Wyniki wyszukiwania: 40x20

Sortowanie

Liczymy pasujące modele…

Rectangular 140x200mm Stacking Baskets & Lid - Hexagon Pattern

This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!

Pobrania
16 869
Polubienia
4158
Ocena
4,95
P
PrintablesIvanov Kirill

Profile pipe plug cap 20x20 and 40x20

Profile pipe plug cap 20x20mm and 40x20mm Заглушка профильной квадратной трубы 20х20мм и 40х20мм

Pobrania
763
Polubienia
42
Ocena
5
P
PrintablesBlueFalcon1066

Ender 3 V2 40x20 Hot End Fan Shroud

I wanted to switch out the stock hot end fan with a noctua A4x20 but couldn't find a new shroud that I liked. I love the stock shroud, so I basically just redesigned it to fit the larger fan and removed the grills to help with noise. The…

Pobrania
647
Polubienia
76
Ocena
5
P
PrintablesDavid

FlashForge Adventurer 5M lower rear fan spacer- to fit a standard 40x20mm fan to non Pro model for filtering.

This spacer fits over the plastic stand-offs that prevent you retrofitting a stock 40x20mm fan on the AD5M lower HEPA filter housing outlet. Without the spacer there is an approximately 4mm air gap between the fan body and lower filter…

Pobrania
614
Polubienia
94
Ocena
5
P
PrintablesAndys1957

Open Cable Chain with Clip 30x40x20mm

Update 16.4.23: Step-Files uploaded Open Cable Chain with Clip 30x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories

Pobrania
613
Polubienia
31
Ocena
5
P
PrintablesEldarHan

Creality Ender 3 V2 - Clean Shroud 2.0 (40x20mm Hot-End Fan, 4010 Blower Fan)

This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…

Pobrania
506
Polubienia
66
Ocena
5
P
PrintablesPolyGone

40x20 Cable Duct for 4040 Aluminium Profile

This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.

Pobrania
458
Polubienia
69
Ocena
5
P
PrintablesThimira

Fan Bracket for LSI 9207-8i with 40x20mm Fan (NF-A4x20)

This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…

Pobrania
383
Polubienia
36
Ocena
5
P
Printablessuit

Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan

Print from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example. Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm

Pobrania
375
Polubienia
50
Ocena
4,25
P
PrintablesMonson_Makes

IKEA SKADIS PEGBOARD 240X200X5

Bigger is better, amiright?

Pobrania
331
Polubienia
91
Ocena
0
P
PrintablesDantak

Basic set of inserts for cantilever tool sewing box 240x205

Basic set of inserts for 240x205 variant Top and middle inserts are third of the width so you can combine them however you want. Screw inserts are meant to be used together. All inserts have 45° chamfer so you can take them out and for…

Pobrania
255
Polubienia
68
Ocena
5
P
PrintablesBasementLAB

2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm

2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm Spec: Hole diameter 4.2mm (M3-M4 Socket Head) Slot 8.5x17.2mm Suitable for: 20x20mm extruded aluminium…

Pobrania
251
Polubienia
45
Ocena
0
P
PrintablesMM Bavaria

SATSANA Remix for Creality CR-10 / Ender 3 Micro Swiss Direct Drive + BLtouch + 40x40x20 Fans

Is a remix of https://www.thingiverse.com/thing:4408571 . Fan duct for Creality CR-10 / Ender 3 printers with Micro Swiss Direct Drive Extruder. Suitable for 40x40x20 fans and BL-Touch. BL-Touch offset X=-46 Y=-9 The holes for the fans…

Pobrania
247
Polubienia
29
Ocena
5
P
PrintablesDaisbear

90 degree Angle Bracket 40x40x20mm

Customized version of https://www.thingiverse.com/thing:2430655 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2430655 Print Settings Printer: JGAurora A5 Rafts: No Supports: No Resolution: 0.2 Infill:…

Pobrania
240
Polubienia
14
Ocena
0
P
PrintablesVilius

Ender 3 v2 Mainboard / motherboard cover with 40x40x20 fan

Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…

Pobrania
224
Polubienia
26
Ocena
3,5
P
PrintablesAWSW

Seed Dryer 50x50mm with 5 trays for 40x20mm fans

Small seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 5 trays with the size of 45x45x10mm. The trays fit tight with a 0.3mm gap into the tray holder. The fan…

Pobrania
206
Polubienia
60
Ocena
5
P
PrintablesSolath

Snapmaker U1 40x20mm fan mount for x,y driver cooling - clip-on

Holds a 40x40x20mm 5vdc fan between spools 3 and 4 of the Snapmaker U1. Clips into the existing vent holes so no need to disassemble or modify the case or use tape. Remix of Full_covered_40mm_fan_cover_aimpoint.stl by pakkko/Dennis Romje.…

Pobrania
205
Polubienia
38
Ocena
4,5
P
PrintablesEldarHan

Creality Ender 3 v2 - Clean Shroud (40x20mm Fan & Stock 4010 Blower)

This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2. The…

Pobrania
202
Polubienia
27
Ocena
5
P
Printables13lubushby

40x20 Aluminium Extrusion

A 80mm length of 40mm x 20mm aluminium extrusion

Pobrania
150
Polubienia
18
Ocena
0
P
PrintablesMateo Cruz

MKS TS24-R V2.1 Case for 40x20 profile

Made this mount for a custom CNC with 40x20 aluminum profile with DLC32 MKS board. With 8 M3x8 insters on the base parts.

Pobrania
137
Polubienia
6
Ocena
0
P
PrintablesAdam Pochtiol

Krytka do Jeklu 40x20

Krytka do Jeklu 40x20

Pobrania
124
Polubienia
8
Ocena
0
P
PrintablesShaggy

LSI 9400-16i 40x20 Fan Shroud

Remix of the 20mm 16i fan shroud to fit a 9400-16i May fit others but I've only tested With that. Made it slightly wider to clip over the PCB rather then under the heat sink. Included a .dwg that contains 1 object all merged together and…

Pobrania
115
Polubienia
17
Ocena
4
P
PrintablesJanovich

Sprite Extruder - Silent Fan Adapter (40x20)

Noctua 40x20 Fan Adapter for the Creality Sprite Extruder Place for Buck converter Mounts without ANY screws Ultra Lightweight Prints without ANY support material

Pobrania
112
Polubienia
20
Ocena
0
P
PrintablesPaddes

Fan Cover 40x40x20

Designed to fit with Noctua 40x40x20mm fan. Other fans with the same size might work too. Filament color change after the mesh has been printed for 2-color look.

Pobrania
106
Polubienia
14
Ocena
0
P
PrintablesAndys1957

Open Cable Chain with Clip 40x40x20mm

Open Cable Chain with Clip 40x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories

Pobrania
102
Polubienia
9
Ocena
4,5
P
PrintablesCharlotteBeLike

Ender 3/40x20mm extrusion feet

Some simple feet I made for my Ender 3. just pop them in and they'll stay there secure :)

Pobrania
95
Polubienia
3
Ocena
0
P
Printablesagorafalaht

Hinge for 40x20 profile.

Hinge made in Fusion 360 to put acrylic door on my CoreXY

Pobrania
93
Polubienia
23
Ocena
0
P
PrintablesMigyololol

Ram Cooler duct 4 slots 40x20

I remixed tsuga's Ram cooler, as i wanted to use it on 4 slots and have a 40x20. I threw the other two together for anybody else with special wishes.

Pobrania
93
Polubienia
7
Ocena
0
P
PrintablesHuDSoN

Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan

Had to remix the duct as my heatsink measured 20.75mm tall. Also seemed to be deeper so I had to remove the side so 2 fins could poke through and allow the duct to sit in the correct place.

Pobrania
79
Polubienia
9
Ocena
5
P
Printablesplammers

Creality CR10s Pro Extended fan shroud (40x20mm fan)

This is a re-creation of the stock hotend fan shroud on the Creality CR10s PRO. I found the stock 40x10mm 24v hotend fan is pretty loud, but replacing this with a 12v Noctua 40x10mm fan may not provide enough airflow. I wanted to use a…

Pobrania
77
Polubienia
6
Ocena
0
P
PrintablesGrandGnome

Ender 3 Max 40x20 Cooler

Will have to use a drill or something to make the holes for the blower fan useable. This might not print in Simplify3d, as it has some weird errors there. It works in Cura though. Using the original, I patched it up in blender, because I…

Pobrania
73
Polubienia
9
Ocena
0
P
PrintablesNico

Micro Swiss NG Dual 5015 Fan housing for 40x20mm noctua fan

I edited Conors original file so it could fit a Noctua 40x20mm fan. Sadly he didn't gave me the stp file of the alternative version with seperate part cooling chambers so I had to work with the stl and it might be inaccurate at some…

Pobrania
71
Polubienia
13
Ocena
0
P
PrintablesJTK Engineering

Ender 3 / 3 Pro Fan Shroud for 40x20mm Fans

I use my Ender 3 Pro a lot, and thanks to that, both my Hot end fan and Parts cooling fan both gave up on me. This gave me a chance to upgrade each of them to a 40x20 hot end fan and a 40x20 parts cooling blower fan. I designed this to…

Pobrania
61
Polubienia
7
Ocena
0
P
PrintablesTrase

40x20 Pipe Leveling Feet

Recently I built a table with legs from 40x20 tubing. And I found out, that my floor isn't really flat, so I needed some leveling feets to level the tabletop and make the table stand still. Minimum height of the feet is 32mm, maximum is…

Pobrania
57
Polubienia
11
Ocena
0
P
Printablesmeagerfindings

40x20x10 REMIX of J-Channel Cable Organizer, Holder, Management, Raceway, Hanger

Shorter remix of a very useful J-Channel Cable Organizer

Pobrania
56
Polubienia
7
Ocena
4
P
PrintablesSarge955

Silica Gel Container Ø40x200mm Diameter

Remixed to be 200mm long, and mounted inside lid of drybox.

Pobrania
55
Polubienia
3
Ocena
0
P
PrintablesTeddan85

40x20 Fan housing

Was in need of an housing to one of the fans for my Ender-3 V2. I tried to search for something, but ended up with nothing, so this was made this morning in Fusion360. Printed on my Anet ET4Pro, with Fiberlogy EASY-PLA Alien Green filament.

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesS3DP

240x200mm Parts Assembly Tray

Small components parts tray for assembly/disassembly of equipment. Prints on MK3 MK4 print area. Filleted corners in base for easy removal of small parts even if you have fat fingers. Designed to use minimal material without being too…

Pobrania
47
Polubienia
5
Ocena
0

0059_Patas escalera perfil 40x20

Patas para las escaleras tipicas de pintar, que siempre estan rotas, si el suelo es resbaladizo, se recomienda hacerlo en material BOUN, o un semiflexible duro , quizas tambien en petg , . el perfil de la escalera debe de ser de 40x20.

Pobrania
44
Polubienia
5
Ocena
0
P
PrintablesMAKERTEAM®

MT-SYSTEM tool wall adaptors (like BOTT etc.) for 40x20 profiles

We made these little helpers for easy mounting of 40x20mm aluminium construction profiles to tool wall systems with (9,7x9,7mm) SQUARE holes as made by BOTT CONTORION KAPPES KRAFTWERK ROCHOLZ VIGOR and many others There are TWO versions…

Pobrania
37
Polubienia
24
Ocena
0
P
PrintablesXP3Design

Air tight box 40x40x20mm

This is a Air tight box . Contains 3 different part. 1. Bottom part prints with PLA or other plastic 2 top lid part - Print with PLA or similar plastic. 3. Gasket - use TPU , and TPC material to print Rubber-like material. (Please use…

Pobrania
35
Polubienia
2
Ocena
0
P
Printablesalperbayram

Ender 3 V2 / Pro motherboard cover for 40X20mm fan (no support)

This is a remix of 'Ender 3 V2 & Pro Silent Motherboard' by scaryPug Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. Print settings are same with original. Print 2test_motherboardCover_single4020Fan.STL to see if your fan fits.…

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesScott Gibb

MXx40x40x20 Extrusion Brackets

MXx40x40x20 Extrusion Brackets Summary This thing/printable is a collection of Brackets for use with 20x20 extrusion. Specifically this is designed for 40x40 bracket sizes applied on 20x20 extrusion. Within this page you also get an MX…

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesPetr

V-slot 40x20 spec

V-slot 40x20 spec

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesMortalWombat

Dual 5015 + 40x20 fan shroud for Longer LK1 / Alfawise U20 U30

I really liked CyfroN's fan housing. I love how it's a single part that is easily and quickly attached/removed from the gantry plate without having to disassemble anything (unlike most other big fan mods). But I felt it could use some…

Pobrania
33
Polubienia
1
Ocena
0
P
PrintablesPedroKV

Cable channel 40x20mm to 20x20mm adapter/cover

Odbočky/redukce na instalační kanály

Pobrania
33
Polubienia
8
Ocena
0

U1 Stepper Treiber Lüfter 40x40x20

Anderes Gehäuse mit passgenauer Befestigung. Für den Lüfter ist auch keine Schraubbefestigung erforderlich Benötigte Teile: 1x Lüfter 40x40x20mm Kühler 5V https://de.aliexpress.com/item/1005006212685458.html 1x USB Typ A Männlich 4 Pin…

Pobrania
32
Polubienia
6
Ocena
3
P
Printableskampfratte

BIQU H2 MK4 Remix for 40x20 Noctua and Bed Leveling Sensor [i3 Mega X-Carriage]

Ich habe das Originale Modell nochmal angepasst, um meinen 40x20 Noctua Lüfter und einen Auto Leveling Sensor anzubringen. Außerdem wurde hier noch die vordere Strebe etwas dicker gemacht, damit das Teil nicht bricht. Viel Spaß beim Tunen…

Pobrania
32
Polubienia
6
Ocena
0
P
PrintablesNikolaus

Ladder Feet 40x20mm

Remixed feet for 40x20mm

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesAndreas Otto

40x40x200mm Cable Channel

I designed this cable channel for managing the vast amount of USB cables on my sim rig. I printed both channel and lid in an upright position for more stabililty / flexibility of the latches. As you can see in the gcode, I orientated the…

Pobrania
29
Polubienia
6
Ocena
0
P
PrintablesMario L

Ladder feet 40x20mm

Replacement plastic foot for domestic aluminium ladder with three steps and 40x20mm profile. In order not to reduce the strength of the foot, it is pressed horizontally as it is for loading the model. Printing without supports - the model…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesCristi

Double hook for 40x20mm metallic bar

I need some fairly solid hooks to hang various objects above my head in the garage. These hooks should be attached without drilling to a grid fixed on the ceiling of the garage made of 40x20 metal bars (anyhow, I left a screw hole in the…

Pobrania
28
Polubienia
4
Ocena
5
P
PrintablesStefan Hoschka

MS-01 /MS-A1 Topside Wallmount with 3x 40x20 Fans

Hello I made a wallmount for my Minisforum MS-01 with 3 40mm fans for additional cooling without destroying or modifying the case of the MS-01. With this u can wallmount your MS-01 or MS-A1 on the top side, where the CPU cooler sits. The…

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesJinRoh

Silica Gel Container Ø40x200mm with Magnet Mount

BoM: 8 Pcs . 6x3 magnets 2 Pcs . M3x6 BHCS 2 Pcs . M3 HammerheadNuts SIlicagel

Pobrania
25
Polubienia
7
Ocena
0
P
Printablesskino

Ender 3 40x20 extrusion cover

One of these is probably out there already but it was quicker to mock one up myself and print it than it was to search for something online. Its dead simple, nothing fancy. small chamfer on the edges and two pins to hold it in place,

Pobrania
24
Polubienia
2
Ocena
0
P
Printableshappy pike

Silicagel Box 70x40x20

Moin und servus, ich habe hier für euch meine Silicagel boxe rein gestellt, Masse sind 70x40x20mm einmal mit Füße und schiebe Technik und einmal ohne Füße mit umlaufender Nut, !!Achtung!! nur der eine Deckel passt Auf die richtige Box.…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesPT3DArt

Pflanzenschild 40x20-80

Beschilderung von Pflanzen, Topf oder Garten Schildgröße 40x20mm 80mm-Stiel

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesWiderporst

feet/shoes for a folding ladder 40x20mm

The other day I bought an aluminum ladder from a reputable manufacturer as part of a special offer. The ladder was perfectly fine, however, the feet were completely unsuitable for use in the apartment (they had rude PP plastic shoes with…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesMrgooder

interskol clip+magnet 40x20

крюк и магнитный держатель для шуруповерта ИНТЕРСКОЛ МиниМАКС ДА-10/12В

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesMake it Reality

40x40x20 fan

Use slow speed, .2 or .1mm layer hight for best results. Overhang settings 230% width or supports.

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesFELIX-NEWCAL

Beraing 80x40x20

Bearing simple. Out: 80mm In: 40mm Height: 20mm STL file.

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesThomllama

40x20 fan mount and ducts with wire management

Designed a fan mount/adaptor to use a 40x20 fan to replace the standard 50x15. Fan is smaller and quieter . Some 50mm fans are also too powerful and can result in lowering the hotend/nozzle temps and make the temps fluctuate more as well…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesYgor Amaral

Dual blower duct fan 50x15mm case with hotend fan 40x20mm (Ender 3 V2).

I've always been looking for a dual blower fan cover (must exist) 50x15mm with hotend fan 40x20mm, but I've never found one. That's why I propose this hotend cover for Ender 3 V2. At 150mm/s speed (PLA) it's not perfect, but there is a…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesPetr

roh v-slot 40x20

roh vslot 40x20

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesMike Rainbow

Ender 3 V2/Pro/5 Direct Drive Noctua Fan Shroud 40x20x2

08/08/22 I Have reprinted the redesigned version in CF Nylon, no more heat sag or softening also the LEDS 24v didnt last at 24v so have re done them with a 12v supply pics included Ok redesigned and Final So having downloaded and printed…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesSkullKill

CR-10s Pro Main Board Fan - 40x40x20mm

Migrating from thingiverse https://www.thingiverse.com/thing:3807931 remix to fit a 40X40X20mm fan https://www.thingiverse.com/thing:3399705 the 2 mount screws for the fan are threaded M3 holes, but printing with a resolution of 0.2, the…

Pobrania
20
Polubienia
2
Ocena
0
P
Printablesloicloic

40x20mm Magnet Box

This is a box to protect a 40x20 magnet or to be protected from it! The magnetic field will still be effective through the case but way less strong, removing a bit of danger of handling this bad boy around! If you enjoy or find this model…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesPedroKV

Cable channel 40x20mm cable T holder

Cable 'T' holder helping to hold cables in channel during installation. Fits channel 40x20mm. Needed to be printed with 0.2mm nozzle! "T" držák kabelů v instalační liště 40x20mm. Pomáhá přidržet kabely během instalace. Nutno tisknout s…

Pobrania
20
Polubienia
6
Ocena
0
P
PrintablesZultax

Noctua Fan Cover (40x20mm)

Push fit fan covers for 40x20mm noctua fans 0.2 layer height no supports

Pobrania
19
Polubienia
3
Ocena
3
P
PrintablesprintwithmeXYZ

40x40x20mm Part Cooling Fan - Reinforced for S+E Titan Extruder for Prusa i3 MK2

Slightly raised the mount (1mm) so the fan clearance is higher and added reinforcement to the mounting stem. Printed in PETG since I didn't want to print in ABS. Working just fine. Clearance is great! Category: 3D Printer Parts

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesSoSimple

CR-10 Fang for 40x40x20mm Fan Cooler with CR / BL Touch

I remixed this design so that I could mount my CR-Touch with the original metal mount.

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesCedro 22

Lamp tripod to 40x20 aluminium extrusion adapter

Simple adapter to mount a 40x20 aluminium extrusion to a Lamp tripod (walimex FT-8051). BOM : 4x M5x8 screews 4x M5 t-nuts 4x M4x12 screews 4x M4 nuts You will need 4x M4x12 screews and 4x M4 nuts to mount the 2 plastic parts around the…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesNandito

Grapa tslot 40x20

Grapa tslot 40x20 Print Settings Printer Brand: Zonestar Printer: Z10M2 Rafts: No Supports: No Resolution: 0,2 Infill: 30 Filament: BQ pla/abs Negro Notes: Grapa tslot 40x20,el cableado queda perfectamente ordenado, son fáciles de…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesJimbo

IKEA Jansjö - Halter für 40x20 Profil

Dies ist ein Halter um eine IKEA-Jansjö Lampe oben rechts an den Ender 3 Pro zu schrauben. Natürlich passt die Lampe auch an jedes Andere 40x20 Profil. Somit hat man das perfekte Arbeitslicht. Print Settings Printer: Creality Ender 3 Pro…

Pobrania
17
Polubienia
3
Ocena
0
P
Printablesbvd

Angled Wedge Clamp for Balcony Railing (40x20 mm, Ultra-Strong, 3D Printable)

This is a high-strength 3D-printable angled wedge clamp designed for standard 40x20mm metal balcony railings. Purpose: Securely hangs lanterns, hummingbird feeders, or small planters outside, without scratching or damaging your railing.…

Pobrania
17
Polubienia
8
Ocena
0
P
PrintablesJHAres

Tornado Fan Duct (by Pasha Linker) remixed for 40x40x20 fan

I downloaded the nice fan duct by user Pasha Linker (from FB group "Flyingbear Tornado Owners" ), but using a 40x40x20 fan the head bumps in the frame so I modded the duct for a lower profile to accomodate the bigger fan. Lots of…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesNandito

Kingroon KP3S adaptador ventilador 40x40x10,40x40x20

Kingroon KP3S adaptador ventilador 40x40x10,40x40x20, menos ruido y mas flujo Print Settings Printer: Kingroon KP3S Rafts: No Supports: Yes Resolution: 0,2 Infill: 50 Filament: Smartfil PLA Negro Notes: Con un ventilador Noctua ,no el de…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesGreg FRISON

40x20 V-profil End

For CNC3018 project

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesPatBlo

Embout moulure électrique 40x20

J'ai besoin d'un embout pour utiliser une moulure 40x20. Réalisé sous FreeCad avec du PLA blanc. le perçage est de 12 mm. Les fichiers pour les embouts sans trou sont joints.

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesTomoaki Shimazu

Noctua 40x40x20 Fan Cover

Noctua fans are extremely quiet, but their only weakness is that the fan blades are exposed. So I made a cover that can be easily placed over them. I designed it to sacrifice as little of the quietness as possible.

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesKyrian

Platine CM Noctua - 40x40x20

Ayant un lot de ventilateurs Noctua 40x40x20, plutôt que de racheter un 40x40x10 (bonjour le prix) pour la CM, j'ai préféré modéliser cette platine en y intégrant le convertisseur DC-DC 24V/12V et deux borniers. Les borniers sont collés…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesPeite

Cube Longtail Auer Eurobox Halter 60x40x20

Da der Aufsatz für den Cube Longtail Gepäckträger etwas größer ist als die Auer Eurobox 60x40x20, rutschte und klapperte die Box beim fahren. Ich habe mir damit geholfen, das ich Abstandshalter entworfen habe. 4 Stück für die Seiten, und…

Pobrania
12
Polubienia
5
Ocena
0
P
PrintablesCedro 22

Adapter plate for Reolink P750 to 40x20 aluminium extrusion

Simple adapter to attach the camera support from the Reolink P750 (Reolink Duo 3 PoE) to a 40x20 aluminium extrusion. BOM : 3x M4 nuts 1x M4x12 screew 6x M4x8 screews 4x M4 t-nuts You will need 3x M4 nuts, 2x M4x8 screews and 1x M4x12…

Pobrania
12
Polubienia
0
Ocena
0

Wire holder for 40x20mm steel pipe

Wire holder for 40x20mm steel pipe

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesMarkPk

Display frame for panel mounting, for mounting hole 40x20 mm, panel thickness 4mm

Display frame for panel mounting, for mounting hole 40x20 mm, panel thickness 4mm

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesDaniel Jacinto

PERC H310 40x20 fan bracket - 20mm thick fan

The same as the original model just fits a larger fan.

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesCedro 22

Adapter plate for ANNKE I91DX (or FCD600) to 40x20 aluminium extrusion

Simple adapter to attach the camera support from the ANNKE I91DX to a 40x20 aluminium extrusion. BOM : 2x M4 nuts 2x M4x16 screews 4x M4x8 screews 4x M4 t-nuts You will need 2x M4 nuts and 2x M4x16 screews to fix the plastic plate from…

Pobrania
8
Polubienia
0
Ocena
0
P
Printableschesamo

Double (40x20) profile cord retainer

Just a simple cord retainer for profile railings based on some clips that came with my printer. I couldn't find a printable version, so here you go. The .scad file has a few variables you can tweak if you want. The sample was printed with…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesMilan Santa

Rukojeť skříňky (nábytková rukojeť pro profil 40x20)

Rukojeť skříňky (nábytková rukojeť pro profil 40x20)

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesMike Rainbow

Creality Spider 2.0 Fan Cover-Noctua 40x20 x2

Creality Spider 2.0 Fan Cover-Noctua 40x20 x2 Required: M3 inserts x8 M3 bolts 25mm x8 M3 bolt 10mm x2 (longer CR touch bolts required to allow the 6mm bracket) 40x20 Noctua fans x2 Ive recently upgraded my hot end to a creality Spider…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesNase

EK AIO Dual 40x20mm Fan Bracket

You probably don't need this. I had a very specific situation where I could only fit a slim 120mm fan over my AIO's radiator. I designed this to fit a couple of extra fans on the inside of my case to help push air out through the rad.…

Pobrania
6
Polubienia
0
Ocena
0
P
Printablespalehorse102
Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesMuadh_14 :P

Keychain Base 40x20mm

This is a base for a keychain which is 40x20mm. I recommend to add the text in your slicer but you can do anything you want. Also if you wanna do multicolor make sure to add the pause at layer 11 (2.20) if printing with 0.2 layer height.…

Pobrania
6
Polubienia
3
Ocena
0
P
PrintablesIvorVra

Raspberry pi 4 40x20mm fan top case only

I only had a 40x20mm fan available so i had to print a different top case for the rp4.

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesMig Anxo

Soporte Reforzado para Buzón Americano (Perfil de Barandilla 40x20mm) - Sin Taladrar

🇪🇸 Español Este sistema de montaje permite instalar un buzón de estilo americano en barandillas de aluminio con perfil rectangular de 40 mm de ancho por 20 mm de alto . El diseño evita tener que taladrar el metal, protegiendo el lacado y…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesHonza

záslepka do profilu 40x20

PETG tryska 225°C, podložka 80°C

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesMADOS 3D

MADOS 40x20mm Cover - MADOS-20CE - Modular Building Block

See more information on this Part at mados-20ce 0.2mm Recommended layer height For best results, use Classic perimeter generator and one wall/perimeter on top and bottom layers. Print the recommended STL file first. If the joint is too…

Pobrania
1
Polubienia
3
Ocena
0

Tapa perfil metálico 40X20

Es una pequeña tapa para colocar en un perfil de acero al carbono de el tamaño de 40X20 en 2mm

Pobrania
1
Polubienia
1
Ocena
0
P
Printables

40x40x20 fan

Use slow speed, .2 or .1mm layer hight for best results. Overhang settings 230% width or supports.

P
Printables

Noctua 40x40x20 Fan Cover

Noctua fans are extremely quiet, but their only weakness is that the fan blades are exposed. So I made a cover that can be easily placed over them. I designed it to sacrifice as little of the quietness as possible.