Wyniki wyszukiwania: 43mm

Sortowanie

141 modeli

P
Printablesimhavoc

43mm-67mm Lens Cap Holder — Thin Camera Straps, 8 Minute Print

Keeps your lens cap on the strap instead of in your pocket, in the bag, or on the floor of a parking lot. Prints in under ten minutes from whatever is left on the spool. Fits — the cap Any 43mm-67mm center-pinch lens cap. Retention is on…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesAntigreen

MPCNC Primo AMB 1050 FME 43mm tool mount

This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…

Pobrania
516
Polubienia
21
Ocena
0
P
PrintablesJNSN

Gravel Bike Stand 41-43mm

The bike stand is fitting for all popular gravel bike tires. I made it possible to print all parts on Prusa Mini. I glued the parts together with a Loctite plastic superglue. designed for 28 inches tire, works for smaller tires as well.…

Pobrania
454
Polubienia
102
Ocena
5
P
PrintablesWiseone

Sushi Maker 202x43mm

As a family, we like sushi nori rolls. Making it at home means we can come up with our own stuffings. This sushi maker is a revision to my past design. Perhaps not traditional Japanese, but we find it useful. This design accommodates the…

Pobrania
399
Polubienia
60
Ocena
5
P
Printables3DDailey

Stream Deck Plus Knob 20.43mm

Knob to fit stream Deck Plus. Larger than original but still gives plenty of space between each knob.

Pobrania
342
Polubienia
40
Ocena
5
P
PrintablesThe Bravan

Dremel to 43mm Adapter

I made this to fit one of the better and higher quality drill-stands available(AEG) which has a full-length 25mm deep 43mm hole, which is why the top incline is there to allow access to the spindle-lock and the flats on the Dremel…

Pobrania
338
Polubienia
32
Ocena
4,67
P
Printables72pxldotcom

Rotary Tool Drill Press/Stand Adapter for ~43mm Clamps and Dremel Thread

~43mm clamp adapter for rotary tools with a Dremel style thread. A new design based on the Drill Press - Rotary Tool Adapter from @AddictiveManu_272921 . I printed with ABS, 4 perimeters and 15% infill with the flange side down.

Pobrania
312
Polubienia
72
Ocena
5
P
Printablespeter wall

Spice Rack 6x and 7x / 43mm diameter

The 6x spice rack can be printed normally, but the 7x should remove the poopline once the poopline has been printed so it will be printed in the model (printed with P1S). Both are 43mm in diameter.

Pobrania
288
Polubienia
183
Ocena
0
P
PrintablesStingrayZA

43mm Fork Seal Driver

This is a very easy print to create a fork seal driver to install new fork seals on my ZX-12R without damaging the seal. I'm planning on creating some for my other bikes as well, so keep an eye out :) If you want other sizes, just give me…

Pobrania
259
Polubienia
22
Ocena
5
P
Printables3DPrintM.D.

Prusa MINI/+ PTFE Hotend Tube Cutter Guide (43mm)

Use this tool to accurately measure (43mm) and squarely cut Teflon PTFE tubing for a Prusa MINI/MINI+ . Requires X-ACTO knife . 5ft of PTFE Teflon tubing (2mm ID x 4mm OD) for 1.75 filament Bowden 3D printers can be purchased for about $7…

Pobrania
257
Polubienia
46
Ocena
5
P
PrintablesRolf Bakker

LM2596 step down 21x43mm mount

This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for the popular 21x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That…

Pobrania
237
Polubienia
33
Ocena
5
P
Printablesapopticon

43mm To 50mm Vacuum Hose Connector

I needed to connect a 50mm vacuum hose to a 43mm vacuum hose. Modeled in Fusion360. Printed in PETG, but probably any filament should work. No supports needed.

Pobrania
222
Polubienia
36
Ocena
0

8020 Fan Mount for 120 mm fan - 43mm wide

An 8020 Fan mount for a 120MM fan with a depth of 43mm. Print instructions Category: Electronics Summary An 8020 Fan mount for a 120MM fan with a depth of 43mm. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution:…

Pobrania
214
Polubienia
38
Ocena
0
P
Printablessometimes_erik

Fork Seal Driver Tool - 43mm with Alignment Pins (KTM/Husky/GasGas)

This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…

Pobrania
213
Polubienia
24
Ocena
5
P
PrintablesBen Carlisle

HSW Tamiya 43mm Basket

Small holder for Tamiya 43mm bottles. Printed in PLA+ - 3 top, 3 bottom & 3 wall @ 0.2mm height. Solidworks file included.

Pobrania
196
Polubienia
45
Ocena
5
P
PrintablesCameron Jones

Rollei 35AF 43mm Filter Adapter

I've designed a 43mm filter thread for the rollei. It's the largest thread I could make without interfering with the light sensor which is very close to the lens. It's push fit and twist to lock it in between the ribs of the lens. Take…

Pobrania
179
Polubienia
14
Ocena
5
P

Universal rim cap (43mm hole)

Simple rim cap for 43mm hole. it meant to be used with car stickers (50mm) bought on aliexpress.

Pobrania
165
Polubienia
25
Ocena
5
P
Printablesyukosteel

Voigtlander 35mm F1.4 / 40mm F1.4 / 50mm F1.5II / 28mm F1.5 Nokton Leica M lenses - hood mount protector ring 43mm

Hood mount protector ring for Voigtlander 35mm F1.4 Nokton Leica M mount lens. It should be also compatible with few lenses that also have 43mm filter thread: Voigtlander 28mm F1.5 Nokton Leica M mount (untested) Voigtlander 40mm F1.4…

Pobrania
164
Polubienia
10
Ocena
0
P
PrintablesNightView

FlashForge AD5X 43mm Spool Holder Adapter – Fix Small Spools Not Fitting

Fix for Small Spools Not Fitting on the FlashForge AD5X This adapter is designed to solve a common issue with the FlashForge AD5X: many 43mm inner diameter spools don’t fit properly on the factory spool holder. This model allows smaller…

Pobrania
154
Polubienia
10
Ocena
5
P
PrintablesDrTob

Adapter Triton TRA001 to 43mm (Miele) hose

Adapter for Triton TRA001 to a 43mm suction hose. (Miele) (Left handed thread!)

Pobrania
136
Polubienia
15
Ocena
0
P
PrintablesZXAtari

Bath plug 43mm

Just a plug! Use to your bathtub, sink etc.. 43mm print with TPU Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 15% **Filament:** efilament 3d TPU Green Category: Bathroom

Pobrania
119
Polubienia
5
Ocena
0
P
PrintablesLinus1997

43mm, 46mm and 49mm to 39mm step down/up filter lens ring for Alum Panomicron v2 Adapter

A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…

Pobrania
116
Polubienia
5
Ocena
0

Soldering Iron adapter 43mm euro neck (Threaded Insert Press)

The adapter has an inner diameter of 16 mm and is compatible with my cheap chinese JCB soldering iron. It also fits the Proxxon drilling and milling bench BFB 2000 with its outer diameter of 43mm. This means it can fit any drill stand…

Pobrania
99
Polubienia
23
Ocena
5
P
Printablesjmpickard

Laowa bayonet to 43mm camera lens filter thread adaptor

This is an adaptor to allow attachment of a standard 43mm male threaded part to the Laowa 25mm 2.5-5x macro lens bayonet mount. It has been tested with the Raynox DCR-250 super macro conversion lens and seems to work well. Printed at…

Pobrania
95
Polubienia
5
Ocena
0
P
PrintablesTobiasz Zysk

Camlock 43mm

camlock for 43mm reinforcement pipe

Pobrania
91
Polubienia
11
Ocena
0
P
PrintablesMr.MaWe

Adapter Parkside Feinbohrschleifer auf 43mm Bohrständer

Parkside Feinbohrschleifer Adapter für 43mm Eurohalsaufnahme Innengewinde passend nur zu Parkside. gedruckt in PLA 100% Infill

Pobrania
86
Polubienia
1
Ocena
0
P
PrintablesBradley Norman

Olympus XA 43mm/49mm lens attachment

This lens holder is designed specifically for the Olympus XA rangefinder camera. It accommodates a 43mm filter, which minimally obstructs the lower portion of the viewfinder, ensuring accurate framing while taking photos. The design…

Pobrania
85
Polubienia
14
Ocena
4
P
PrintablesErwinDesmond

LM2596 (43mm) Case + 2x Wago 221

LM2596 Case + 2x Wago 221 slots I have a seccondary fire alarm in my enclosure, that needs 9V. So i made an enclosure that holds 2 wago wire splices. I reccomend you to get a small 1-2mm drill bit. Printing holes this small is kinda hard.…

Pobrania
82
Polubienia
12
Ocena
0
P
PrintablesOle S.

Mattebox Clamp adapter 143mm to 100mm

Hey Folks, here is a clamp adapter for cinema lenses with a 100mm front diameter. I use this in combination with the wooden camera UMB-1 and was modelled after the adapters that came with that kit.

Pobrania
76
Polubienia
10
Ocena
0
P
PrintablesPrzemekgda86

43mm Hygrometer TH05 Mount for Anycubic Ace PRO (NEW VERSION)

Mount for the new version of ACE PRO from the Kobra S1 COMBO set, designed for a temperature and humidity sensor 43mm from Aliexpress.…

Pobrania
73
Polubienia
15
Ocena
0
P
PrintablesCaptNemo

43mm Hepa filter container for X1C BentoBox v1

Remix of the BentoBox hepa filter container and bracket to fit the 43mm wide filters I got through the Amazon link.

Pobrania
73
Polubienia
8
Ocena
5
P
Printablesnles

WorkBee CNC router dust shoe for 43mm router

Things changed from the original design: Resized the router hole (43mm) Moved the router hole slightly to make sure the dust shoe can be installed in the right orientation with the 43mm aluminum router spindle mount Different router…

Pobrania
73
Polubienia
3
Ocena
0
P
PrintablesSeth Overbeek

Gridfinity 1x1x4 with hole 12mm- 43mm

This is a gridfinity 1x1x4 block with holes from 12mm to 43mm. Measure what you want to hold and add 2mm to it. Then you will have a custom holder for what ever you want. As long as you have a caliper you have the prefect file for what…

Pobrania
72
Polubienia
10
Ocena
4
P
PrintablesVytux

Tripod Ball Mount 43mm 17mm

Quick Release tripod mount 43mm to a 17mm ball for attaching common car phone mounts to a tripod. I designed this for astrophotography use but I can see other uses where a stable tripod mount for a phone would be ideal. This version fits…

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesJon

43mm Camera Quick Release Plate and Mount

It's a 43mmx43mm Camera Quick Release Plate and Mount I designed it to have embedded screws and rods and use rubber bands for tensioning. I will post a picture once I have it assembled. I might add additional versions as I iterated so far…

Pobrania
63
Polubienia
3
Ocena
0
P
PrintablesSamuraiUK

TT120 Track spacer 43mm

Just some simple 43mm Hornby track spacers for laying track This example was printed in PETG as its what I had loaded at the time but should be fine in PLA PLA 0.2 Layer No supports Print as orientated with text on the plate

Pobrania
61
Polubienia
5
Ocena
0
P
PrintablesKirill_Maker

M4 M5 Knob 43mm

Multipurpose (bed leveling, etc) knobs with 43mm diameter. For brass inserts melting in: M4 (height 8mm) M5 (height 9.5mm)

Pobrania
60
Polubienia
7
Ocena
5
P
PrintablesTim Fischer

Honeycomb Flashlight holder Olight R50 HSW 43mm

This is a little holder for a Olight R50 Flashlight. It should also work for the Pro variant, but measure first. The holder has a 43mm x 28mm Hole, if you want to use it for anything else. It has a print in place insert attached and can…

Pobrania
58
Polubienia
9
Ocena
0
P
PrintablesJBoe

Soldering iron adapter for ø43mm drill stand

Object description: Soldering iron adapter for a ø43mm drill stand. Inner diameter = 20mm to fit best for a cheap soldering iron from SREMTECH. The model is supplied in 4 versions. The versions with text can be simply printed in two…

Pobrania
58
Polubienia
6
Ocena
0
P
PrintablesStudioMaell

Ventilation Grate 140x143mm

We placed a cat flap in our door, but now that we're moving out the landlord wants us to close it up. Therefore I made this ventilation grate, which can be used for closing any sort of large hole that you want to remain ventilated.…

Pobrania
56
Polubienia
3
Ocena
0

Invicta 43mm Watch Opening Tool

Tool for unscrewing the back cover of a wristwatch case. For replacing the battery. The exact dimensions are shown in th

Pobrania
55
Polubienia
2
Ocena
0
P
Printablesdragon0504

Canon EFM 22mm f2 lens 43mm thread filter case (45.7mm X 5.5mm)

This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside…

Pobrania
55
Polubienia
7
Ocena
0
P
PrintablesGoldenBoyGarage

Fork seal driver, 43mm and 35mm

A few fork seal drivers, if you need additional, let me know and I can make them pretty quick!

Pobrania
54
Polubienia
2
Ocena
0
P
Printablesdragon0504

Canon EFM 22mm f2 lens 43mm thread filter case (46.2mm X 8.1mm)

This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside…

Pobrania
54
Polubienia
7
Ocena
0
P
PrintablesRolf Bakker

Single relay mount 24x43mm

This is a remix of http://www.thingiverse.com/thing:825862 , snug fit for 24x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That way it is…

Pobrania
54
Polubienia
10
Ocena
0
P
PrintablesUzduz

NALGENE - Sipper - Trinkaufsatz 500ml (43mm)

Ensures that no more liquid than necessary comes out of the conveniently fillable wide-neck bottles.

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesShakky4711

Proxxon Micromot Adapter 20mm auf 37mm & 43mm Spannhals

Adapter um Proxxon Micromot Geräte mit 20mm Aufnahme in eine Bohrmaschinen Tischklemme einzuspannen. Eine Version für meine alte Tischklemme mit dem ungewöhnlichen Durchmesser 37mm, die Zweite für den normalen 43mm Euro Spannhals…

Pobrania
51
Polubienia
8
Ocena
5
P
PrintablesFrossenBanan

Parametric lens cap (43mm–72mm) + FreeCad file

Modular lens cap Intro This project was primarily created for me to practice and learn more about designing in FreeCAD. While you'll find many other lens cap designs on Printables that may offer stronger springs or better functionality,…

Pobrania
51
Polubienia
3
Ocena
0
P
Printablesriethmueller

Clamp for 43mm antenna pole

I've build a clamp to hold my weather sensor shield at an antenna pole (43mm). This time I used wood screws / Spax to tight the clamp together. I'm not really satisfied with that try, but you can use countersunk head screws, that's better.

Pobrania
51
Polubienia
2
Ocena
0
P
PrintablesCrumbleBee

Watch Charger Stand for 43mm Garmin Fenix 8

Remixed model meant for use with Fenix 8 in smaller size. Probably works with the new Forerunners and larger Fenix 8s

Pobrania
48
Polubienia
6
Ocena
0
P
PrintablesNKTechnical

43mm Hood for W-Nikkor 3.5cm f/2.5 and f/3.5 Nikon Rangefinder Lens

This is a lens hood for the following Nikon Rangefinder lenses: W-Nikkor 3.5cm f/2.5 (first and second versions) W-Nikkor 3.5cm f/3.5 (second and third versions) The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era.…

Pobrania
47
Polubienia
5
Ocena
0
P
Printablesjszewczyk

Pen holder for CNC (43mm spindle)

Pen holder for CNC to mount pen/pencil instead of 43mm spindle.

Pobrania
46
Polubienia
3
Ocena
0
P
Printablesroboxido

Square Lens Hood 43mm

Square lens hodd with a 43mm filter size. With cutout for Rangefinder visibility. Lens Cover best printed with flexible filament Fits Color Scopar 35mm 2.5

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesJBoe

Handle with depth stop for 43mm standard connection

Object Description: This is a handle for an electric drill machine, drill hammer, etc. with a 43mm diameter standard connection. By turning the grip the handle will be clamped to the drill machine and the stopper will be clamped in…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesEwert Snyman

Drill Bracket for Standard 43mm Drill Housing Shoulder

This is a simple drill bracket or clamp to hold a drill with a 43mm housing shoulder. A 70mm M3 bolt and nut is required for the clamp and another set of bolts and nuts can be used to bolt the bracket to a table top or any other suitable…

Pobrania
43
Polubienia
9
Ocena
0
P
Printablesneotoy

Mini Solar Panel Mount (56x43mm)

Beveled edges provide for a nice fully exposed surface that is difficult for roving miscreants to remove and deflects water/wind. Internal standoffs support the panel at its optimal height. Side notch allows for easy wiring. Watch the…

Pobrania
39
Polubienia
6
Ocena
0
P
PrintablesFroznBits

Soldering Iron Press 43mm Collet/Collar/Bushing

Bushing adaptor to hold a soldering iron in a press to use for heat inserts. 43mm outside diameter. The inside diameter is 18.6mm at the bottom and the top is 17mm. I designed from scratch but based on similar designs found on Makerworld…

Pobrania
39
Polubienia
7
Ocena
0
P
PrintablesSuperWilli

43mm Lens Filter Rugged Box

Everything is printable without supports. You will need 3x M3x30mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction to maybe 1.2mm or just use…

Pobrania
38
Polubienia
21
Ocena
0
P
Printableskkrk

Prensa cafe 43mm

Diseñe e hice este utensilio para prensar el café en la cazoleta de mi cafetera, la cual es de 43mm. Se puede re escalar el diámetro al que mas os convenga. Recomiendo poner 4 perímetros y 30 % de relleno.

Pobrania
38
Polubienia
4
Ocena
5
P
PrintablesfknCobra

Filament spool rod (43mm) hanger

Filament spool rod hanger (remix from Robinder's spool rod hanger https://www.thingiverse.com/thing:3676334 ) The hanger is designed for OD=43mm pvc tube to be used with button head screws. Hardware required: m4 x12mm button head screws…

Pobrania
37
Polubienia
3
Ocena
5
P
Printablesdragon0504

Canon EFM 22mm f2 lens 43mm thread filter case (49.1mm X 10.1mm)

This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside…

Pobrania
37
Polubienia
6
Ocena
0
P
PrintablesBoris Böhlen

Rack for spice jar (43mm, e.g., Ostmann)

Simple holder for spice tin can mount under the shelf or on the door. Fits for all spice tins with a diameter of 43mm (e.g., Ostmann). Alternative version: Rack for spice jar (40mm, e.g., Hartkorn) Onshape model for remixing:…

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesAlextrical

43mm waste pipe debris cap

End cap to fit over a 43mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…

Pobrania
36
Polubienia
1
Ocena
0
P
Printableslemark

Canon Adapter 43mm to RMS

Adapter from from Raynoxback 43mm to RMS 08"x1_36mm

Pobrania
36
Polubienia
2
Ocena
0
P
PrintablesSarge324

IKEA Elloven Bamboo 243mm pen insert

Designed for organizing writing utensils in Elloven's longer compartment. Fits any standard hexagonal pencil and any standard pen. Designed at half height for 33mm tall Ellowen drawer so you can print 2 of them and stack them on top.…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesVasyl Kutsyk

52mm spindle holder clamp to 43mm adaptor for genmitsu 3020 pro v2

Spindle holder insert for Genmitsu 3020 PRO v2 CNC machine. Designed it to hold laser that was smaller than spindle diameter. This adaptor is compatible for 43mm and smaller. Wall size is 3.5mm.

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesCartridge_Man
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
35
Polubienia
5
Ocena
0
P
PrintablesHenry

Camera Lense Filter Adapter 43mm (Lense) to 58mm (Filter)

Print with auto supports for overhang of 90 degrees. IMPORTANT set the XY separation between object and support to 250% - this is needed because the outer threads on the model are a separate object, and otherwise the support will overlap…

Pobrania
35
Polubienia
2
Ocena
0
P
Printablesmasterviana

Delta carriage 43mm plus carriage 55mm (AKLP)

Remix of delta carriages for 43mm rod lengts for using on my anycubic linear plus delta and a 52mm rod distance to my big delta build. With a nice and easy belt tensin system. Remix of : https://www.thingiverse.com/thing:3054385 I'm sure…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesCeptoRider

Vacuum Hose Holder 43mm

Wall mount Vacuum Hose Holder for 43mm vacuum line. Please Rate and share your Make 😎

Pobrania
35
Polubienia
11
Ocena
0
P
PrintablesJensen33

Dust shoe Ratrig Killerbee 43mm spindle

This is a remix of the “Dust shoe Ratrig Killerbee 43mm spindle, 36mm and 50mm hose” by “DutchWoodworker”. I used this the original dustshoe by DutchWoodworker since I got my KillerBee about a year ago and it have been great. There are…

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesFFtachanka

Screw Cap for 43mm Tube

Screw-cap, suitable for gluing onto a 43 mm tube.

Pobrania
32
Polubienia
0
Ocena
0
P
Printablesblechbude

Filterdose 43mm Filter Filterbox Fotofilterbox photographic filter box

Dose zum schrauben für Fotofilter mit 43 mm Durchmesser. Die Dose hat innen einen Durchmesser von 48 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesCartridge_Man
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesPeter Hirt

CNC suction unit for 43mm mount

Suction unit for e.g. Maffel spindle. Required are M4 screws 10mm M4 nut M6 nut Magnets 4x1mm

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesTurbopstros

Reinforced Balcony Door Handle (43mm and 48mm Holes Spacing)

The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…

Pobrania
29
Polubienia
6
Ocena
0
P
PrintablesSJ-Prints

Gravel Bike Stand 41-43mm - 280 x 265 mm buildplate

Edited to allow the leg to be printed in two parts to fit onto the build plate, removes the requirement to glue the pieces together.

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesKlave

Pegboard holder for Stepcraft 43mm spindle mount accessories

A holder for devices that fit into the Stepcraft 43mm diameter spindle clamp. Fits 1/4" pegboard holes spaced 1" apart Initially I thought it would be for my HF-500 spindle but its a bit heavy and the cable is quite thick. Up on a…

Pobrania
29
Polubienia
2
Ocena
0
P
Printablestcatca

43mm Drill Press

this is a drill press that works with standard drill. I drill a concrete floor ( interjoist), 40mm https://www.thingiverse.com/thing:5502241 or less than 30€ you can have a drill press for concrete floor. A video when drilling the…

Pobrania
29
Polubienia
4
Ocena
0

Laser Air Nozzle 43mm Spindle Adapter

Originally designed to work with Opt Lasers cutting and engraving laser heads, the following file spawns a Laser Air Nozzle that can enable you to produce higher quality items during a laser cutting or engraving procedure. The nozzle…

Pobrania
29
Polubienia
0
Ocena
0
P
PrintablesCartridge_Man
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
27
Polubienia
1
Ocena
0
P
Printableshlucid

PICO Neo 3 Lens Adapter (43mm)

This adapter fits the Pico Neo 3 Link VR headset. I created this adapter to make use of the lenses I had for my oculus cv1 adapter. The lenses were bough with a frame for only $20 from zennioptical.com (Item SKU 550021) but you can…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesAnson Liu

IKEA KNOPPÄNG 16"x20" (43mmx53mm) Frame Stand

Print the topo maps in the sample picture here .

Pobrania
27
Polubienia
7
Ocena
0
P
Printablesavionix

43mm Fork Seal Driver

Fork oil seal driver for a Honda CBR929RR. Fits 43x54mm fork seals. Suitable for inverted forks. All parts are 3D printable. Features a large flange to press or hammer on and a top collar to protect the stanchion from accidental blows.…

Pobrania
26
Polubienia
4
Ocena
0
P
Printables3D-Druckbude

Halterung Schleppmesser / Drag knife holder Ø 65mm + Ø 43mm

Hallo zusammen, ich habe eine Schleppmesserhalterung mit einer 43 mm Aufnahme geschenkt bekommen. An meiner CNC betreibe ich aber eine Makita mit einem Spindeldurchmesser von 65mm. Also habe ich einen Halter hierfür konstruiert. Ihr…

Pobrania
26
Polubienia
1
Ocena
0
P
Printables3dprints4life

Dividers for Organizer / Fishing Box small (43mm) and large (89mm) Zite

Dividers for a Organizer / Fishing Box from Zite Fishing (Finesse Drop Shot Set) If you like my model(s) please leave me a like to support my work. Thank you!

Pobrania
26
Polubienia
20
Ocena
0
P
PrintablesMakingThingsCLT

43mm Clip Doorstop

I had been meaning to make something like this for a while and then Taekyeom Lee posted this and pushed me over the edge. https://www.instagram.com/reel/CZp54BjpP_Y/?utm_source=ig_web_copy_link It aint fancy, but it gets the job done.…

Pobrania
25
Polubienia
1
Ocena
0
P
Printableskleenecks

Low Profile 39mm to 43mm Step Up Ring

39mm to 43mm step up ring/adapter with finger tabs for leverage Print with .08mm layer height or lower. Recommended supports in this orientation: For support settings I like to use 3 top interface layers, .22mm Z distance, 0mm top…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesOyo Oyo

Support thermomètre 43x43mm

Prévoir vis M5 ou M6 longueur 20mm avec écrou. You need 1 screw M5 or M6 lenght 20mm with a nut.

Pobrania
25
Polubienia
6
Ocena
0
P
PrintablesLittleSwede

43mm Jar Lid (Scalable)

43mm Diameter jar lid with open top for ventilation. Scalable for different size jars.

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesLittleSwede

43mm Jar Lid (Scalable)

Closed jar lid (Scalable)

Pobrania
23
Polubienia
1
Ocena
0

Dusthood for 43mm sorotec spindle holder

It takes 2 80mm hoses for maximum dust extraction with a high volume dust extraction like a Felder AF160. Its mounted to the spindle holder of Sorotec and fits nicely on the Sorotec Basic Line Z Axis. The dusthood is printed in 4 parts,…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesTek

Shorter version to prevent collision issues (43mm base instead of 47mm)

Shorter version, 43mm to fix collision issues. No z-resize, it was cut and 4mm were removed. K1 max has 45mm distance between the nozzle tip and lower rod (see slicer config for your printer). The original model is 47mm. This means when…

Pobrania
22
Polubienia
2
Ocena
5
P
Printablesneddi0

Brake Bleed Adapter - Bremsenentlüftungsadapter -- Skoda Fabia 5J ( 43mm )

Keine Haftung Benutzung auf eiegene Gefahr ! Disclaimer Use at your own risk! ZUVIEL DRUCK KANN DIE BREMSANLAGE SCHÄDIGEN ! TOO MUCH PRESSURE MAY DAMAGE THE BRAKING SYSTEM! Teilenummer des Original Deckels " 6N1611349B " ( Skoda Fabia 5J…

Pobrania
21
Polubienia
7
Ocena
0
P
PrintablesSB

Gewürzregal für Gläser bis ca. 43mm Seitenlänge.

Gewürzregal für Gläser bis ca. 43mm Seitenlänge. Gedruckt wird ohne Stützen mit 0,2mm, Düse 0,4mm HAPPY.PRINT

Pobrania
20
Polubienia
3
Ocena
0
P
PrintablesTomáš Kaleta

reduction 58-43mm

reduction for vacuum cleaner

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesKenneth Tan

Spice rack for 43mm spice bottles with placeholder/slider

Spice rack for 12 bottles. (43mm max) With a slider/guide for in the cupboard. You can screw the guide with 2 3mm screws to the cupboard.

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesBucksDanny

Jack stand adapter V-slot design 14-21mm width 43mm

A jack stand adapter to prevent damage on your car supports, personally used on European cars from VW/Opel/Peugeot/Citroen/Toyota. V-slot design 14-21mm width 43mm.

Pobrania
20
Polubienia
0
Ocena
0
P
Printables4noxx

LowRider2 euro neck mount 43mm

Eurohalsaufnahme / euro neck mount 43mm 90mm x 90mm x 26mm support: no vacuum cleaner connection support: yes optional: 4x M3 inserts 36mm (outside), 30mm (inside) 38mm (outside), 32mm (inside) 40mm (outside), 34mm (inside) 42mm…

Pobrania
19
Polubienia
2
Ocena
0