Liczymy pasujące modele…
UPDATE3: Uploaded STEP files and F360 files. UPDATE2: Updated model that uses a standard 4-hole punch (80mm between all holes) UPDATE: I have created a model that fits the original Prusa hole pattern (60 mm between the middle holes and…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
The “notched” version allows routing cables below the device, otherwise they need to go around the sides. Use a skirt to keep the (at first) separated pieces in place while printing. The version “with USB stick holder” has three slots for…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
I created the inverter/sound directional adapters (not really sure what to call it) to improve the sound quality when having my HP P34hc G4 monitor standing in an open area without a wall behind. Can be attached with glue our double-sided…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
This model is compatible with the lego system.
I'm designing all my models with sketch up - so I'm not the best 3d designer 🥲 You have to print the part once as it is and once mirrored. I used PETG and it holds up perfect for 2 years now! the flaps could be bigger, but then I wouldn't…
Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
This is a Eurorack case that I designed with Noe Ruiz. It's a 6U 84HP case. All files are provided so that you can build your own or modify. Panels can either be cut out of wood, acrylic or 3D printed. Other processes have not been…
Congratulations on your sobriety milestones—24 hours, 7 days, and 30 days are significant achievements. Sharing your journey by creating and releasing sobriety chip designs on platforms like Thingiverse and Printables is a commendable way…
A device with a dedicated PCB with an ESP8266 chip can be connected by any smart system. Because it is a food-related device, it would be appropriate to wash it once in a while. You can separate the electronic part from the “food” part in…
I have not seen a simple drip mount that I can leave inside the printer to drip at a tilted angle, handling a big volume. It is all free to download and modify. Try to print with tough resin with less cure time. It needs to bend to snap…
Changement de couleur sur le modèle à 100%: 1ère couleur (Fond) : 0 →2.2mm 2ème couleur (Lettrage) : 2.2 → 3.0mm 3ème couleur (Circuit) : 3.0 -→ 4,0mm
Stackable 24HP block of Eurorack that can be expanded to a full case with more copies of itself and standard M3 nuts (square and hexagonal) and bolts.
Description A simple, sturdy keychain that sports the 4H logo. I also included a version of the keychain that has a stem, if you like that one. I used medium sized keyrings as shown in the picture, but you can use any size that fits. Hope…
Ah, the tangled web of the audio interface! We've all been there, wrestling with cables like some sort of octopus in a tech-induced wrestling match. It's a constant battle between a clean workspace and the siren call of sweet, sweet…
A shelf to hold Gridfinity accessories at a 45 degree angle front and back extensions, added so it doesn't fall out
Orion Fan OD4010-24HB01A with tachometer. Frame dimension is accurate since it is a 3D model from manufacturer.
Be sure to leave a make and “like” my design! :D MiniDSP 2x4HD, loved by audio enthusiasts for calibrating many subwoofers or having active crossovers for their HiFi setup. Unfortunately, it's connection layout and light weight make it…
Nozzle attachment for the Shark Vertex vacuum and presumably other models using this specific trapezoidal nozzle shape.
I wanted to print a portable eurorack case that could could be powered via a USB power bank and played on the go, so here's my 38HP travel skiff! I utilized the rotated 4HP 3U for power, multiple, and mute modules. No supports needed, but…
The round base of this model provides most of the stability so I printed mine at around 15% infill as it doesn't need to be particularly solid to work well. The side walls are measured to sit between the rubber feet of the interface so as…
Decided to make something to lift my desktop devices, it actually does add more space to the desktop.. print on side, no supports, there's room for round rubber feet, to keep it from sliding around.. enjoy.. printed 0.3 draft mode (I…
Every door shelf of my Samsung RR34H6245WW Fridge has broken at bottom in few years span. Simply no way that i am going to pay 60e per shelf for replacements every few years. Comes in two parts and 3rd file includes the connection parts…
This specific VTech baby monitor is one of my favorites due to it supported both direct wireless as well as Wi-Fi connectivity between the cameras and the parent unit (with app viewing via Wi-Fi), but I found the parent unit to be very…
Make two of the provided orientation and two mirrored (I mirrored them in the slicer). Printed with PLA on a Prusa CoreOne with 10% 3D Honeycomb infill and .4mm layer height. Created in OnShape:…
A customized MagSafe iPhone mount for Samsung C34H890WGU - CH89 Series, made by a 3D scan and stoneburner's OpenSCAD design. P.S.: It seems there was an export issue with scaling. Cura scaling to 10000% works. For other slicers scale to…
AVID CNC Hiteco 4HP Dust Shoe - Simple to print dust shoe for the AVID Hiteco 4HP Spindle. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I chose to use Magport dust…
This was done quick and dirty as the weird wobbly clip style stand that came with my Lenovo 500 RGB 1080p +IR webcam mount broke during a work video conference and I had to design a replacement to get back online. I cut off the broken…
This is a Triceratops-like dino. I may have gone overboard on scale textures on the this model but it was a lot of fun to sculpt and tinker with. This is a 4-horn variant because the pipeline that I build generates a TON of images and…
Bonjour, je vous partage ma création du circuit mythique sarthois des 24 heures du Mans, incluant la maison blanche et le Bugatti. La taille réelle une fois imprimé fait 80 cm. Imprimé en PLA + esun black inclus Le logo 24 heures du Mans,…
Customized version of http://www.thingiverse.com/thing:1175301 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1175301 Instructions Using the following options: shaft_length = 20.5 retain_placement = 26…
2 story dvr case for the dahua XVR5104HS-I2. i used: 6 m2x4 inserts 6 m2x6 screws
This is a simple 4HP eurorack blank panel. It's for keeping fingers (and loose cables!) away from the sensitive insides of a modular synth.
Spare batteries for 878's often ship without a clip, and the clip is hard to find/expensive. So after 15 mins on Fusion 360 and a few grams of ABS later… Be warned: you'll need a couple of M2,5 screws.
Ferrari 340 MM 24h Le Mans 1953
This is a remake of shiura's Triaxial Numechron Clock , which i did as a school project. Here is the main changes that has been done to the original design: The 12-hour wheel has been replaced with a 24-hour wheel. The numbers on the…
DIY Print Bed Filament Dryer PETG 65C 4hours added G28 W ; home all without mesh bed level to the G code like this G90 ; use absolute coordinates G28 W ; home all without mesh bed level G1 X100 Y200 Z200.0 F720 ; move x-axis to top to…
No supports needed. Just print. Optionally you can secure it with a thick 2-sided tape. Feel free to adjust and modify to suit your needs - i include the flat .svg vector profile for Cintiq 24HD, that can be used as a base for your…
The 1960 24 Hours of Le Mans was the 28th 24 Hours of Le Mans Grand Prix of Endurance, and took place on 25 and 26 June 1960, on Circuit de la Sarthe. The prospect of a duel between the 3-litre (180 cu in) Ferrari versus the 2-litre (120…
Requires for assembly: 8 x DIN 912 m3x20 8 x DIN 562 M3 Screw usage is up to your discretion.
Scuderia Ferrari directly supports this car with chassis number 0320, the only one of the four, present in 1953 at Le Mans, to arrive at the finish line. The two Pilots Paolo and Gianni Marzotto would finish fifth at the distance, having…
My Dell monitor U2414H has a very narrow bezel and the webcam will cover a fraction of a screen - a particularly important fraction with all your browser tabs. So I've designed a "spacer " to solve this problem. There are 3 versions:…
BEHRINGER UMC204HD external sound card vertical support. No support needed.
This is a blank tile for Eurorack, 1U 4Hp
Got a couple projects in the works for my intellijel palette case – this was the first. Dimensions are the same as the metal side-panels.
Das ist meine zwei eigene Kreation. Zweifarbiger Druck mit Magentplatte an Whiteboard befestigt.
140mm and 240mm
Introduction The algos suggested this awesome video by Smart Solution 4 Home . I tossed the creator $5 (optional), got the files, and printed them. Props to the creator, it's a brilliant design. However, I wanted to mount the rain gauge…
You bought a BVM D14H5. It came with a 16:9 faceplate. Face palm. And there's almost no way to get a 4:3 faceplate nowadays. So, we print our own. I provided arranged pieces called "AIO" so you can print the same colored pieces in one…
Temperature sensor holder for Testo 174H Need 2pcs M4x3mm countersunk head screw for case mounting
FPV MARK4HD FRAME MOUNT for GPS Goku GM10 Mini V3
I made this model to teach my kids the analog clock. It prints reasonably fast, and does not use too much filament. The minute markers and the numbers can be colored with a filament change. NB: This is only a learning tool. It is…
This is a remix of https://github.com/Annex-Engineering/Sherpa_Mini-Extruder It weighs less than 100g by using a very light motor. Print Settings Printer: Voron0 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: BEST-Q PC-CF…
FPV MARK4HD FRAME ANTENNA MOUNT DJI UNIT
Clamp Clamp incorporating a compliant mechanism, printable without support. Produced in 24 hours for the third edition of the 24H 3D Print Polytech Tours . This model responds to two themes simultaneously proposed during the competition:…
This was my first OpenSCAD project. It's a blank 4HP panel for Eurorack modular synthesizer systems. I printed it in EPLA Matte Black with no issues. Text can be modified in OpenSCAD.
FPV MARK4HD FRAME GOPRO MOUNT
I broke one, so I made one. Hope someone will find it useful. I Don't know if it is compatible to all Hager products. But for me as replacement it works nicely. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Max Rafts: Yes…
Chase for desk clock space invaders arcade Maschine has to scaled by 10 to fit to the other parts.
Wanted to secure my pen cut to the Cinque 24HD, regardless of Angle. clips to lower left edge
Get that pesky air moving. Good for getting colder air inside during night. Uses 150x24mm fan. I used https://www.delta-fan.com/AFB1524HH-AF00.html Case is nearly snap fit. You can glue it or put tape around the seam if you like to. Just…
This model was remixed from https://www.printables.com/en/model/320676-webcam-spacer-for-dell-monitor-u2414h https://www.printables.com/@Smoluch did a great job with the fitment for his Webcam spacer. Now you can print these to create…
Medical Bottle Small bottle with glass and compartment for storing tablets. Made in 24 hours for the second edition of the 24H 3D Polytech Tours . It responds to the theme of medicine, with the aim of making it easier for sufferers…
This Cabinet Magnet Case custom made is great to use on small spaces like kitchen cabinets or any other cabinet you might want to add a small magnetic lock! Print instructions Category: Household Summary This Cabinet Magnet Case custom…
I wanted to replace the standard antenna on my BetaFPV VR04 goggles. To do this, I removed the stock antenna and replaced it with 5.8Ghz SMA antenna ( link to what I used - I am not claiming this is the best choice, just my choice) RP-SMA…
As I wasn't going to be the main person running this in my household, I wanted to make it an easier experience that anyone can use without having to utilise any of the ESP features in the original model. Controlled by an Arduino Nano,…
This is a cable holder that will rest on the handle of your performance case with part of it fitting into the gap of the handle. The insert piece is optional but provides a place to store knurlies, picks, and other odds-and-ends. If you…
DIY Print Bed Filament Dryer PLA+ 55C 4hours added G28 W ; home all without mesh bed level to the G code like this G90 ; use absolute coordinates G28 W ; home all without mesh bed level G1 X100 Y200 Z200.0 F720 ; move x-axis to top to…
I had a 3U 4HP pique, and wanted to use it as a 1U module instead. You can pause before the top layer lines to filament switch, which will allow the labels to be more easily read. I used my Pique from ALA – but most of the standard 4HP…
Adapter for Cheap Chinese G4H watch with P50-x pogopins.
I've done it in PLA and TPU98a. I painted with a sharpie the asphalt parts… :)
A simple and practical desk stand that angles your datalogger perfectly for easy readability. Great for your desk, a shelf, or inside a 3D printer enclosure. Compatibility: Fits both Testo 174H and Testo 174T. Assembly: The 3D printed…
Inspired by others seen on Printables, but decided to go ahead and design my own. Printed with Flashforge Ad5mPro PLA 10% infill, its pretty solid for what it is. First fully self design.
This is an adapter for generic 3d printer enclosure of 80mm fan for the widley avaialble MC-V194H HEPA filter. The lid should not be required as its a tight fit, but i like more security. no support needed
This is a replica of figure H from the box "Tomb of Spells", number 5004 from Grenadier (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:G-albs-WW08h.jpg&oldid=198663 ) "Wraith" This figure remarkably stands on…
This is a simple 1x2x4 units high Gridfinity bin that holds 8 fountain pen ink sample vials. This specific item works with ink sample vials up to 15mm in diameter and works with the specific vials I have been using. I cannot guarantee it…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
I quite like this module. My mount holds the board by friction and it has 2 countersunk mounting holes spaced 25mm so the common DIN rail clips can be used to mount it to the DIN rail. Link to the SS4H-ESP32:…
I had to rebuild my Stealthburner front panel because I accidentally installed it off-by-one pin. Do this right, and it applies too much voltage to the LEDs and lets the smoke out of a small logic buffer on the HartK PCB with Fan LEDs . I…
HM80 HM90 Downside 4HDD
Holder for hero10/9 for hd version of mark4. You can also use rubber band to secure gopro so it wont fall out if tolerances arent perfect. But i can use it without bands perfectly. Print with support. Category: Hobby
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Hello, I recently bought this item and wanted a case to protect it from scratch ! So I decide to make one. I'm not a designer so be kind for ratio aspect xD Print it with TPU (PLA not tested and clearly not recommanded). I use preset…
Holder for coin magicians delivering 1-4 US half dollars at will. Short demo of its prototype that delivers up to 3 US half dollars: Designed in Hong Kong. Category: Tool Holders & Boxes
Its an extrusion from GPX data file about 30 laps in 24h MTB race in Coruche (Portugal) 2023. All done in single speed. I got 2nd place in Solo Single Speed.
Modular desk organizer consisting of several, and eventually a dozen or more, elements allowing for any arrangement. The elements are connected in a concealed way. No supports needed – prints great and fast at 0.26, both with PLA and PETG.
It´s an extrusion from GPX data file about 30 laps in 24h MTB race in Coruche (Portugal) 2022. All done in single speed.
The MiniDSP 2x4HD is a fantastic little device for sub calibration and active crossovers. But the placement of its inputs/outputs makes it surprisingly hard to mount in a living-room setup in a way that looks clean and “intentional” when…
Cable management for eurorack modular systems.
This is the bottom inspection cover for the zf 4hp22 transmission found in most NAS LR products, the trucks ive owned have usually had them missing. Recommend printing in something oil and heat resistant.
Yeah I 'm making the Self Balancing Cube Cubli by REMRC on youtube and github. My Nidec 24h motors got here and I realized the shaft wouldnt fit either reaction wheel, because mine have a 1.5mm chunk missing on the side. Wouldve just sent…
Butane is the four-carbon alkane found in lighters and camping stoves. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton and…
![Clamp [Participation : 24H Polytech 3D Print Tours 3rd Edition]](https://media.printables.com/media/prints/892867/images/6879185_447a3522-7b25-4d68-b58d-30d02bfbe250_dbf41c7f-7a7a-45cb-bfef-b707d410170e/clamp-0-presentation.png)
![Medical Bottle [Participation : 24H Polytech 3D Tours 2nd Edition]](https://media.printables.com/media/prints/892861/images/6879172_31e68c6a-0003-46f6-ab92-e1b056bc0eb7_1e65484f-aa88-461f-a109-2763a4982aed/bottle-0.png)
