566 modeli
Simple wall mount for your Apple TV, so it doesn't have to lie and float, but can instead hang neatly on a wall. Fits Apple TV bracket 4K (3rd generation) ATTENTION Does not fit the older models! Apple made the 3rd generation 4K slightly…
Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu
Remix of ewalk40's great design to fit the 2022 Apple TV 4k model.
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Key cap (cover) for standard 4KS keys ("SL") by the EVVA company.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wallmount for Spoolholder X2 The wall mount for the filament spool holder X2 can hold filament spools up to 4kg (or generally spools with a diameter of up to 36cm. With the spacers L, M and S, the distances for the different axes of the…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Battery Holder for Hama camera tripod (17 mm diameter), using a Zoom Q2n-4K camera. This is an better alternative to Zoom BCQ-2n battery pack using 4 x AA alkaline battery. The case is made for 10000mAh external battery. Internal…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description: This holder is for storing your apple tv remote securely in a drawer or on a wall. You can also print it with glow filament. That way, you can put the remote control away in the bedroom, even in the dark. Recommended print…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Slides over your Streaming Stick 4K to block -the status LED so it's dark in your room at night. -the reset button, so you won't accidentally block it. Printed on my Prusa MINI+ in Prusament rPLA in 0.25mm layer height.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Key cover for easier identification of which key is for which door. Print the cover with a layer height of 0.1 mm and enable Brim for better adhesion to the bed. Nakładka na klucz dla łatwiejszego rozróżnienia, jaki klucz jest, do jakich…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Needed a Vesamount for the AppleTV 4K for the TV in our Caravan. Its fixed with a NOVUS Sky 12N holder - thats why the dimensions like they are. It fits like a glove. Printed in PETG with 0.6 nozzle, 0,32mm layers and supports on. ---…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You don't need to use any support. I welcome your feedback!
My Apple TV quickly accumulated dust while it was sitting under my TV. I wanted a holder that I could attach to either the wall, VEGA mounting brackets on the back of the TV, or use 3M Command Strips depending on where the TV and Apple TV…
I recently bought a new Apple TV 4K (2022 model) that is slightly thinner with respect to older models and does not feature the fan. The model is inspired by https://www.printables.com/model/246813-apple-tv-4k-mount-walltv-stand but has…
It makes it easier to remove the battery. Especially helpful if you're using gloves or after flying you don't have much feeling in your fingertips :-) Added version with a pocket clip. Makes it easily accessible and easier to organise in…
We designed this print, to get the Apple TV mounted to the wall. Must be mounted with 3 screws. Fits the following Apple TV models Apple TV 4K (First gen) Apple TV 4K (Second gen) Apple TV HD . Does NOT fit the TV 4K third generation! For…
Took the deep v of the original model even deeper to accommodate the built in hard buttons for advertised services. Added #6 counter sunk screw holes with plenty of room on the back for double sided tape if that's your jam. Please post a…
Will make adjustments per request
When I started printing face shields, I wanted to use larger (4kg) spools. Since the Prusa MINI spool holder is very good, but the lower rails were too short I modified them (now they are 15mm longer). Here you can get the original STL…
Propeller Holder for DJI Mini 2 Should also fit DJI Mini SE and Mavic Mini and Mini 4k, although not tested. Please share if you try. Can be printed with PETG/PLA/etc or flexible filaments like TPU. I recommend changing no. of perimeters…
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Wall mount for an AppleTV 4K Gen 3 and its remote, I have only tested it in the Gen 3 4K, however it may fit the older 4K models but not the Non 4K versions. (Remix of Tactical_Dev's AppleTV wallmount bracket -…
This is a remix of KONEz*347 spool holder with 4x 608 bearings. I adjusted the rollers, no supports needed anymore and added a base to keep the feet together. This spool holder is 144mm wide, so it can handle almost every spool out there.…
Remix of @Matija_272939 's model on Printables Comments on the original Printables model flagged issues with the rear guard not fitting properly. Some of the comments suggested scaling the rear clip to 95% fixed the issue. I modified the…
The RetroTINK 4k is here and glorious. However it's kinda large due to all of it's available IO. An easy way to save space is to stand it upright in a vertical fashion. The stand also has a built in place for the remote control to go when…
U modelu Kit Card Ford-T 4k jsem poněkud upravil barevné řešení a hlavně doplnil snímatelnou střechu materiál PLA tryska 0,4 mm vrstvy 0,15 G-code tiskové soubory "43” a “46”jsou pro tisk jednobarevný, soubory “44” a “46b”pro barevný tisk…
With this minimal propeller cover, you can transport your DJI mini drone safely.
(Latest Model) - WI-FI + Ethernet
Companion project to my other parametric configurable FPV designs: FPV Pod | O4 O3 Frame Action2 , 3,4,5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your GoPro Hero 6 through 13 camera with the best mount in FPV! Max protection with…
A case to protect latest Apple TV 4K remote that was printed with PETG but could be also printed in other materials.
If you want to put it on a slightly curved surface (for example, the back of a monitor/tv), use the thicker foam tape, and just attach a strip on each edge of the back.
Small sturdy travel case for the DJI mini. Holds the drone, and remote tightly. Tested with the DJI mini 4k, but should also fit the mini 2, and mini 2SE. Ideal for travel. Can be printed without supports, print with 5-10% infill.
This is a 5 gram skid for use on a DJI Mini4K or Mini 2 lightweight drone. The skids weigh 5 grams and print easily; I used ASA but PETG or PLA should work too. The skids keep the props from mowing the grass when taking off and landing.…
ANYCUBIC Photon D2, Mono, Photon Mono 4K,Photon Ultra, 2pcs FEP Film frame. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Notes: I used some small supports only for screw…
Update: shout out to @kull_1740928 with a great suggestion. Added D-pad offset. Apple TV 4K remote TPU bumper will help protect your remote control from nicks and scratches. Also easier to hold the remote. Printed using TPU with no supports
Credit to polmdm The amount of screw holes was a bit excessive for me. The apple logo, although being a nice touch, also wasn't for me. These are the only changes to the original design by polmdm. I suggest printing at 102% scale for a…
U modelu Kit Card Ford-T 4k max jsem poněkud zvětšil tolerance pro snadnější montáž, kompletace sedaček je snadnější, upravil barevné řešení a hlavně doplnil snímatelnou střechu materiál PLA tryska 0,4 mm vrstvy 0,15 a 0,30 G-code tiskové…
A case & lid for the DJI Mini 4K drone case & lid, also should work for the Mini 2 / SE / 2 SE based on the drone dimensions from DJI's website - tested on the Mini 4k. Designed to fit pretty well to the shape of the drone, interior is…
A simple holder for the Siri Remote of the Apple TV 4K. It has a small recess on the back for a strip of double-sided adhesive tape. On the bottom, there is a cutout to charge the remote. Works with Siri Remote 2nd Gen. (A2540, Lightning)…
The mount is designed to easily attach the Apple TV to the VESA mount
Tired of losing my Amazon Fire TV Stick remote control down the sofa, this effectively solves that! Also the original remotes are quite fragile so this helps toughen them up quite a lot. Includes a handy poke hole to eject the remote when…
Apple TV 4K Mount - VESA 200. No Supports. A Remix of https://www.thingiverse.com/thing:3356180 Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.20 Infill: 20 Filament brand: Creality PLA…
UPDATED 3/13/2024: Verified VTX shell dimensions. Uploaded f3d option. ND Filter may need slight tolerance adjustment (or my 3d printer needs calibration...)
I couldn't find a wall mount for my Blu-ray films that I liked so I designed one. Each one will just require a small wall plug and screw, I designed in a tab on the left that has a matching hole on the right so that they interlock…
Slightly changed dimensions, and made it easier to insert bed, now fits Photon Mono 4K too.
Modified size for the slightly smaller Apple 4k (3rd generation)
I really like the Onn 4K Pro Streaming box, but it's not quite as easy to mount or hide as the standard Onn 4K streaming box. It's not designed to stick to the back of a TV with double sided tape or velcro. The 4K Pro is ideally set on…
The SCART-Lock for RetroTINK-4K slips over the top of a standard SCART connector. The thumb screw flanges securely anchor the SCART cable to your TINK so you can enjoy worry-free crispy RGB video. Purchase here:…
TPU case to protect the Anker 737 power bank. Print standing upright, supports are included where needed. Printed with 2 walls and 30% infill using a 0.4mm nozzle and NinjaTek NinjaFlex TPU with 85A hardness. As @KimBauters mentions, less…
A basic yet functional case for a power supply module. It can be easily printed. Similar modules should be compatible with them too, but I have tested only this one. To assemble the case, you need a drop or two of glue. You may need to…
Though there are already several similar holders out there, I wanted a special looking one, a little bit like Luigi Colani would have done, with some nice round shapes. Printed in PLA on an Elegoo Neptune X, but should work in SLA on the…
BASIC MODEL: ZK-4KX Buck Boost Converter
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Apple TV 4K 2022 remix without holes - the original one broke while printing
This is a lens cover for the Insta360 ONE RS 4K Boost Lens. I've designed it in Fusion 360 with a 0.15mm layer height and 0.4mm nozzle size in mind when picking dimensions. It fits perfectly after I printed it with my Prusa Mini using…
I needed a filament spool roller that operated smoothly with bearings for my dry box. I keep my 4kg carbon fiber nylon in the dry box until the spool is empty. This model fit the bill just needed it to be a little wider. I widened the…
Couldn't find an easy to print wall mount that didn't require supports so here it is. The screw holes are 4mm. Note that it can't be used on the latest version of Apple TV (They made it smaller). 9/3/23: New stuff! Added drawings for…
Just reversed the base orientation of both anchors from the original model by Terrywood02
I ended up re-modeling this adapter to 75mm x 75mm only and moving the VESA mount down to give clearance to the Display Port cable. Made to fit hardware and allow final mount assembling after monitor is reassembled. It is a tight and…
Handle anycubic photon mono 4k
Modell wurde um Ausschnitte für Kabelbinder oder Klettbänder erweitert. Vielen Dank an brahoy für die Vorlage.
New version of my tilted build plateholder. Now for the mono and mono 4k This is tilted in two axes. Therefore, the resin drips from one corner instead of one edge. To save some material, i designed some fancy cutouts. Excellent to print…
I needed a minimal light weight add-on to carry payloads. I suspend my package under the drone with light weight nanobraid fishing line. This clip snaps onto the bottom of the drone exactly at the center of gravity. It has a 4mm smooth…
A titled build plate holder for Any Cubic Photon Mono 4K resin printers. Loosely inspired by https://www.printables.com/model/116671-v2-anycubic-photon-mono-tiltet-build-plate-v2 - however I found that model didn't fit my Photon Mono 4K.…
Mini DC power supply Based on ZK-4KX DC to DC Buck Boost Converter Input: 5-30V Output: 0,5-30V; 4A Necessary parts: Its based on ZK-4KX DC DC Buck Boost Converter, that you can get for around 10€ from Aliexpress . For the banana plugs…
Looking for a quality drip hook mount for your Anycubic Photon Mono 4K? Look no further than my remix of Anycubic Photon Mono 4K drip hook mount! Short video: https://youtube.com/shorts/24oSgpB7lEA?feature=share
Mount for your Apple TV (4k, 3rd generation). This can be used on any flat or vertical surface - but was designed to be mounted under a table or desk. Includes features that allows for the AppleTV to be inserted or removed even when the…
This is a remix of polmdm 's original design. I've resized the model to fit the 2nd Gen (2021) model Apple TV 4K. The Apple logo has been removed in favor of slots for cooling and to save some material. The base is a bit thicker for…
Print in TPU and 100% infill with supports (that's what I did anyway on my a stock Anet A8)
This is my version of an Apple TV wall mount. Easily adheres to any (vertical) surface, like a wall, whiteboard, or side of a desk, using 3 small screws or 2 Command Strips. Securely holds the box in any orientation… wires up/down…
A Remix of https://www.thingiverse.com/thing:3356180 No Supports needed. For Apple TV 4K. Designed for use with the rear VESA mounting screws on a flat panel television. The mount suspends the ATV off the surface of your entertainment…
Sculpted bust of Fl4k from Borderlands
Simple enclosure for ZK-4KX or XK-4KX buck/boost DC-DC converter. A lot of big vent holes from all sides for better cooling. Wires can be mounted and dismounted without removing the device out of the case. An additional external fan is…
Update on remixes: Use the remixes! I initially made this incorrectly and somehow lost the correct version before uploading! Not taking it down to ensure the remixes dont get tagged somehow. The “wall mount” that comes with the S350 is…
Remix of Ben's Apple TV Siri Remote - AirTag Case to fit new model with USB-C connection. I printed with PLA, adaptive layer height, 4 perimeters, 0.6mm nozzle, on a Prusa Mini+.
Simple holder for Wallmart's Onn tv box controller
This is designed to work with the ZK-4KX , but will likely work with many similar products like the ZK-SMC01 Stepper Driver with a few mods. ZK-4KX Buck Boost Converter Panel/Lid 2x2x5 Gridfinity Container with ventilation Hexagons are…
Apple TV 4K wall mount for cleaning up the look of the home entertainment center. Kudos to Brahoy for the original design. I hate using supports if I don't have to, so I got into Fusion and drew it up with chamfers at the bottom corners.…
These cable guides are for the Dewalt USB Charger(DCB094K) and the matching USB-C cable. The cable should be able to loop around the adapter 3 times with a little slack at the turns. Two guides will need to be printed, one for each side.…
I designed this super light weight payload holder for the Mini 4K to carry loads suspended with two lines to keep the payload from twisting. I printed with PETG 100% infill, 3 perimeters. It snaps in place at the center of gravity. I have…
Made to attach the F7N rear camera (and any other system that uses this yumcha rear) to the rear window on the inside of a ute. Can change the angle for a sedan if there's any interest.
Needs to be printed with flexible material. V2 goes over thumb screw so the cap doesn't get lost while camera is in use…
Thanks to @SnopSnapi for the excellent model and sharing the CAD. I was able to import and quickly add some countersunk holes for M3 fasteners to hold the lid more securely. I attached with M3x10 SHCS and M3 Locknuts on the inside of the…
This is a wall mount for a SiliconDust HDHomeRun Flex 4K ATSC 3.0 NextGen TV tuner. Included are the associated Fusion 360 source .fd3 , .3mf, .stl, and G-Code (PTEG 15%, infill) files. Photo shows the top of the case facing out. However,…
V2 I think I fixed it all! This is a replacement/additional VAT for the Phrozen Sonic 4k with its 6.1inch LCD. It should also fit Phrozen Sonic Mini 4K. Together with Top- and Bottom-Cover. Rather then using Nuts I'm relying on long…
This is a holder to mount your Onn 4k Streaming Box to the back of your TV. There is a flat spot on the back for 2 sided tape to mount it.
A simple mount for an Onn 4k Pro (2026) streaming box. Designed with 2 countersunk holes for mounting with screws. Intended for use with ports facing upwards.
This is an versatile adjustable angle mount for the OBSBOT Tiny and OBSBOT Tiny 4k Pan/Tilt/Zoom camera. Hardware needed: For pivot arms: 2pc ¼" * 1 ¾" long hex head bolts 2pc ¼" nuts. 1pc ¼" (20TPI) * ¾" long hex head bolt for camera…
DJI Mini 2 / Mini 4K – Paper-Clip Payload Dropper A quick-fit, ultra-light clip that snaps onto the rear belly vents of a DJI Mini 2 or DJI Mini 4K. Slip in a regular paper-clip, bend it into a hook, tie on a light line, and you’ve got a…
Anker 737 PowerCore 24K bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/8yI4wjq 24000mAh Happy printing!
This model is compatible with the lego system.
WARNING: you MUST carefully work on your betaflight filters before flying this drone, otherwise you may burn your ESCs and/or your motors, it happened to me :'( The stock configuration created a strong frame resonance at 122Hz in my case,…
📌 Protective Cover for Xiaomi Mi Box S 4K Remote 🔹 Two versions available! ✅ Version 1 (V1) : Fits the older remote (~15 cm). ✅ Version 2 (V2) : Designed for the new remote (~16 cm). 💡 Bonus : A wall mount is included to store the remote…
Constructed with tpu material for a smoother texture that is anti-slip, anti-scratch, and protects your remote. Slim design with precise cutouts that give you complete control of the remote and keep it like new. Anti-Lost Functionality:…
Sun Hood and Viewfinder for Blackmagic Design Pocket Cinema Camera 4K & 6K I've made two versions of the Sun Hood. Both designs use a hinge to tilt up the Sun Hood and easily access the touch screen of the camera. -80mm mini Sun Hood…
Google TV Streamer wall mount You will need 3 of M2x4 screws M2x2.5x3.2 inserts Wings uses M4 screws - but you may redraw them based on your needs ___________________________________________________ I have printed this model on side,…
Sun hood designed for the Blackmagic Pocket Cinema 4K with the Smallrig 2343 Universal SSD Holder mounted on top, using one of the side ¼" threads on the Smallrig holder as the mounting point. I designed this using a 3D Scan of the back…
I designed this vertical stand for the PixelFX Morph 4k Video scaler. This stand places the Morph in a vertical orientation and adds some needed weight and bulk to it to keep it from slipping around. Add rubber feet to the bottom to…
BMPCC 4k/6k mod that solves a few problems with the BMPCC line: 1. Vastly improved battery life/low cost with NP-F batteries, and flexibility to balance weight/run time with NPF 550/750/950 support. Also add 2 standard 5.5mm output power…
I needed a build plate hanger for the mighty 4k, but all of the designs I found required fiddling with the bracket before use. This design replaces one of the handles so that you can simply loosen the knob, reorient the position and…
![print-in-place Landing skids for DJI Mini 2, Mini 4K drone [UPDATED]](https://media.printables.com/media/prints/cd1d2ea4-b05a-4c9f-8e33-aff682509338/images/11605224_92836e97-9b8d-472c-b412-5a83f33ecc83_6bcc2588-1b8c-432d-9f8b-a7dc1c174f7e/merge_088_107.png)
