351 modeli
This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
Version 2.2 now available Minor errors fixed (see version release notes below). Assembly Guide finished! The assembly guide has now been been completed, containing 38 pages with over 60 diagrams to assist in creating the banjo from start…
This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…
This heat-set insert press is designed to be budget-friendly while still providing a functional tool. Most of the necessary components can be printed, and the 6mm rods can be sourced from old laser toner cartridges. Depending on the…
This is a model and gcode for a ridiculously simple vibration-isolating foot pad for Creality (and likely other) 3D printers. Features: Non-printed parts (two pads per) available most anywhere 1.5" anti-slip pad for the bottom 3M's…
This is one of three winning designs in Joel Telling's filament shelving system spool holder contest . A filament holder that just hangs from the front 1x2 will cause it to twist and warp over time and will not be very sturdy. My intent…
Oni Cyber Punk Mask by SeanAranda From Thingiverse. Posted here due to Thingiverse losing popularity and Creator being MIA for over a year. I have also added the remixed version that is preassembled. A brilliant design i wanted to share…
Assembly Video: https://youtu.be/swuw8Jnv1ro *if you have trouble downloading the file, please check another download link I provided in the YouTube video description note : 11.10.24 update headballslotv2.stl - deeper ball socket STL and…
This is not my model but a repost off of the amazing creator from Makerworld. BRIM IS RECOMMENDED Also subscribe to this makers channel 3DP-RNS If you guys have any suggestions for accessories, please comment or message me!
Źródło oznaczyło ten model jako treść 18+.
See the following link for video demo. See assembly instructions in photos. Adjust the offset angle between the cams to change the configuration in which the wings flap. Design intended for .4mm nozzle and <.3mm layer height. Use organic…
A Compact, 3D-Printed mATX Open Air case for Builders & Tinkerers This open-air test bench case is designed for builders who need easy access to their components while keeping a compact yet functional layout. Whether you're testing…
Revision History: Rev 1.1 (3/30/2024) Rev 1.1 update: (1) Re-upload "jig_*.3mf" with the right version. (2) Manual updated with illustration on "how to put together the jig". (3) Updated link to Lightnin’ Bug plan for details on tail…
I hope you enjoy my latest entry in the 3D Printing Industry Awards 2024 trophy design contest! I created the idea for this project thinking about a combination of abstract concepts together with harmonious geometric shapes. The result of…
This design is made to cut PET bottle to recycle them into 3Dprinter filament. created for the recreator from Josh ( https://www.facebook.com/groups/recreator3d/ ) The cartridge is made to easily change the strip height (from 1 mm to…
This printer profile is perfect for LW PLA and the planes from 3DLabprint, Planeprint, ... This is a PrusaSlicer profile, which can be used with the BambuLab X1C, because the BambuLab slicer partly does not recognize internal structures…
MLP Based Unicorn (Easy Print No Supports ) by 3DPrintedAspie Print Settings Printer brand : Creality Printer : CR-10 Mini Rafts : No Support: No Resolution : 0.1 Infill : 15-25 Software: Cura 5.2.1 Nozzle: 0.6 Filament brand :…
Having fun, this is the second CoreXY version for me. Works fantastic, can be scaled on all axis. Physical and mesh bed leveling. You will need a 6 driver board for this one. Physical and mesh bed leveling.…
This is my version for a splittet Plateau Fountain with 2 or 3 outlets for the great 3dprinty Fountain. added a little extra fancy top and reduced the outlets a bit, so there should be enough water to make a nice fall. UPDATE: the outlets…
Introducing Refill Masterspools, the ultimate solution for 3D printing filament. With over 16 years of experience in 3D printing and product development, we at 3DP have created what we belive is the best refill masterspool. Our focus on…
THIS MODEL IS INFERIOR TO THE REMIXES. Please Use the remixed boxes instead for a better user experience! 3DP PubBox is what I think is a fantastic blend of cooling, functionality, and compatibility. It is meant to be a middle ground…
This is 3Dprint1UPu's model that has been painted for MMU printing. You should just be able to slice and print. Everything has been taken care of.
Revision History (11/26/2024) Rev 0.0 - Print & Assembly verified. Pre-maiden release. Use with caution. This release is intended for experienced builders/pilots with extensive knowledge in building 3d printed rc gliders. Although not…
See the following link for video demo. Assembly instruction in photos! Design intended for .4mm nozzle and <.3mm layer height. Organic support material where necessary.
This is one of my takes on what the award might look like for the 2024 3D Printing Industry Awards Update November 2, 2024: Adjusted plaque to be more visually appealing. Update November 3, 2024: Updated files so adornment fastens to the…
I wanted a holder for my nozzle set that I could connect to my printer so that I would stop misplacing them. Fits snugly on the horizontal bar of your Z axis. Has space for 8 nozzles Print instructions Print Settings: Layer- 0.2mm infill-…
Freestanding, heart desk ornament that when viewed from above spells "MOM" Added a stand to rm3dprintdesigns design
More info to come… This is the 5th version of the V1 Engineering 3D printer. Currently, the most details are here, https://forum.v1e.com/t/v5-1-the-plated-printer/42809 **MP3DP -V5** This printer was a group effort and a direct result of…
Introduction: This is the complete Rolling Stock that was designed for my young grandson. When he came for a visit after about age three, his first question was if we could print another rail-car. The answer was “Of course, What kind of…
not my model, reuploading here because it is the inspiration for the PIP-300BLK i made. DO NOT ADD POWDER TO THESE AT ALL! PLEASE DOWNLOAD THE README - IMPORTANT INFO these are non-lethal, print in place ammo inspired by the PIP-9mm…
Yet- Another one USB cables wall hanger. I think the way I hook the cables is quite unique. But the most interesting thing is that the number of USB slots is a parameter of the fusion360 project. So if you are Fusion360 user, you can…
Four different trophy bases included. print with back lying down on bed, no supports needed. Do a filament change at layer 30.20. Funniest Costume Scariest Costume Best Costume Best Couple Costume Printed at 2mm layer height Use with…
This is my modified version of the pump action shotgun for Prop3DPros BEAUTIFUL M41A Pulse Rifle. I wanted a bolt action when you use the pump. YOu will find full instructions on how to build this at the following link. Let me know if…
Turn-Table Any self-respecting railroad needs a turntable for obvious reasons. This turntable can be used as a center of a roundhouse (more about this later) or as a center switch for multiple track paths. The basement layout used the…
A drop in replacement for the PintX box or Pint. Compatible with stock PintX bumpers. Max battery fitment ranges from stock PintX battery to 17s2p 18650. Parts used for complete assembly: Stock Pint or PintX battery box lid screws or…
This is a hand wired keyboard. Please be familiar with the process of hand wiring before undertaking this project. Inspiration for this project comes from this hero . Features 5° typing angle Low profile front height Supported layouts:…
My buddy @JS-Studio made me this awesome model for my birthday! SuperBart or Super3DPrintman is now available for you to print and I can't thank Jan enough for this one. The face looks incredibly lifelike and that body also looks.... LOL.…
If you've picked up an Elegoo Centauri Carbon, you should also take a look at CC3DProject's line of mods for it. Not only are they incredibly sleek, they're also remarkably strong and, in my experience, even help dampen the vibrations…
The super cute labubu toy with a heart and a text that says "I love you" . Super cute:) To 3d print. It looks cool and cute. For friends, desk, loved ones, …
The internal camera of the XPLUS3 is affected by the internal LED lights, causing severe flare. If a self-made lens hood is attached here, it will hit the print head at maximum approach and cause damage accidents (This actually happened…
It's a fully working 3d printed finger board Category: Toys & Games
Fits bigger dice (up to 28mm) and keeps the screw cap design from the standard rollup dice box.
These are backdrops to compliment the Minis created by Wekster and they plug right into the Wexagon - Hexagon Shelfs he has made. This is the first batch of 4, I plan to make a backdrop for each mini that he has made.…
Simple Eat Sleep 3D Print Logo created for color printing Print instructions Print with 0.25mm layer hight. No supports needed.
soooooo this is a Modular Holster I designed. I took big inspiration from the OpenSource files of T-Rex Arms SideCar. Should work with many Pistõlas, as long as you have a TLR-1HL light, maybe even O-Light PL2 The “Friction Washer” is not…
I find that the regular Creality Splice Kit for the CR-30 3DPrintMill a bit long for everyday use in my space limited apartment. This 3D printed version gives you an extra 180 mm for parts to roll out. The vertical height of the roller…
"Paw shape" organizer created to accommodate in a compact way some basic 3D printing tools: 2 small pliers, superglue, glue stick, small flashlight and cutter. Print instructions I did my model in PLA. Layer height: .3mm (Draft) and…
EDIT: After making new pictures I have realized, that this gable is in two parts, so I guess you have two split my model. I'm sorry I have no clue. Maybe I will look into it at a later time I printed everything in PLA and with a scale of…
This 3D-printed Mini ITX case is designed with budget hardware in mind , allowing you to build a compact PC without the high cost associated with smaller components. The mainframe prints as a single plate , simplifying the assembly…
This is my take on a Prusa I3, with a CNC mill, laser cutter friendly frame. MP3DP -V2- Milled / Printed 3D Printer -V2-. This uses common 3D printer parts, hardware, milled parts, and printed pieces. All the info is here,…
El cubo de calibración pertenece al reto de la 3DPrinterParty 2023 planteado por PrintaLot. Las condiciones para participar son imprimirlo en el tamaño que se ha diseñado de 40x40x40 sin modificar sus dimensiones, y haberse inscrito en la…
prints super nice in i would say all materials :)
A part of RMIT Major Project. Hi everyone! this device is intended to be the first of a family of product developed for the purpose of aiding daily lives of people with mobility impairments, specifically arthritis. This project especially…
Aquí os dejo los modelos 3D de las modificaciones que le he hecho a mi Cr30 (3D PrintMill) Las mejoras son: -Rejilla de la electrónica con doble ventilación 60mm -Soporte para bondtech BMG (mejor el de izquierdas) -Patas elevadoras para…
When building a small house for my cat I looked for the design to quickly align and join sticks into a simple structure. I stumbled on woodworking crafts and found heaps of interesting joints. As woodworking is a subtractive…
If you like this design please give my post it a like on the below link. :-) This is my entry to the ERRF 2021 Prusa Maker Coin Challenge, so all likes are welcome.…
57.15mm x 101.6 mm x 47.63 mm (feel free to scale) about 2 hr & 45 minutes of 3dprinting, infill is not as important
为3DPrintMill原厂挤出机定制，可以让你的挤出更顺畅，同时使用TPU成功率提高。 Customized for the original 3DPrintMill extruder, it allows you to have a smoother extrusion while using TPU with an increased success rate.…
Description This is a 3D printable model based on HOLOLIVE talent GAWR GURA. There are other models available on OPENSEA and PATREON. You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl…
I want a funny sign so i made one with Walter and Achmet this one i post later printed in PLA please post a comment if you make one
OLD Version - new one is here , https://www.printables.com/model/282346-mp3dp-v41 MP3DP -Repeat- Milled/Printed 3D Printer "Repeat". This can be a fun project to use your new CNC mill for. This is my take on a CoreXY 3D printer, with a…
Heya! PrintedScript here! I'm happy to share my first model! This is a model that was a long time in the works, though I think I could whip up another one pretty quick and easily now that I've learned from it! This model was made for…
Why do you need to buy a plectrum or guitar pick if you can print them? Even better, why not get yourself a Z3DP Plectrum? They are 2 mm thick and you can print them in PLA or PETG. I would recommend using PEGT as I did. Making this 3D…
The “proper” 3dp Pubbox. This is for all intents and purposes the OG 3dp Pubbox, i just added some holes and slots to the bottom for 2 m3 inserts to properly attach the connector covers and made my own version of those. Also added some…
Yet another easy printable and usable Goggles. [Optimised for 3D Print on Transparent Film]. Goggles weight 29gram (Stripe inclusive). Speed Build Video https://youtu.be/TRsTjk00IgQ Don't forget to subscribe my Channel.…
Oriface created this meme-worthy Gnome and I saw someone in a 3D Printing group print it with layer shifting, placing the head on the hand. That gave me idea, and Voila! Category: Art
DO NOT ADD POWDER TO THESE AT ALL! PLEASE DOWNLOAD THE README - IMPORTANT INFO these are non-lethal, print in place ammo inspired by the PIP-9mm project. insert a 209 primer and have some cheap fun plinking or function checks/tests. DO…
Imagine, you are sitting down, designing some dumb crap on CAD (like always) and you are eating a cookie. You pick up a part to measure and realize you don't have calipers. Solution: turn that cookie into a measuring tool. Take this bad…
Trophy for Boundless Creativity Enabled by 3D Printing This trophy symbolizes the freedom and possibilities that the 3D printing industry offers. It represents an Open Mind , the free spirit, and the courage to innovate embodied by 3D…
An open source and 3D printable bipedal robot that can walk, balance, and has the potential to navigate its surroundings. I'd recommend printing all parts at 20-35% infill, except for the lock and small reduction gear. Print those at…
3-Way Joint with dowel pins. No gule needed.
While designing parts for a “Thomas” size model railroad I found that “Matchbox Cars” had the wrong scale. A “Matchbox Car” was almost the size of a “Thomas” engine, so I needed cars built to a smaller scale. Also, they shouldn’t look…
Submission for the 2024 3DPI Award.
This is a 3D printable model based on HOLOLIVE talent MORI CALLIOPE. There are other models available on OPENSEA and PATREON. You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl files,…
Make sure you have good bridging settings, no support needed. This uses a 5015 fan and M3 hardware. Here are the Fusion360 CAD files, https://a360.co/3AAP0yA
Description: This is a 3D printable model based on HOLOLIVE talent USADA PEKORA. There are other models available on OPENSEA and PATREON. You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl…
This model is intended to be printed using sls.
This is a 3D printable model based on HOLOLIVE talent NINOMAE INA. There are other models available on OPENSEA and PATREON. You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl files, .blend…
a simple 1 piece buffer tube option that gives more comfort when aiming. but you do need a ar-15 spec butt-stock to complete this assembly
Dragon Slayer Sword for 3DP-RNS
I am working on an Alioth 3D printed IOM sailboat and have made a few customized parts. This is a custom mount for an SMG100 winch servo. It also has an offset rear eyebolt hole so there is clearance for it and the 2.5mm mounting screw…
This Phone stand is ideal for your desk, table, or even on the side table. You can use this stand to put your Phone, Smartphone, and table and look very fancy. With the holes, you can add your charging cable through so it can charge your…
Penny Gemstone, The 3DPrinted (FDM, SLA versions separate) Vacuum fill fountain pen :) Inkwell coming soon! This project is currently in Beta. SLA hasn't been finished yet due to lack of an SLA Printer. FDM works well outside of my iron…
Print instruktions: PETG or ASA Layer height 0,10 - 0,20 mm No supports needed Print on a textured plate
Description This is a 3D printable model based on HOLOLIVE talent MARINE SENCHOU. There are other models available on OPENSEA and PATREON. You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl…
Modification of the original engine mount of the 3DPrintLab free model of the Piper J3 CUB . Main problems solved are Motor with mounted connector can freely use this mount without destructive modification. Motor I use has short screws…
A remix of the wonderful design Christmas Ball Grinch Earrings by Luc3DPrint: Resized the Grinch's hand to 150%. Converted to single body, multiple layer height for pause for filament change prints. The screenshot serves as a guide for…
3DPN Challenge - Remix a Super Hero!
Blower on side plate rotated 180°.
In order to print properly, you must enable support all and I had to enable brim, you may have better luck than I did without. Depending on your printer you may have to ream out the holes, they are slightly larger than the bolt diameter.…
This model is intended to be printed using sls.
I wanted to model a molecule containing phosphorus which can make 5 covalent bonds. The original kit by @3DPrinty only included atoms with up to 4 bonds when I needed the 5 bond atom so here is my version of one.
Toolbox for being lasered OR 3dprinting it. All the dxf-files are for lasering it out of 3mm thick material. All the 3mf-files are for 3D-printing.
use supports print it with the wings on the ground
Tiny Y-Splitter for PTFE tubes that you can use on any 3D printer, and it is fully 3D printed. It is compact and light enough (less than 3 cm in height and weighing only 1.5 g) to be used anywhere on a printer, and it won’t bother your…
Reuploaded from: https://www.thingiverse.com/thing:3703468 (second version) Original creator suggest 100% infill, but printed fine with 15%. Also 0.2 mm layer height gives a great result. Some areas are very small on the first layer. I…
![Flexible Goggles Optimised for 3DP [Print on Transparent Film Challenge] 7-size Covid-19](https://media.printables.com/media/prints/59044/images/618162_43d53e5e-8773-42fa-9a4f-07a80dfc051c/large_display_img_5666_59044.jpg)
