1090 modeli
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Hey there :) Step 1: Load the files into the slicer Or you use the prepared gcode, just look at the requirements Step 2: Correct the orientation of the models: The FRAME is printed with the Logo facing down and the bridging should be from…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
49mm lens cap with flaps for easy screw and unscrew.
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm. A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
A tool rack to hold the Wiha 26491 5-Piece Ball Metric End Hex Driver Set. Meant to be affixed to the front of a 19mm or 3/4" shelf with 2 drywall screws. Print instructions .2mm layer height, 20% infill, PETG or whatever should be fine.…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[Update March 26, 2020 - see note below] This was made for my build of the [clough42] Electronic Lead Screw project. Use with #4 x 3/8 sheet metal screws (#4 ~= 3mm). This is a simple frame to hold the TI-LaunchXL-F280049C for use on the…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My [Samsung 49 inch Odyssey 0.03 ms 240 Hz OLED G9 Gaming Monitor (LS49CG932SNXZA)] JOG button / joystick crapped on me . It seems to be a common issue[…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
parts for : Ultegra shimano 10000 - line safety guard Part Number : RD15149
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
A simple collar for the Behringer DCX2496 Power Button. The collar prevents accidental button press and it also acts as a guide for the button. The part is designed to replace the original collar (if broken etc.) and it is meant to be…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
The tail light covers on our compact tractor kept falling out during use and getting lost. The only info I could get was the printed “IMASEN 1121-491” on the one remaining official cover. I found nothing online except a thumbnail of an…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can place the 4 pieces into the frame in two different ways. In one case, they leave a triangular hole. In the other, they fill the frame… Could you explain what's happening? This geometric paradox is based on the rational…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
This is a variable height fridge door schelve adapter that I designed for my Siemens KG49E4ICA fridge, but I guess this can be used with other Siemens fridges as well. I designed this because the predefined schelve mount positions were…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation [ I need a curved steel girder bridge element for Märklin curved rail No. 24912 ... ] After providing several elements for the modular bridge system, I was asked by a model railway enthusiast to consider a suitable part for the…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Print Setting PETG 0.3mm draft
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description This is a custom-designed, 3D-printable replacement pusher pad/plate for industrial bottling conveyor systems. It was modeled from scratch to serve as a functional alternative to the rigid stock stainless steel pusher pad (…
Wydruk około 6,03 €–7,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple adapter for the Dewalt DXCVXA06B battery powered vacuum to the Milwaukee 49-90-1996 antistatic hose. I made this because the hose that comes with the Dewalt vac generates a lot of static. The Milwaukee hose, straight…
Wydruk około 4,54 €–5,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Practical battery storage trays to keep your drawers clean and organized. No more loose batteries rolling around! 🟧 AA Version: Holds up to 36 batteries (approx. 104 x 94 x 23 mm) 🟧 AAA Version: Holds up to 49 batteries (approx. 93 x 80 x…
A 49mm lens cap that I made. Works great with my Sony lenses. Be careful to use this lenscap with too rounded lenses as the backside of this lens cap is flat for easier printing. I made a lite version, see "49mm_lenscap_V3_lite.stl" which…
Design Concept The Bit Organizer is designed with a compact and efficient layout featuring honeycomb slots to secure up to 149 bits securely in place. Function It is intended to keep your various bits organized and easily accessible in…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
San Francisco 49ers 1st Layer Black 2nd Red 3rd Gold 4th White 5th Black
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
This model is compatible with the lego system.
There are plenty of M49A2 rounds available but they are all incorrect in one way or another, I have done my best to make a round that is correct in size and detail to a real M49A2, I have designed this to be printed as a sold round, with…
Model of Columbus caravel Niña - created from plans for wooden model from Amati and optimized for 3d printing. Contains 103 different parts (I see 24 is missing :-)), total number of printed parts may be above 300 (zipped and uploaded in…
How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
This model is compatible with the lego system.
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
This model is compatible with the lego system.
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
A lens hood for your 50mm lens (filter diameter 49mm). No thread - just push on. Use the Fuzzy Skin option in PrusaSlicer if you wish. No support required. Paint the interior matte black. Do you like it? Please consider to buy me a cup…
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
A Logo Stand from Sanfrancisco 49ers
Cut out some of the material and still dont have to use supports if you lay it down, also made a 249.5mm version Print instructions Category: Tool Holders & Boxes Summary Cut out some of the material and still dont have to use supports if…
Beautiful pencil vase for decorative purposes to hold pens and pencils, or anything else. It is 112mm tall and 85mm wide. Print time approximately 2 hours 30 min. with a single wall at print speed of 50mm/s. The photo shows the vase…
pencil holder with 49ers logo. print at 275% or more for decent size
Link zum OSVac System: https://ossso.de/osvac/ Adapter für die Tischkreissäge DeWalt DWE 7492 um diese mit dem OSVac System zu verbinden. An dem Adapter wird auch gleich die Absaugung für die obere Abdeckung angeschlossen. Druckdaten:…
Marginally adapted the Featherboard. Created a new miter runner which is optimized for DeWalt 7492, based on my other design, using M5 nuts. Used my standard M5 star knob Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
This model is compatible with the lego system.
This model is compatible with the lego system.
SCP 049. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This model is compatible with the lego system.
Not wearable . Sculptural rendition of SCP-049’s plague doctor face as a mask. Detailed scratches and texture to mimic the chitinous material of the SCP’s face. Best for high resolution printers.
Dübel d8-D10x49 8Stück Ich empfehle PETG und 100% Füllgrad. Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten. Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise…
Print with supports, you may have to print a couple times to get it to the right size, and you will need something to hold the holder in place you should use something sticky to sick it to a wall.
This model is compatible with the lego system.
Just another Zero Clearance that fit for Dewalt 7492 with stock equipement. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** Amazon BasicFil PLA…
This much more precise miter gauge helps to avoid the play between the groove and the standard miter. Depending on your print settings, you might want to print a section first to check the fit in the groove. it requires 2x M5 and 1x M6…
ORGANIZER GT496 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Simple adapter to attach a shop vac to a dewalt 7491 table saw (probably works with other saws?). Designed in Tinkercad. One of these years I'll make one in Fusion.
DEWALT table saw that is nearly 1:1 ratio to the actual DWE7492. I created this model for designing a workbench in my workshop.
This model is compatible with the lego system.
This model is compatible with the lego system.
Hey guys i'd like to share my recent bigger project with you, my 10 inch Network Rack. I was always disappointed when i saw all the mess and not really organized cabling and setup of my network devices at home. Inspired by another 10inch…
This model is compatible with the lego system.
This model is compatible with the lego system.
Updated on 11/12/2018 WIP stands made by danielgeez that look realy nice to display this model. (Thanks Daniel!) https://www.thingiverse.com/thing:3272738 Updated on 13/11/2018 - Faulty Part FIXED "Spring System" part now fixed. Guide…
Square lens hood for Helios 44-2 (or other Lenses with 49mm thread) !!! I've tested the Vignetting on an APS-C camera not sure if it works on FF !!! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: Yes Resolution: 0.2…
This model is compatible with the lego system.
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is an adapter to fit a crane stock on an airsoft M249 Compatibility: tested to fit on my Classic Army M249, which should mean that it will fit the A&K M249 as well. According to the comments, this is also confirmed to fit on a G&P…
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** For those handy and forunate enough to have ample…
This 3D printable Power Brick Holder has been meticulously designed to enhance your gaming and workspace experience with the Samsung Odyssey G9 - 49" monitor. No more tangled cables or unsightly power bricks cluttering your desk; this…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a positioner for the IWISS SN-2549 crimp tool for Molex SL contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut. Replace the existing screw with the new screw while the jaws are closed to…
This model is compatible with the lego system.
There are two files available in this model for the base. One has airflow gaps on the sides and under which will require supports; the other is a solid box and requires no supports. I just didn't like how the solid box sat on my hard…
Here is the awesome looking San Francisco 49ers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Awesome model of an old classic. Comment below if you want to see more models like this!
A simple filter to adapt 49mm lens filter to 52mm lenses. Threads are 49x0.75 and 52x0.75. Avoid tightening the filters too much, it might be difficult to remove after (remove the 49mm filter first). Print at 0.1mm layer height for best…
A short rail adapter that replaces the stock bipod on an airsoft M249. Mount your own bipod, foregrip or flashlight
This model is compatible with the lego system.
Printable without supports.
The lego technic part "49137" ready for printing if you need it
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external. The links have an integral support that will need to be snapped off and thrown away after printing. The standard link cap somewhat restricts the internal space when in the…
This model is compatible with the lego system.
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. I did not include the model for the ears - use a felt…
![Märklin H0 modular Steel Girder Bridge element for curved Rail-C No. 24912 [R=1114.6mm-12.1°] (multi part) / Märklin H0 modulare Stahlträger-Brücke Element für gebogenes Gleis-C Nr. 24912 [R=1114.6mm-12.1°] (mehrteilig)](https://media.printables.com/media/prints/620e3817-933c-4f89-b0f3-12501adb3298/images/13150858_9076cefc-5cda-4c33-b51b-6ffdada61a27_cff0d68a-3608-4e99-9ab0-aeb8a86617fb/g_title.jpg)
