simple square pipes or I-type extrusions. It allows for 180° rotation and has a spring tensioned button for locking them in the…

Pobrania
363
Polubienia
144
Ocena
0
P
PrintablesKevin

1in/30mm/34mm Scope Rings

Basic picatinny/weaver one piece scope rings for 1in, 30mm, and 34mm tubes. Height options range from 16mm to 38mm as measured from top of rail to center of ring in 1mm increments. Available in text and no-text versions. One 25mm M3 bolt…

Pobrania
362
Polubienia
27
Ocena
5
P
PrintablesVoltex

Rush Tank Solo Mount / FPV 20mm to 30mm Raiser

I wanted to install a Rush Tank Solo on my Quad, but I noticed that the only mounting options it offers are 20x20 on the top side of it. Since I have my TBS Tracer right where my 20x20 Mounting Holes are on my Frame and I didnt want to…

Pobrania
360
Polubienia
23
Ocena
0
P
PrintablesHerrFrodo

30mm Scope Picatinny Adapter

I've created this to mount both my lpvo scope and my reddot to my airsoft. It should work with scopes that have a 30mm tube. M5 Screws are used to screw both halves together.

Pobrania
358
Polubienia
77
Ocena
5
P
PrintablesROLS733

30mm Spacer for Pastamatic Filament Spool Winder Spindle

for slim spools like the old Makerbot spools.

Pobrania
357
Polubienia
39
Ocena
5