Liczymy pasujące modele…
Ultralight Glider - Start Trek (Star Trek Online STO) Odyssey Class USS Enterprise 1701-F. Print at 0.2mm layer height. Carefully remove from build plate (use scraper from front and slowly work your way down through the nacelles). If you…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Akro-Mils 20701 Bin: Fits in 10726, 10164, and 10144 units. One of mine got stepped on and broken, so I came up with this 'lil guy. This model is designed to be used with vase mode and should be a drop-in replacement except that they…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Iso 7010 - Warning Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. As the number of printing plates per profile is limited, the files are divided into several profiles. I have uploaded…
Update 8-26-2019: I have reprinted the USS in Polyalchemy Elixer Silver PLA As the previous one I printed I gave to my supervisor I have also added Printable inlays for the base to make the lettering and emblem pop. This is my rendition…
Iso 7010 - Prohibition Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. As the number of printing plates per profile is limited, the files are divided into several profiles. The Signs are…
The final... final frontier! The 5th generation 1701-Series Starship Enterprise from the show Star Trek: The Next Generation, now available to hang proudly from trees and light fixtures along side its older sister ship! Engage! Find TOS's…
Space: the final frontier. These are the voyages of the Starship Enterprise. Its five-year mission: to explore strange new worlds. To seek out new life and new civilizations. To boldly go where no man has gone before! First of the…
Tool mount and dust shoe for the Makita 700 series palm router or the Sienci AutoSpin T1 and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the…
ISO 7010 - Mandatory Signs Changelog: June 19, 2024: Added 2 new Signs (M061 & M062) Description: In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. As the number of printing plates per profile…
Hi folks, this is a nearly complete collection of warning symbols according to ISO 7010. These are by far not all symbols, but the most common ones and the ones I could easily access trough Wikimedia (link below). If you miss a sign and…
Iso 7010 - Fire protection Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. I have uploaded profiles for AMS and without AMS, the profiles without AMS have breaks at the appropriate…
ISO 7010 - Safe condition Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. As the number of printing plates per profile is limited, the files are divided into several profiles. I have…
ISO 7010 - Safe condition Signs (Emergency Exit with Directions) In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. I have uploaded profiles for AMS and without AMS, the profiles without AMS have…
This is a collection of all warning symbols (W001 - W067) according to ISO 7010. All the models are drawn by hand, so some minor differences to the norm can occure. The signs are based on the images from the following Wikipedia article “…
Model of the Enterprise from Star Trek II "Wrath of Khan". Print instructions I have cut the model in center Hull and Warp Engine tips to allow printing of the ship with the best detail and not support destroying detail. I printed the…
Star Trek Original Series Enterprise 1701
This model is compatible with the lego system.
Modeled with a combination of SolidWorks and Blender. The pieces print without support (except the deflector dish), and the latest version (3) can be assembled without glue. Use the included H-snap connector to join the major pieces. Use…
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
USS Enterprise (NCC-1701-D), or Enterprise-D, to distinguish it from other vessels with the same name, is a starship in the Star Trek media franchise. Under the command of Captain Jean-Luc Picard, it is the main setting of Star Trek: The…
I vectorized and transformed an original artwork by Will Pjigg into a design suitable for 3D printing, specifically to embellish my PC case. My computer is placed on an office cabinet next to me, and I thought its large black surface…
While building my own DIY CNC, I needed to cut some T-slots on the table so I can fix some clamps. I decided to design a new base for my Makita RT0701C so I could cut the slots equally spaced 3" apart. In the process of designing the base…
Hi folks, this is a not (yet) complete collection of prohibition symbols according to ISO 7010. These are by far not all symbols, but the most common ones and the ones I could easily access trough Wikimedia (link below). If you miss a…
This model is compatible with the lego system.
I designed this set of models to be replacement parts for the 1995 IBM ThinkPad 701C and 701CS laptops. The attached 3MF file is a project file created in OrcaSlicer that has everything laid out. I've also attached the STEP files as well.…
New and improved! Some have asked for one that is chamfered and stronger. So here it is. I've also included the f3d file. -------------------------------------- My 701 had the fork cables banging off the forks. Plus I wanted them off the…
I wanted a new stereo with Bluetooth and reversing camera for my old Volvo 940 and found a really cheap 2 DIN from China, only known as 7018B. It doesn't use a metal frame, the radio is put in the frame and then the entire thing is…
Three ZTE 5G Model MC7010 wall mount and Base Plate This is classed as an outdoor router. It uses a SIM card It needs to be mounted vertically outside the Sun.
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
currently setup ignition power A = Constant Bat+ 12v B = Constant Bat- 0V C = Ignition switched 12V Printed in PETG for durability crimp blue sleeves fully otherwise you can't insert them
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Hi folks, this is a not (yet) complete collection of mandatory symbols according to ISO 7010. These are by far not all symbols, but the most common ones and the ones I could easily access trough Wikimedia (link below). If you miss a sign…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
This is a remix of Nenzilla 's great (!) original model on Thingiverse (https://www.thingiverse.com/thing:3333439) - all credits for the "model kit like" design go to him. As the base model may have originated from a computer game it…
Hi folks, this is a not (yet) complete collection of emergency symbols according to ISO 7010. These are by far not all symbols, but the most common ones and the ones I could easily access trough Wikimedia (link below). If you miss a sign…
Tiny USS Enterprise (NCC-1701-D) Galaxy-class starship A tiny model of the USS Enterprise (NCC-1701-D) Galaxy-class starship from Star Trek Next Generation. Two print profiles: Full-colour and single-coloured print profiles. Material: PLA…
The Starship Enterprise NCC-1701 Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Ceiling projector/beamer mount (compatible with Viewsonic PX701HD) Parts: Bolts: 4x M4, 1x M8, 1x M10 Spring washers: 1x M4, 1x M8, 1x M10 Nuts: 1x M4, 1x M8, 1x M10 nuts Rubber/TPU flat washers: 2 - 4x M8 1x M10 Optionally a few flat…
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
Before you ask, yes, I do plan on making the Miranda-Class too. It would be unconscionable to leave it at the Enterprise. Where I go from there, only time will tell. I know it's a lot of files, but trust me, it's worth it. I designed it…
20. Mar. 2024 V1.0: first release ---------------------------------------------------------------------------------------------------------------- This is the first model from my new series "DUMMY 13 - Micirama" (Diorama by Mici). You can…
Also, sorry for the bad photos, and I just realized how filthy my helmet is… taking care of that now! I've seen several models of mounts for this helmet, but paying 90€ + shipping for a 10 g part seems a bit much. This is the 7th…
Silhouette of the Enterprise NCC-1701 Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made…
The Enterprise -B was launched at the beginning of the film Star Trek Generations (1994). During the ship's maiden voyage, prior to it being properly fitted with essential systems, the crew encountered an energy ribbon known as the Nexus,…
I made some warning sign magnets based on the ISO 7010 warning signs. Use a magnet with 10 mm diameter and 2 mm height. At the moment the following signs are avaiable: - W003: Radioactive material or ionizing radiation - W009: Biological…
Hi folks, this is a not (yet) complete collection of fire symbols according to ISO 7010. These are by far not all symbols, but the most common ones and the ones I could easily access trough Wikimedia (link below). If you miss a sign and…
Print using PLA or PETG. Add a M4 screw with butterfly nut. For the centering pin I used a 3mm old drill bit which I cut to size (about 10 mm) and inserted to the base by heating it first. You can view the Onshape design at…
This has been remixed for use with the Powertec 70130 dust collection hose (1" / 25mm Internal Diameter) from Amazon and to use readily available 12.7mm x 3.175mm Neodymium magnets. Update - Jan '25 : Added support for normal 1.25" / 32mm…
Disclaimer : Use it at your own risk. Road regulation in your country probably forbid such a modification. It is designed for 2020+ bikes or higher (despite it can probably used on other bikes) By adding this spacer on the rear speed…
Additional Signs from DIN 4844-2 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created without…
this is a drive 5.25" bay cover with grid for the DELL Optiplex 7010 it should fit the other models like 9010 etc. i arranged it that there is a continuous pattern in the form of the ventilation grille in the lower part of the computer…
USS Enterprise NCC-1701 (Strange New Worlds Edition) Bringe das Flaggschiff der Föderation auf deinen Schreibtisch! Dieses Modell basiert auf dem überarbeiteten Design der legendären Constitution-Klasse , wie sie in Star Trek: Strange New…
Additional Signs from DIN 4844-2 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created without…
Warning Sign Magnets - ISO 7010 This is a collection of ISO 7010 Warning Sign Magnets. They can be used in the kitchen as fridge magnets, in the workshop or as teaching aids on the whiteboard. For more Information I added a link to the…
The stands of these models seem to break often. A friend of mine needed a replacement. We only found one for the XL version so i remixed it to fit the normal / smaller version. Thanks to the accurately specified scales of the models, I…
The Uniball Jetstream SXR-80 refill lacks the metal sleeve that the Zebra F-701 pen refill usually comes with. This adapter aims to provides a reusable and repeatable solution for the Jetstream refills to replace the Zebra refills.…
I added alignment pegs for easier assembly and accurate placement of the pieces while gluing. Additionally, I created a hanger hook attachment. I also scaled it up to make a nicely sized model for a Prusa XL.
Makita 701 Tool Mount and Dust Shoe for the LowRider 4 CNC Modified to fit 40mm vacuum hose No supports needed
A gridfinity tray for the Wurth AS 4 electric screwdriver 5701300024 Should also fit the bosch go screwdriver!
My original stand for my die-cast model of the U.S.S. Enterprise NCC-1701-D shattered due to a fall, so I made a replacement. This one is a single piece, and the base is fashioned in the shape of the combadge from the show. Specifically,…
Additional Signs from DIN 4844-2, NEN 3011 & NF ISO 7010 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were…
Enterprise-E (NCC-1701-E) The USS Enterprise (NCC-1701-E) was a 24th century Federation Sovereign-class starship operated by Starfleet. This ship was the sixth Federation starship to bear the name Enterprise. On stardate 49827.5, the…
Add it to your creactions.
Detailed display model of the iconic USS Enterprise NCC-1701 starship from Star Trek.
Prohibition Sign Magnets - ISO 7010 This is a collection of ISO 7010 Prohibition Sign Magnets. They can be used in the kitchen as fridge magnets, in the workshop or as teaching aids on the whiteboard. For more Information I added a link…
Standard clip mount. Note - there is about a 1.3mm gap at least with my clips, which I had from a old cheap chinese cam, I rectified that gap with a two 1.2mm pieces of rubber (10x35mm) and now the fit is perfect. Printed with PLA, PETG…
I designed this part so I could use the Makita RT0701c as the spindle for my Genmitsu CNC 3020. I wanted to use the original Z axis components cuz I'm cheap and this is a printed part and less than super-rigid anyway. Parts needed: Stock…
This is a fix for the elastic bands in AKG K701, K702, K712, and AKG K7XX headphones. It's been tested on the K712 Pro and should work for similar models. You'll need an elastic hair tie and glue for installation. If you want to you can…
Router: Makita RT0701 or DRT50 (¼" routers) Vacuum: BOSCH GAS18V-3 (Hose Part Number: 1600A011RL) Support needed for the best prints.
housing for the cheap HU, wanted to make a portable tool battery operated player but it wasn't fully developed due to lack of time It could be at least used for a template, I have made a head unit model (fresh, not scanned) my other…
Additional Signs from DIN 4844-2 & NEN 3011 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created…
The Plano model 3701 storage unit is a handy size case for all sorts of smaller parts. But even with the dividers it has, it isn't very efficient when it comes to really small parts. So I designed up some bins to fit inside the organizer…
This is a remix of Martin's NCC-1701 Stand for the USS Enterprise
Additional Signs from DIN 4844-2 & NEN 3011 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created…
Nice lithophane, where you still have to put a light behind it.
Table stand for ZTE MC7010 5G antenna. Parts will fit tightly together. No glue required. I recommend to print with PLA as the tolerance of the parts may not be enough for other filaments. Use supports just in case to get a good fit for…
For my shelf, I needed a smaller stand for my LEGO 10356 "Star Trek: U.S.S. Enterprise NCC-1701-D" build. This stand is shorter and angled 10 degrees to the side to avoid only support the one side. A hole is included to slide the plaque…
*Update I did not see that https://www.prusaprinters.org/social/1022-dsk001 Has a model named Millenium Enterprise and do not want to step on toes so I have renamed it the NCC1701-Falcon. So I had a thought and I wanted to see it happen…
Inventum AC701 Secondary Intake Hose Adapter / Dual Hose Conversion This is an air duct adapter for the Inventum AC701 portable air conditioner. It allows you to add a secondary intake hose to the rear intake side of the unit. Single-hose…
This is a quick Model of a cage for the SmallHD 700 series of monitors. I quickly modelled it up and haven't tested it, print with TPU or PETG, supports needed. I'll likely go back to improve the model and add a few more features once I…
A wall decoration / art of the ‘USS Enterprise NCC 1701-D’ from Star Trek. This model have two parts and measures ~610x160x7mm
I realy liked Tims Lenovo Rack mount and I was really glad he also uploaded the step file for it. I adapted it for the Fujitsu mini PC lineup (Futro / Esprimo G). The Keystone holes are at exactly the same place as the original Lenovo…
just a little mashup to flame the geeks
Futaba R7014SB mount plate with 4 M3 bolts and a scotch to keep the receiver in place V2 has better scotch channel Use supports from build plate If you found this useful, please donate what you think it is worth to my paypal.me. Help…
The Enterprise NCC-1701. No bloody A, B, C, or D!!! It's my first attempt to design the Enterprise from scratch. It is certainly not an accurate model, but I tried my best. The reason that I chose this model, is that is just geometrical…
This is a simple recreation of the plastic rings on the bottom of the standard earpads used with the AKG 701 (and other compatible ones). It will allow you to test many 3rd party earpads (standard 100 mm ones) and see which one works best…
Don't want to pay for a 70$ HVA key ? Print the cover and use it on a blank key. — I retro-enginered the 701 key from Husqvarna because I destroy a key into my motorcycle. This model isn't 100% close to the original key because some curve…
The handle switch for my rototiller broke. Took a while to reverse engineer it but I did make this working model. It is still in service over a year later. I think the center pin is just a touch too tight but I sanded it out and its fine.…
Print with 0.2mm nozzle, 0.1mm layer height, high infill for best results. This can be used with pushers or rods, in order to test the movement while it's out of the case, as well as to hold the reset button during setting of the chrono…
Gopro mount for helmet LS2 MX701 explorer.
The printing does not present any particular issues. You can print in PLA or other materials. As you can see from the images and the project, the 'UPPER' and 'DOWN' components require a brim. The 'DOWN' component also needs supports. Be…
A 3 - 5mm drywall screw is required to attach.
I designed it ultralight and found the glowing filament ideal. I'm not sure if upscaling fits bigger pliers. But feel free to try.
I lost my wrench for the router, so I created this one. It fits snug over the nut and allows you to spin it off quick. I have two versions one is thinner and one is “chonky”. no supports required to print.
This is a remix of Martin's stand for the USS Enterprise
My WM-703C didn't come with a battery cover for the gumstick battery compartment, so I modeled a new one for it. A 0.2mm nozzle is kind of mandatory, unless you want to do a lot of post processing. My covers fit without any sanding,…
