Liczymy pasujące modele…
June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…
The stand for the switch and display Fritz!DECT 440 by avm is shown in photo No. 1. Simply place the display on the stand and you are done! The display resting on the stand is shown in photo No. 2. The stand may optionally be used with…
Wall mount case for FRITZ!DECT 440 switch. I wanted to have a secondary place for my switch (in addition to the original magnetic-mounting). References Product page of the switch https://avm.de/produkte/smart-home/fritzdect-440/ (in…
This stand for the FRITZ!SmartControl 440 allows you to place your sensor close to where you are, providing temperature readings and thus optimized room temperature control with FRITZ! thermostats. The stand uses the same 50° angle than…
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
A modest desk stand for a Wacom Intuos 4 (model PTK-440) pen tablet. It allows you to store the tablet in a vertical position, saving desk space and making it less likely to collect dust (or cat hairs 😀) The file size is rather large,…
just print it like every normal print just a bit slower/einfach wie jeden normalen Druck drucken aber vielleicht mit etwas weniger geschwindigkeit
Modified the original design to accomodate the upper 2 screw holes, making it more sturdy. 299 174 10.07 Category: R/C Vehicles
Universal (fits both L&R sides) front and rear swingarms for 144001 as well as new from the ground up front steering hub. Each part is tested to fit, installed on at least 1 car and driven for at least 1 full battery charge. Recommended…
An offshoot of my project https://www.thingiverse.com/thing:4606971 RC Pump Jet boat, I modeled a stand alone water jet originally intending boat to be modular in design. After consideration I decided to just integrate the pump jet with…
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them UPDATE - Feb 24, 2021 Uploaded a V2 version with more…
Here I have a pretty basic model for inserting another HDD into the HP Z440 Workstation's drive bay. Unlike the default caddy, this one is friction fit as well as requires four drive screws instead of being toolless. Here is my tinkercad…
My friend needed extra HDD/SSD trays, as his (bought used) NZXT H440 computer case only came with one. So, I measured the original and made this to fit the tray slots in the case. Fits both 2.5" and 3.5" disks. It's available in three…
Probably compatible with other Thinkpads
A₄ is the musical pitch corresponding to an audio frequency of 440 Hz , which serves as a tuning standard for the musical note of A above middle C, or A₄ in scientific pitch notation. It is standardized by the International Organization…
für das Fritz!Dect 440 Modul. Einfach Reinstecken, hinstellen und fertig... Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Yes Supports: Yes Resolution: Infill: 20% Filament: Sunlu PLA+ weiss Custom Section no Category:…
This is a replacement cap for Dell Latitude E7440 stick pointer.
Designed this to be simple and easy to print. The one in the photo is printed in TPU, as I figured it would withstand crashes a bit better. However, at this thickness it is a bit floppy.
Wltoys 144001 front and rear shock cover / Protector. Added front and back covers for upgrade towers (sold on AliExpress). Screwed from behind. thx, front protector remix from https://www.thingiverse.com/thing:4602685 Print Settings…
The STL is only for the right side. You need to mirror it in X direction to get the left side too. You only need two M3x8mm screws. printed in ASA weight is ~3,2g
This model is compatible with the lego system.
Update 2: after some track time using the drift tires, I would change the spokes to be on the inside of the rim or in the sidewall as of now they take significant amount the tread. And maybe add some heat set threaded inserts for the rims…
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured…
I loved my old aiwa Minidisc Player and I wanted to keep it functional. The original LIB-902 LiIon battery had leaked and was dead anyway. So I discovered that already some adapter from the 10440 cells are available. But I wanted them to…
Stepper Motori. Serie 17HS2408 - 17HS3401 - 17HS4401 - 17HS8401 - 17HS6401. Creati con solidworks con passaggio semplificato*. per le misure complete consultare il file in allegato Step motor_datasheet.jepg Sono inclusi file solidworks…
Ram cooler with support for the Z440 stock ram fans. -Printed with PLA+ at 50% infill(a few extra grams compared to 10% so that's your call, I just wanted guaranteed stiffness) -Several revisions later and it's a tight fit with better…
Wltoys 144001 front and rear shock tower 3mm. SVG files added for cnc. Category: R/C Vehicles
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the…
Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…
A wall mount for Wltoys 144001 RC buggy. There are 4 screw holes (4mm diameter, countersunk) to mount it to the wall. It holds the buggy by the rear swing arms. Category: R/C Vehicles
This is a 3d model of the hinge cover on my SRH440 headphones, which was completely broken after a rough trip. alternative keyword: srh-440
parts that you cant buy separately, but breakes often, reinforced design for FDM printing, print solid
This is a replacement 3D model I created for a friend for his WLTOYS RC car for the front knuckle. This uses the stock dimensions and has enough clearance to make the steering arm thicker if needed. Recommend printing it vertically…
ERTL makes a die cast model of this late 1950's crawler in two versions – with and without a dozer blade. They do not offer a version with the bucket loader. With a little determination and a few extra pieces of hardware, an ERTL model…
This is a meticulously crafted 3D model stand, specifically designed to securely hold the Dell Latitude 5440 in an upright, vertical position. It is engineered with precision using minimalistic yet durable materials to ensure stability…
For use on sand (beaches). Might not work so well on other terrain. The bigger diameter (~90mm) gives more room for speed and should work better with bumps. The hexagonal hole is a tight fit depending on your printer tuning. Front wheel…
These are a replacement door bins for LG LSC27925, LSC27937ST fridges, replacing LG part 241H / MAN61844401 / AAP72911202. I printed this on my Sovol SV06 and it took up nearly the entire 220mm x 220mm print bed, so I think you'll need a…
Remixed from the awesome fidget by Thorin Oakenshield. We added Team 4405 Atom's Family logo and team number to frame. The gear is the same as source model.
Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case. Since the case is pretty compact I had to make some compromises. Also, It is possible it will not fit for you if you have, for example, a…
This is a printed adapter case for a USB-C trigger / power module that will give out 20V for the laptop. See more here:
A GoPro Mount Fit on Wltoys XKS 144001
This is a remix of this model with added ventilation holes for increased airflow. I use it with my HP z440 but it likely could fit similar models like the Z240. https://www.thingiverse.com/thing:4783713 My Tinkercad model:…
Didn't secure the cover when folded and it flipped open and broke the hinge. These are replacements for the smaller rear hinge. I printed one flat with no supports and one vertical which required one small support. Put one on each side,…
So if you own the Tormach PCNC 440 and the TTS passive probe, you know it's kind of a pain to hookup/disconnect between uses. Since it plugs in you have a cord from the back right of the enclosure to your probe making it very awkward to…
Opony polecam drukować z TPU, świetnie się do tego nadaje. Resztę wydrukowałem z PLA. Przy druku z TPU lepiej wyłączyć retrakcję i jeżeli posiadasz drukarkę z ekstruderem bowden zmniejszyć prędkość drukowania do około 30mm/s.
Wltoys 144001 top deck 2mm and spur cover. added: 3mm, 4mm and 5mm thickness. SVG files added for cnc. Category: R/C Vehicles
This is an io shield for the Z440 motherboard. This is required if you recase your Z440 like I did. To get this to fit properly in my case i had to use some side cutter wire snips to trim the tabs slightly but it's otherwise a very nice…
I needed a bigger bumper cause my kids keep breaking parts.
History behind making the part I have a friends that ask me is i could help him with his vinyl player, had a broken gear and is a model from 1987. Good luck finding spare parts for that. 3D Printing to the rescue. i took it apart and…
Introducing the ultimate beer mug for Hell Divers 2 fans and beer enthusiasts! This meticulously designed 3D printed beer mug is the perfect companion for your 440ml cans, ensuring your drink is always ready to pour. Key Features: Optimal…
I uploaded this little fellow as my contribution to the 1440 Makers charity event (the event was a real success - well done Makers and especially the organizers who had no sleep for well over 24 hours!) To quote: "1440Makers came about at…
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
This is modified from the original with the following changes. Hole added to the side to mate with the pin of the screwless slim DVD bay of the Z440 case. PCB space modified to hold the PCB from a different brand of thicker 14mm adapter.…
(English below) Dies ist eine Batterieabdeckung für eine Banner Power Bull P4409 Batterie, benutzt im Ford Fiesta meiner Schwiegereltern. Die mitgelieferte Abdeckung passte nicht über die Batterieklemmen. Druckeinstellungen Material: Am…
Simple Skid plate for WLtoys 144010 - 144001 RC buggy 1/14. Use 4 M2.5x12mm screw. Print in Petg but PLA will work too. Made with Tinkercad.
Einsätze für den "normalen" Sortiment Koffer, in jedem Baumarkt zu kaufen, der Größe 445 x 340 x 70 mm Außenabmessung. Oft bräuchte man längere oder breitere Einsätze die man nicht zu kaufen bekommt. Es wurden 14 neue Größen gezeichnet.…
You can buy these from me here! Consider supporting us on Patreon! These AAA/10440 battery holders with a screw lid are incredibly tough and rigid! Designed for use with protected, unprotected, button-top, and flat-top cells. Print the…
This thing allows you to hook up a Ryobi P440 1/4 Sheet Sander to a shop vac with a 1.25 inch (31.5mm) hose. The documentation says that Ryobi sells a vacuum adapter separately. After spending several minutes trying to find where I could…
I got annoyed seeing empty spaces for screws with atx trays. -May need a pair of pliers or 4mm socket to tighten standoffs. As long as you aren't going too hard, the standoffs will stop once snug. -The opening is more than enough to clear…
A spare part for my friend's Kawasaki JS550 that fits the original lid, tube, and chain. Compared to the original part, this one has a slightly angled tube to make the fuel hose bend to be less extreme, at the request of my friend. As…
This model is compatible with the lego system.
Shock mounting screw brace with shock guards. This design ties into the alternative shock mounting holes for more support. It is designed to be tapped to M3x0.5mm so the screws fasten directly to it, it does not use nuts. Reuses stock…
Adapter to connect a Karcher WD6 vacuum to the Stanley FATMAX FME440 orbital sander.
Antriebsrad für einen Kobold PB440. Bei unserem Kobold PB440 (Polsterboy) war das Zahnrad welches die rotierenden Bürsten antreibt abgenutzt und ist nur noch durchgerutscht. Da ich es nicht als Ersatzteil gefunden habe, habe ich es…
To Celebrate the success of the latest event, Show your alliance with the 1440Makers with this Cuff. Can be printed on FDM and Resin, Though the fine detail will benefit the coin (which can be printed separately) Congratulations 1440Makers
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Just a simple replacement bracket for the NZXT H440 case. I saw that someone was needing one over on Reddit/hardwareswap and I have an H440 readily available so I figured it would be great practice modeling plus it is always nice to add…
This allows for mounting of the Z440's memory fans directly above the ram in a case agnostic way. I printed this in PETG.
So a friend of mine created this bust for my birthday and sent it to me and it floored me with the amount of detail and even put me in a 1440 Makers shirt. We decided to share this model, BUT the artist would like to be anonymous.. So I…
This is a cap for the Ryobi RP4400 Flashlight. My Father lost his cap for this flashlight and we didn't feel like spending 10 dollars buying a used cap online, So I 3D designed this one, its a very basic design, allowing it to be quickly…
Thank you for viewing this model. If you download this or print it, you are required to send me a tip via Monero (any amount) and leave a nice comment. My open alias ID is: edison.me Or you can send to the address at…
loose ground coffee cover for philips coffee machines For models 1200/2200/3200 For me only like a case. I don't use the hatch opening printed on creality ender 3 v2 neo printer material petg filling 20%
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
Ersatzteil / Spare Part für einen Akku-Rasenmäher der Firma Worx / Pattfield Original Kunststoff PA66 - GF50 Nur hochfeste Kunststoffe zum Drucken verwenden; solider Druck.
Picatinny and scope holder Picattiny tight use little power! no screws Scope holder M4x10 shcs 4 pcs Mřx 30 shcs 4 pcs
A solution for the lack of a fingertip spinner on the VFO knob on the Kenwood. Beveled hole for comfortable use. Simply glue onto the front of the knob. Category: Electronics
Unfortunately, my Inter-Tech 4U-4408 server case does not have a 5.25 bay. So i made this mount to insert a 2x5,25" Icy Dock ToughArmor MB508SP-B. It fits into 2x 5.25” drive bays and you have to cut a hole into the frontplate of your…
LOWER SPRING HOLDER FOR WLTOYS 144001 Category: R/C Vehicles
DDD Wall Control tool holders for PB Swiss SwissGrip drivers. Rainbow Slotted Screwdriver Set PB 8240.RB Slotted Screwdriver Set PB 8240 Rainbow Phillips Screwdriver Set PB 8242.RB Phillips Screwdriver Set PB 8242 Torx Screwdriver Set PB…
This is a 3D printable replacement Stopfer (pusher/plunger) designed specifically for the Bosch MUM 4405 food processor. If your original pusher is lost or damaged, this model provides a functional and snug-fitting alternative to keep…
This model requires one unit of rack space (1U) and supports attachment through screw fixation. Simply select screws of your choice and secure them as illustrated in the provided photographs. For optimal printing results, orient the front…
“When you have a hammer, everything looks like a nail” – Abraham Maslow's Law of the Instrument Phone holder accessory for the front end loader conversion of the ERTL die cast model – Turn that 1950's crawler loader into an integrated…
I got the knife blank from aliexpress.com M3 nuts and screws The handles are a litle bit bigger than the knife so you can sand and polish them afterwards.…
This is the Prusa XL series: Front Antivibration/support 3030 PETG extrusion by Surfalex2000 with Prusa XL graphics added to the Front of the support (prints on the TOP, installs towards front). I had already resized it by 100.41% for…
I made a hook that holds my headphones that clips on the front face plate of the NZXT H440 Print instructions Category: Audio Summary I made a hook that holds my headphones that clips on the front face plate of the NZXT H440
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case. Since the case is pretty compact I had to make some compromises. Also, It is possible it will not fit for you if you have, for example, a…
Stand for the included wall mount of the DECT440. Simply attach this to the stand with two M3 screws and nuts. The DECT440 can then be placed anywhere
This model is compatible with the lego system.
Redukcia na nasunutie klapky ( https://www.igm.sk/igm-hradidlo-s-alu-priehradkou-pre-hadicu-100mm/?tab=1 ) Print instructions Material: PETG
a rack for the VP2440. I did not see anyone else design one yet so I made it. It is my first 3d model with fusion so will be updating it as feedback is received. Designed so that the protectli sits at the top of a DeskPi Rack. At the top…
