Liczymy pasujące modele…
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Created this barcode scanner holder for the C750 but also works for the C740 / C990. Prints without support on the side.
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Model of the Mitsubishi roof trim clips that fit most Lancer + Ralliart and EVO from 2008. I did print a douzain out of PC and Nylon with a 0.25mm nozzle and it worked like an original part. The price of the original part is outrageous.…
This model is compatible with the lego system.
UPDATE: V1.1 has improved pin shape for easier mounting. I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.…
Quick modification of the Futro S740 19 inch mount by @d3n1zg for a 10 inch rack. Use two M2.5x6 flat head screws for fixing the Futro to the mount.
Description A 19-inch, 2-piece, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here…
Another under desk or wall mount for a Dell Latitude 7400 series laptop. Suitable to avoid cooling fans block the fansm. Some side opening for ports. Small 3 mm screws all. The idea was to stick it only with double-sided gel tape but i…
Do you love old volvos? Own old volvos? Or just like a cars in general. Well here you have the latest addition to you kitchen perfect for this christmas. Cookie cutters that are made to be 1/50 times the size of their normal counterpart…
Use your charger to also hold your Philips Norelco multigroom trimmer! This was designed around the MG3740 trimmer and included A00390 charger. You can print in the default orientation, but I do recommend printing at a 45° angle instead…
Orange Juicer 3D Model – 3 Sizes Available (420ml, 590ml, 740ml) Designed specifically for large oranges, this juicer comes in three sizes: 420ml, 590ml, and 740ml. Each size is perfect for extracting the maximum amount of juice…
Eine Wandhalterung für einen Fujitsu Futro S740 inkl . Fixierung. Materialliste: 3x Dübel Fischer DuoPower 6 x 30 S https://amzn.to/3B8n8rg 3x SPAX Universalschraube, 4,5 x 30 mm https://amzn.to/3TCtTb8 --- A wall mount for a Fujitsu…
i bought the Fujutsi futro S740 cheap as a home server for smart home stuff. due to it was used i got no stand with it. here are 2 options for that for every stand you need part A and part B i printed that in ABS on my Voron
This is the EXTREMELY rare Shimano TL-FH10 Dura-Ace 7400 freehub removal tool from the 1980s/early '90s. Only 3-5 of these come up on e-bay every year and they sell for $60-100 each for what is essentially a SINGLE BOLT. Not only did I…
Feets for the Fujitsu Futro s740 thin client computer. Just use them in place of the original ones FreeCad files are added, so you are free to midify it to your needs. The repair connector is used in case the original studs are broken…
This stand fits into the base of the Miller Manufacturing 1 Quart Screw-on Poutry Waterer Model 740 to raise it 50mm (about 2in) to reduce the amount of shavings kicked into the water.
In 1993 Märklin released a gauge 1 / 1:32 model of a DB (German railways) maintenance train (Rottenkraftwagen.) Model# 5739 (digital) and 5740 (analog) were actually designed and produced by Hübner. They are heavy, solid models, mostly…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Fujitsu Futro S740 This bracket is designed specifically for the Fujitsu Futro S740 switch, offering a clean and secure fit in your 10-inch rack…
I realy liked Tims Lenovo Rack mount and I was really glad he also uploaded the step file for it. I adapted it for the Fujitsu mini PC lineup (Futro / Esprimo G). The Keystone holes are at exactly the same place as the original Lenovo…
Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20mm Infill: 25% Filament brand: Clas Ohlson Filament color: Black Filament material: PLA
Volvo 740 dash blank. Printed with PLA fine. Print slowly. May fit other Volovs
This is a replacement bracket for the spoiler mounted fog light on the Volvo 700 series cars. The mount is made to be strong enough even if printed in PLA, but a more durable plastic like PETG is recommended. It should fit Volvo 740…
Replacement lid flap for the ninja blender bl740
I have purchased a new Volvo 940, first one in 14 years. Back then I only had a stick welder to do stuff and hand tools. Now I got 3D printers, so when it was time for me to increase power in my 940 Turbo. Injectors and MAF housing will…
***BETA*** This remix of my 10 inch rack mount for the HP T740 ‘thin client’ requested by another user, making it for a 19 inch rack, holding 2 systems instead of one. Printing notes Requires 250mm bed PETG-CF or similar heat resistant…
This is a caddy rail for 3.5" harddrives on a Fujitsu Celsius M740 Power. It has been remixed from bbountyhunterr's Fujitsu Celsius Etna D3128 SSD Caddy Rail. I have designed two variants, one requiring HDD mounting screws and one…
This model is compatible with the lego system.
***UPDATE 2/26*** Added a <BETA> small bed version, with separate ears , will just fit 200mm bed when rotated 45° 210mm build height. Requires 4 x M4 conical head screws, no longer then 15mm. to attach ears to main frame. ***UPDATE…
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
This is a vented top lid for the HP T740 thin client, it is affixed with magnets to the metal underframe, this mod allows for better airflow. This machine can get very warm when higher power draw expansion cards are installed or rack…
A simple coin tray a friend asked me for.
The original model seemed like a great option for me to adapt for my car. It might also fit a Volvo 940. I printed it vertically with supports for a better appearance.
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
Never been a fan of the “A-beam” gauge mounting cluster, former owner had loosely mounted one. So I decided this time I would just remove the ash tray and that little storage compartment which I never use anyways so. Here it is, 3 gauges…
Для печати отлично подходит ТПУ 95А. При необходимости отверстия пройти сверлом. Печать без поддержек со 100% заполнением.
Mount used to attach an Fujitsu S740 Thinclient to an Ikea Skadis board. The depth of the inside of the Bracket is 37mm, hight is 47mm. — Printing Details — Printed on Bambu Lab X1C Regular PLA 15% Infill — Changelog — 07.06.2023 - Upload…
Requires 3x M6 Nuts and appropriate length M6 screws. Some cutting of the sound deadening is required, aswell as trimming of the plastic “tray” under the steering wheel/around the throttle pedal) Only tested with Hella part number…
Overviews This is a custom 3D printable GPU bracket designed specifically to fit the Dell Radeon RX 7400 (and similar low-profile variants) into the Lenovo Tiny series (P340, P350, P360, and other Tiny 6 chassis styles). This bracket is a…
Only tested with MKM aftermarket steel pedal but should be the same with an OEM pedal.
Belt sanders produce a lot of sawdust. To keep my shop sawdust under control (more or less), I connect all power tools to a shop vacuum equipped with a HEPA filter when I use them. This adapter allows me to connect my Ridgid R2740 belt…
This is a set of parts to turn a Rubbermaid FG7M7400CHILI 21-Cup Food Container into a drybox to fit a normal 20-21 cm diameter spool, up to 7.5 cm wide. I made it to store my spool of Atomic Carbon Fibre Nuclear Nylon separately from the…
Dieselová lokomotiva řady 740. Československá výroba, vyráběná v letech 1973–1989. Určena pro zahradní železnici v měřítku „G“ . Jednoduchý tisk. Doporučená vrstva 0,2 mm. Příprava pro LED osvětlení. Pro 2 ks továrních podvozků LGB 78 mm…
Since I couldn't find a suitable model for a vertical stand again, I used a different design as a template and adapted it to the larger version of the HP T740.
The Remington Woodsmaster Model 740 is a semi-automatic rifle manufactured by Remington Arms between 1955 and 1959. There are not many aftermarket parts officially noted by remington including a forgrip. I designed a more modern design…
lego 6180 6179 6178 6205 88646 4151 33909 41740
I needs some stands for my HP T740 Thin Clients, the org. ones are much to big and very expensive in aftermarket. You will need 2x M2 screw to fit them. Hight is needed for some airflow. Printes in PLA, with 3 Walls and 15% infill,…
This is designed for the Series 7400 Kraftform adjustable torque screwdrivers and will mount it onto the Skadis Holder.
print two of each. Includes recess for the power cord.
This is a SSD/HDD mounting bracket for Fujitsu Futro S740 thin clients. It is used to mount the drive in the case, connected with a SATA/USB cable that is pulled through the USB-C opening. It might be useful to shorten the mounting tab on…
Another Volvo 940 Turbo part. I wanted a more high flowing air filter, that also sucks in cold air and is "shielded" from the warm air in the engine bay. So I came up with this tube design, that utilizes the stock hole that is not…
Door hook for dryer Bosch Siemens 00154074
A common problem with the volvo 740 is the weak turn signal handles. This print fixes this by extending the broken part. Use a glue gun or something similar to attach the 3d print to the blinker handle.
A simple locking mechanism I made for the louver/jalussi accessory to Volvo 740.
Description A 19-inch, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here to see…
Hello, very easy to print such vertilcal stand for latitude 7400. Regards Jonweb Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Resolution:** 0.24 Infill: 40% **Filament:** Aceaddity PLA grey Category: Other
A super mega ultra extendo version of the simple 1 7/8" vacuum attachment to obtain a whopping 790mm or 29 inches of width. Perfect for cleaning large hangar or garage floors. This version prints in 3 pieces. Download the 3 pieces, and…
Clips must be added with superglue :)
The Remington Woodsmaster Model 740 is a semi-automatic rifle manufactured by Remington Arms between 1955 and 1959. There are not many aftermarket parts officially noted by remington including a forgrip. I designed a more modern design…
I printed my version in Prusament PETG Galaxy Black. Because of how the computer mounts to the adapter, PETG is preferred. No supports are required and it should print fine without a brim, at least on a PEI build surface with PETG. Fits…
This model is compatible with the lego system.
If you have a Corsair Carbide Air 740 you might noticed the little hatch at the front panel? I wanted to mount some additional connectors their, e.g. a USB-C connector. Because I can't find any part to mount stuff there, I modeled one.…
Expresscard 34 blank profiled for HP EliteBook 2740p to fit flush and house a spare SD card.
Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.
Hello, My fuel pump gas throttle plastic part broke on my 1990 Volvo 740 Diesel so I have designed a new one, cause I needed to drive the next day. First 2 versions broke, so these 2 are the result of testing, failing and learning.…
Besides this model, you'll also need 1x CSD_Salzburg's "Universal Hook" to attach it to the Skadis. I've printed mine with PLA at default OrcaSlicer settings (3 wall loops, 15% infill density) on a Elegoo Neptune 4 Pro. Unfortunately…
Part printed using a Prusa MK4S with PETG filament and a 0.25mm nozzle; print settings: "0.07mm details". Onshape link for any modifications to the small bore :…
You have to trim the sites away a bit to make the cupholder fit. AliExpress: Auto Tasse Halter Für Audi C5 A6 1998-2005 A4 1998-2002 Faltbare Anti-slip Tasse Rack Trinken flasche Halter 4B0862534D Auto Zubehör - AliExpress 34 Amazon: Auto…
A simple model of th sway bar bushing in the front, for the 22mm diameter bar.
Some simple seals to prevent vacuum or boost leaks, couldn't find any reseller sotcking replacements for the throttle linkage side, and while I was at it I figured I could do one for the O-ring side as well.
ESRack module for Fujitsu Futro S740ESRack module for Fujitsu Futro S740 Fitting to the fabulous ESRack Ecosystem by EvilProphet Suggested Print Settings Material: PETG Nozzle: 0.4 mm Layer height: 0.25 mm Wall loops: 3 Top/Bottom shell…
This is a SSD/HDD (reversed) mounting bracket for Fujitsu Futro S740 or S7010 thin clients. It is used to mount the 2.5" drive in the case. I needed a reversed version as I am using the internal SATA (after adding power connector, SATA…
I like my keyboard to have more of an angle then the stock legs provide. Designed in Fusion 360. Printed in PETG, but probably any filament will work. Split the model into the two sides in the slicer, then lay them flat side down on the…
The plate was made in 5083 cast alu, pre-milled for flatness. The round plug was made out of PET, I think it was. We do not sort our plastics well at work. The plate recieves a O-ring with the dimension of 50x3.5mm, so IDxThickness. The…
Известна крыльчатка вентилятора без ограждения, выполненная из эластичного материала, у которой, с целью повышения безопасности работы, на периферии с тыльной стороны каждой лопасти выполнено утолщение, а входная и выходная кромки…
The cheap replacement for A6397401535 i bought from Aliexpress came with a super flimsy washer clip that was supposed to secure one of the rods. It broke easily when inserting the rod. So here is a replacemement to save us from sending…
Didn't have the right fittings for connecting the dust extractor to the third dust port on the CNC so I designed one that steps down from a 140mm hose to 110mm. There's heaps of clearance to the metal back panel.
Hey guys, some days ago i broke the hook of my rear light. Since there is no replacement to buy even tho you could screw the broken part of and replace it, I designed a plate, that fits on the existing light and it has a hook for the…
Tamiya 74023 BUILDER'S 8 pc Screwdriver set holder, usefull to replace the original plastic one.
Replacement model of the lid opening button for Bosch TWK7403 electric kettle. Supports are required. Recommended material: ASA/ABS.
Used thread: M27 x 3. I recommend using the finest layers because the thread is much smoother than.
Some feet for my keyboard. The new ones are a bit taller as the old ones. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Other
Basically everything the same like original except the holes for the screws
TPU, 100% infill Needs 2 per side
Cone 740 mm tall https://youtu.be/pY1Pup1hL1w Category: 3D Printing
Printed from TPU filament
Untested! You need to reuse the metal sleeves from the original bushings. 100% Infill TPU Need to print one of each
Zweiteilige Wandhalterung für Omada by tp-link ER7406, welche insgesamt mit fünf Schrauben der Größe M4 an der Wand befestigt werden kann. Die mittlere Schraube am Steg verbindet beide Elemente miteinander. Darüber hinaus befinden sich an…
This is a laptop stand so that it stands vertically on your desk giving you more space. Here are three versions for different laptop thicknesses 23, 24 and 37 mm.
This is my take to put a Dell 7400 2-1 Laptop onto my Toolwall. It can be easily removed (altough I will not remove it, as it has a broken battery + keyboard anyway). In the picture, you see two “left” brackets, because I ran out of black…
It holds the handle and bits securely while still easy to remove bits. A compact solution that allows the shape and size of the bit to be marked on the housing.
This is a quick design to use a standard switch instead of the often broken G7400 Power switch. It may be used or adapte
SKÅDIS Mount for TP-LINK WR740N This is a simple custom mount I designed to securely attach my old TP-LINK WR740N router to an IKEA SKÅDIS pegboard. It's part of my server rack setup (Labrax), where I use the SKÅDIS panel for organizing…
The BEKO Cafe Esperto CEG7404C bean-to-cup coffee machine accepts ground coffee (decaf etc.) though a bypass hole on the top. This hole is a bit small, and I found myself making a mess. So I designed this funnel with replaced the OEM…
This mandrel is convenient for repairing the lock cylinder. The result is perfect, without visible damage. Print from hard plastic
