501 modeli
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
cable holder (15x20 mm)
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation On cable channel corners, often cables are visible or open ends of the channel are visible. This cover gives a nice looking corner when the cable channel is visible. Print Printed with SUNLU PETG without supports Brim is…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The same model as the original, but with a 5x2mm version instead. My modifications were all done in Prusaslicer. The 3mf file contains all my (nonsense) changes with cylinders and negative cylinders, as I don't know CAD. If it's stupid…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
I was looking for a Super-Sized fidget star. Since I could not find one, I created this one. The photo shows the new larger size verses the original size. Please comment on your make
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
Wanted a way to store my brushes flat .
I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
A simple test print that should cover the bed with small squares. Each square is only 1 layer (at .2 mm) thick. I use this model to adjust my z-offset to just the right value - it's really nice to see uniform, clean, smooth squares. Print…
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
A gridfinity baseplate for Skadis
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
Hotwheels x IKEA x 3D printer. Introducing the Hotwheels Sannahed 25x25 Insert display solutions. All you need to do is print 6x. This will fit snugly into the frame and you can display 24 cars. Most of my HW collections are the shorter…
A remix of @nicohirsch purge bin for the Core One, but using 20x5x2MM Magnets!
Fidget magnet sword from TikTok remixed for 5x2 magnets. See the original for the hilt.
For use with CTS 288 Rotary knobs with and without button press. The Rotary knobs with button press are MUCH more durable than those without. The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm…
Box 113x95x25.5 mm (for lures)
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
To solve a maze is a great time for relaxation, concentration, perfect for childrens and adults. Large numbers of rooms, difficult orientation and the charm of finding the way out creates a pleasant experience. I want to share with you my…
Realistic looking pei sheet with texture to use in your slicer software.
These are two containers to place between kitchensink and wall for soap, brushes, sponges or whatever you want to put in. They are specialy made because my printbed (235x235) was to small for the other containers i found, so i just jumped…
❤ If you have questions or like this print, consider leaving a like, comment or a make. Thank you! ❤ Should fit on most print-beds due to the 21.5 x 21.5 cm size. You can add some personal touch by engraving a name in the top of the box…
It is a hideout for hamster or other small pet. Quick project that can fit to the standard 225x225 printer
Here's a tool to easily magnetise bases of mini's (reupload). To make life easier and a boring task quicker, I created these shims to rest the bases, put some glue down and drop a magnet on. This ensures that the polarity is correct, each…
Verbindungswinkel zur Verbindung oder Verstärkung. 5 mm Schraubenlöcher. 15x20x2mm - Ø Bohrung 5 mm
A cable clip for attaching flat ethernet cables to walls/skirting boards. I wanted some something to attach a new cable snaking through the house, to the wall. i didn't want to use nails so i designed this to use 10x10mm double sided…
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
Thread 15x2,5mm Recommended settings: Material: PLA or PET-G Layer height: 0,2mm Perimeters: 5 Infill: 50% Supports: YES Let me know how your print fits. :)
https://www.aliexpress.com/item/1005005986842547.html
I made this minimalist wall stand to hold 3 build plates size 235x235 mm, with or without nozzle cleaning silicone. The bottom part is made in two versions. One is with screw holes if you want to add screws to your holder to secure it…
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
Print & fan Print instructions Category: 3D Printing Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.1 Infill: 20
Layer height - 0.12-0.16, 3 perimeters Высота слоя - 0,12-0,16, 3 периметра.
2024-08-15 Updated to new version. V2 in files Tried to create more surface touch points ( bed adhesion ) and filled the lower circle. I have adjusted to print with a .10 layer height as I only had one layer between bottom and start of…
Print with 100% infill and use PLA for maximum strength. Objects printed vertically are stronger than horizontal ones, but using support messes up the threads.
This is simple yet useful adapter when your frame has 20x20mm mount holes but the FC is 25.5x25.5. Fits M2 screws and screw heads are hidden so when mounted everything is flat.
*Updated Aug. 24, 2025* After a few prints and some trial and error, I have made version 2.0 of this remix. I modified several things to make the wheel spin smoothly. I also changed the assembly instructions (original instructions PDF is…
Honeycomb storage wall holder 25x25mm, to be used with a hallow insert for the honeycomb wall. No supports needed.
A model of a mini deer skull or jackelope. utilizes (7) 5x2 mm magnets.
Slide box 7x5x2 cm Print settings 0,2mm layer 4 walls 15% infill no supports
Perimeters: 3mm height, 15cm wide, 20cm height optimal print: no auto color change, manual color change to 2,20mm bottom half: TPU or Prusa Flex top half: any solid non flexible (can also be printed with flexible, depends on preference)…
I remixed another mount on thingiverse and adapted this for my needs, removing extra plastic because I wanted simple and slim design to add on an HD-zero whoop 25x25 board onto a 30x30 flight controller stack. Printed this in PLA+ 0.2…
Display your favorite EDM car wherever* you want! (*if by wherever you mean any 15x20cm frame) I found this and some similar designs of Golf MK2's and wanted to make a gift for some friends of mine who recently bought one each (GL and…
Besides looking good in the renders (I tried!), the holder is functional and has been tested. I mention this because looks and function don't always go together. Actually, the last few versions involved adjustments of just tenths of a…
Holds 10 zyn cans in 2x5 gridfinity space. Should work with any other cans with about 70mm diameter as well.
Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
convert your 25.5x25.5 FC/VTX to 20x20 Category: Hobby
This little gadget is small, simple but powerful. I made this one because I needed customized display cables for my projects, which I usually make myself using Dupont connectors. Those connectors come with the benefit that they're pretty…
I decided to use the full 235x235mm bed space on my Ender 3 S1 with Klipper so the 220x220mm bed model no longer suitable for me. I re-measured the endstops coords and movable area. Danger: be aware of these two limiter bolts and cable…
Remix of the Goblin drone to suit more common 25x25mm Flight Controller such as the Happymodel X12 (5in1) I also added provision for a battery strap to the bottom of the body so the strap does not need to go around the entire drone. Top…
This insert was designed for 10 diamond files as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules. You can choose between two sizes: size 1: 150 x 60 mm (i.e. 5x2) Please…
Honeycomb storage wall with thicker outer walls for all printers with a print bed of at least 215x203mm.
RAM Ball Mount 25mm / 1 inch M5x20mm Yaesu FTM-500 FTM-400 Etc. I got aggravated when I couldn't find a 25mm ball with an M5x20 screw to hold the remote head of your mobile radio. This should work with the Yaesu FTM-500, 400 and any radio…
This rack was designed to hold 125 standard clay/plastic poker chips (39mm diameter). 5 stacks of 25 chips. The racks can be stacked on top of one another. Finger holes have also been added for easy removal of an entire stack of chips.…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Compatable with the real threadboards made by 3d print acadamy launched on kickstarter 0.2 layer height 3 walls 15% infill
A Gridfinity 5x2 holder for an RJ45 crimper and a wire stripper. Wanted to be able to store these in my drawer without taking up much height. My RJ45 crimper default position is open, so to put it in I need to close it, which the…
gridfinity large bin 5x2x6
Original model was very well designed, however I have reservations about having it completely enclosed with 65w output so I added vents to the top. Because of the added vents, its labels can no longer be on top so I also moved that to the…
This is a remix of original model created by Jallim Printed nice on Ender 3 S1 with PETG 0.2 mm layers. 2 perimeters, 2 bottom and 3 top layers. There is no need of supports. Tolerances for magnets are 5.3mm for 5mm magnet. Fits loose.…
Overview Display the Lego F1 Mini Car collection (all 12 cars) in an IKEA Sannahed 25x25 frame. Uses Lego style brick inserts to hold the cars in place. My Print Settings & Tips This model was designed and tested on a Snapmaker U1 using 4…
A simple 25x25 Compact QR for Seedsigner including a case with a sliding lid for sealing. Dimension Plate: 80x80x6mm Any ideas for improvments are welcome! Printinfo: Used wallgenerator “Arachne”
I made this from scratch based on a model I tried from Hanes244. His was for the Mimi+ version and was too small for my tiles. This box in a 5x2 configuration and each slot holds 11 of the standard tiles. I have printed this and based on…
mounting profile cap 25x25mm 3D PRINTING SETTINGS 0,2 mm layer height support not needed
Battletech stackable half height miniature storage tray 5x2 and 4x2, Stores 10 or 8 vehicles. Trays stack on each other (two trays stacked equal the size of one regular tray) It's stacking compatible with the 4x2 and 4x1 full height small…
20x20 To 25x25 Whoop Mount Adapter. One is centered and one is offset. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Infill: 20 Filament: any PLA any Category: R/C Vehicles
I have made a storage for the printing plates with a size of 235x235mm. The mounting is done with 4x20 screws. I have to fix the plates pushed in and the printed parts with double-sided tape fixed, then I screwed it tight.
Printed with PETG-CF M2x4x3.5 heat inserts No Supports needed Enjoy 😊
REMIX - only difference is the magnet sits centrally, at request. Here's a tool to easily magnetise bases of mini's (reupload). To make life easier and a boring task quicker, I created these shims to rest the bases, put some glue down and…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Back to the Future–inspired wall plaque featuring the Hill Valley clocktower,…
this model make hole for KCD1 switch KCD1 size 15x21 original model from https://www.printables.com/model/724543
bottom and lid from PLA, PETG, PCTG or ABS, 3 shells, 0,2 layerheight, 15% infill latch 2 peaces from PETG, PCTG or ABS, 4shells, 0,2 layerheight, 25% infill seal from TPU 4 shells, 0,15 layerheight, 20mm/s
bottom and lid from PLA, PETG, PCTG or ABS, 3 shells, 0,2 layerheight, 15% infill latch 2 peaces from PETG, PCTG or ABS, 4shells, 0,2 layerheight, 25% infill seal from TPU 4 shells, 0,15 layerheight, 20mm/s
Mount for a Chamber Temp Sensor (NTC 100K 5x25mm) Uses an M6x12 Screw and M6 T-Nut to mount
Ender 3 Pro prints 235 235 250 by going to Manage Printers, Machine Settings, and adjusting the X and Y values. Each corner circle is directly over a bed leveling screw. Category: 3D Printing Tests
This is an SFIC lock rack which can hold 10 total SFIC locks (5x2 grid). This came from the mind of cmfxa on Discord (LPU member). I simply helped him realize this idea via CAD and 3D printing. We agreed that this should be shared with…
Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…
Aft GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. It mimics the concept of the default 3D-printed GPS holder included with the frame, but enlarged for a 25 x 25 mm GPS module, such as the Team Blacksheep…
Canopy for 25.5X25.5 mount. You have to push the camera through the gap from behind at the top. It's a little small there, but it does the job. More versions coming.
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Stranger Things–themed wall plaque capturing the terrifying moment when the…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Wall art plaque featuring the classic T-Rex silhouette from Jurassic Park,…
Modeled this for the YRZ Freshman 5in frame adapts air unit for 20.5x20.5 mounting pattern Requires 4-M2 nuts to be installed 91828A111_18-8 Stainless Steel Hex Nut(4) I have printed and installed this, flown it a few times. Will upload…
blank 25x25 qr, filled with permanent marker, printed with bambulab ams tpu
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 1.5-2mm² cable M4 screw holes
Add support for printing
Please look at the several STL files , I plan to upload more in the future. Note that the feet can be mounted from the both sides (if needed at all) also note that all the OEM Biltema accessories will fitt. Enjoy !
Powerbank for 5x21700 battery's Board: Aliexpress link Features: Output: QuickCharge 4.0+, PowerDelivery 3.0, PPS, AFC, FCP, SCP, PE2.0, Vooc Input: PD3.0, AFC, SCP, PE1.1 Real / Tested: Out: 5v@3+A output (Maybe up to 5A - can't test)…
Great Design, I just added 4 5x2 magnets
A minimalistic and light weight mount to use a small and silent 25x25 mm fan with the dragon hotend. It is intended to fasten the fan with self-tapping screws. Of course, the attachment can also be adapted to the stp file. Print Settings…
Hi, I've designed new, more comfortable eyecups for VisionKing 5x25 binoculars. There is also new cup to fit new eyecups. It's printed with soft gum filament with 1% infill for eyecups. Category: Physics & Astronomy
![Sewing Thread Spools Storage Box [>80 spools, 21.5x21.5 cm]](https://media.printables.com/media/prints/803186/images/6217480_a61cd772-049a-4266-912c-08efb93e015f_eaa0d5c5-3c7f-4b5e-bcbd-ca638b07a77e/whatsapp-image-2024-03-12-at-200927.png)
![Honeycomb thicker outer walls [215x203]](https://media.printables.com/media/prints/580575/images/4635119_1ad4682c-bfab-4777-9b72-abd9570be0cb/honeycomb-walls.png)
